Manual

Troubleshooting 8-19
Error
code
Error message Recommended Action
8120
Unsupported DIMM detected in DIMM group
#1.
8121
Unsupported DIMM detected in DIMM group
#2.
8122
Unsupported DIMM detected in DIMM group
#3.
Contact your service representative to
replace the four DIMMs in the relevant
group.
8130 Mismatch DIMM detected in DIMM group #1.
8131 Mismatch DIMM detected in DIMM group #2.
8132 Mismatch DIMM detected in DIMM group #3.
See the labels put on the DIMMs to make
sure that the DIMMs of the same type are
installed in groups. If DIMMs of different
types are installed in one or more groups,
contact the service representative to replace
DIMMs properly.
8140 DIMM group #1 with error is enabled.
8141 DIMM group #2 with error is enabled.
8142 DIMM group #3 with error is enabled.
Contact your service representative to
replace the four DIMMs in the relevant
group.
8150 NVRAM Cleared By Jumper.
8151 Password Cleared By Jumper.
Turn off the power. Then recover the
jumper setting to the original setting.
8160 Mismatch Processor Speed detected on
Processor 1.
8161 Mismatch Processor Speed detected on
Processor 2.
8162 Mismatch Processor Speed detected on
Processor 3.
8163 Mismatch Processor Speed detected on
Processor 4.
Check the frequency of the CPU. If it is
unknown, contact your service
representative.
8170 Processor 1 not operating at intended
frequency
8171 Processor 2 not operating at intended
frequency
8172 Processor 3 not operating at intended
frequency
8173 Processor 4 not operating at intended
frequency
817F All processors not operating at intended
frequency
8200 Online Spare Memory was not ready. DIMM type mismatch is detected when the
online spare memory feature is enabled.
Contact your service representative.
8201 Mirroring Memory was not ready. DIMM type mismatch is detected or
unnecessary installation in group #2 is
detected when the online spare memory
feature is enabled. Check the DIMM type or
installation. If the error cannot be corrected,
contact your service representative.