- Nec Network Printer Configuration Guide

vii
Create a Printer Object 4-18
Create a Print Server Object 4-18
Assign the Print Queue Object to the
Printer Object 4-18
Assign the Printer Object to the Print
Server Object 4-19
Exit NetWare Administrator 4-19
Enable the Remote Printer 4-19
Enable the Remote Printer if the Print Server
Resides on a File Server (NLM Print
Server) 4-19
Enable the Remote Printer if the Print Server
Resides on a Workstation (Dedicated DOS
Print Server) 4-19
Enable the Remote Printer if it is Connected to
a Workstation With a Parallel Cable 4-19
Windows 95 Using TCP/IP Protocol 4-20
Install Software 4-20
Install the Windows 95 Printing System
Utility 4-20
Install TCP/IP Protocol on Windows 95 4-22
Verify Printer Driver Installation 4-22
Establish the Printer on the Network 4-23
Define New Printer Ports 4-24
Windows NT Using TCP/IP Protocol 4-25
Install the Software 4-25
Identify the Printer 4-26
UNIX Using TCP/IP Protocol 4-27
Identify the Printer 4-27
Establish the Printer on the Host Computer 4-28
Add the Silentwriter to the /etc/
printcap File 4-28
Set Up Remote Printing 4-28
Send Documents to the Printer 4-29
Printing With the lpr Command 4-29
Printing With the ftp Command 4-29
Windows NT Using DLC Protocol 4-30
Install the Software 4-30
Identifying the Printer 4-31
AppleTalk 4-32
Select the Network 4-32
Select the Printer 4-33
LAN Manager v2.2 4-34
Install Software 4-34
Identify the Printer 4-35
Print a Document 4-35
OS/2 Warp Server or LAN Server v4.0 4-36
Install Software 4-36
Identify the Printer 4-37
Print a Document 4-38
SNMP 4-39
C
HAPTER
5 NEC 1765 A
DMINISTRATION
S
OFT
-
WARE
Overview 5-1
NEC 1765 Software 5-1
NEC 1765 Administration Software for NetWare 5-3
Using NEC 1765 Administration Software for
NetWare 5-3
Displaying Available Printers 5-3
Displaying LAN Card Parameters 5-4
Changing the Printer Name 5-4
Changing the Printer Polling Rate 5-4