NEC Storage Manager Messages Handbook IS010-12E
© NEC Corporation 2001-2004 No part of the contents of this book may be reproduced or transmitted in any form without permission of NEC Corporation. The contents of this book may be modified without notice in the future.
Preface This manual explains messages handled by NEC Storage Manager. IDs. The messages are listed in the order of message Refer to the “NEC Storage Manager Manual Guide” (IS901) for the overview of the NEC Storage and the related manuals. Remarks 1.
5. The following descriptions in the text of this manual refer to the corresponding manuals.
Contents Chapter 1 Messages and Output Destinations ..................................................................................................................1 1.1 Message Classification ................................................................................................................................................3 1.2 Message Output Destinations ......................................................................................................................................4 1.
This page is intentionally left blank.
Chapter 1 Messages and Output Destinations Chapter 1 Messages and Output Destinations The Storage Manager outputs the information, which is required for maintenance and operation of a disk array and the Storage Manager, to log files of the console/terminal and the management server. The log files to which a message is output are syslog, event log, and operation log.
Chapter 1 Messages and Output Destinations Management server Output to syslog (UNIX) or event log (Windows) Storage Manager Syslog or event log Operation log Output to console/terminal Disk array Console/Terminal Output to ESMPRO Manager when ESMPRO Business server Agent installed (only for Windows) Output to console/terminal Output to syslog (UNIX) or event log (Windows) ReplicationControl Syslog or event log Operation log Figure 1-1 Overview of Message Output 2
Chapter 1 Messages and Output Destinations 11..11 M Meessssaag gee C Cllaassssiiffiiccaattiio on n A message classification is assigned to a message, according to its level of urgency. Messages are classified into the following four classifications, in the order of urgency: “ERROR”, “WARNING”, “NOTICE”, and “INFO”. A message classification is also referred to as a message level.
Chapter 1 Messages and Output Destinations 11..22 M Meessssaag gee O Ou uttp pu utt D Deessttiin naattiio on nss The output destinations of messages depend on functions and OS to be used. the console/terminal, operation log, syslog, event log, and ESMPRO Manager. Output destinations are Message output destinations are described as follows: y Console/Terminal A console is a monitoring terminal that is directly connected to the monitoring server of the iSM.
Chapter 1 Messages and Output Destinations y syslog This is output on UNIX system. Together with the messages output by UNIX, the messages output from iSM and ReplicationControl are recorded. The output format depends on the OS (HP-UX or Solaris). Output/no output or output destinations of messages, which is output to syslog, can be specified by modifying descriptions for type (level) and function (facility) in OS settings file (/etc/syslog.conf).
Chapter 1 Messages and Output Destinations 11..33 M Meessssaag gee O Ou uttp pu utt F Fo orrm maatt This section describes the message output format and the errno output rule. For details on the message text, refer to Chapter 2 “Message List”.
Chapter 1 Messages and Output Destinations y UNIX system 1. A defined value is output as is.
Chapter 2 Message List Chapter 2 Message List 22..11 IIn ntteerrp prreettaattiio on no off M Meessssaag gee L Liisstt 2.2 “Message List” describes the messages in the order of message IDs. The message are described in the following format: iSMxxxxx: AAAAA, Message ID (iSMxxxxx) and message body (AAAAA,) are described. Descriptions using parentheses such as and indicate that parameter values are not fixed.
Chapter 2 Message List 22..22 M Meessssaag gee L Liisstt iSM01000 ∼ iSM01001: Storage Manager has started [Classification] INFO [Explanation] It shows that iSM server has started. For Windows, this message is target of ESMPRO Manager Report. [Measures] Unnecessary iSM01002: Storage Manager is ready [Classification] INFO [Explanation] It shows that iSM server has become capable of operation. For Windows, this message is target of ESMPRO Manager Report.
Chapter 2 Message List iSM01004: Storage Manager has terminated emergency [Classification] WARNING [Explanation] Emergency shutdown of iSM server. This message is output in the iSM server abort processing when iSMsvr stop -e is executed or the system is shut down. This message is output on UNIX system. [Measures] Unnecessary iSM01005: Command is entered.command= [Classification] INFO [Explanation] It shows that a command is entered. This message is output on UNIX system. aaa...
Chapter 2 Message List iSM01010: Storage Manager has restarted [Classification] INFO [Explanation] It shows that the iSM server is restarted. For Windows, this message is target of ESMPRO Manager Report. [Measures] Unnecessary iSM01011: has restarted [Classification] INFO [Explanation] It shows that a process indicated with aaa...a is restarted. For Windows, this message is target of ESMPRO Manager Report. aaa...
Chapter 2 Message List iSM01101: The function is not available. function= [Classification] WARNING [Explanation] The function indicated with aaa...a has become unavailable. iSM server will block the function. aaa...
Chapter 2 Message List iSM01103: Socket access failed. process= func= [errno=|error=] detail= [Classification] NOTICE [Explanation] Error has occurred in the socket communication between the processes indicated with aaa...a and the main process. This error occurs when the process has stopped or the file environment of iSM Server’s socket path (/opt/iSMsvr/etc/sock) is in an incorrect status. aaa...a : Process name bbb...
Chapter 2 Message List iSM01105: File access failed. file= func= errno= detail= [Classification] NOTICE [Explanation] It shows that an error has occurred in accessing the file indicated with aaa...a. In this message case, the environment of environment definition file (/etc/iSMsvr/iSMsvr.conf) or control file (files under /opt/iSMsvr/etc.) may be in an incorrect status. aaa...a : File path name bbb...
Chapter 2 Message List iSM01107: process has terminated abnormally [Classification] WARNING [Explanation] It shows that the process indicated with aaa...a has been abnormally terminated. A message of the cause has been reported from the abnormally terminated process right before this message. For Windows, this message is target of ESMPRO Manager Report. aaa...
Chapter 2 Message List iSM01110: Illegal configuration. file= line= [section=] [keyword=] [value=] [token=] [detail=] [Classification] NOTICE [Explanation] It shows that an illegal configuration is detected in the environment definition file. iSM Server will be abnormally terminated. aaa...a : Environment definition file name bbb...b : Line number with illegal configuration ccc...
Chapter 2 Message List iSM01111: User definition does not exist, Client cannot be connected. file= [Classification] NOTICE [Explanation] It shows that there is no specification of the indispensable parameter of the environment definition file. The indispensable parameter is a login parameter in the client section. aaa...a [Measures] : Environment definition file name Specify the login parameter of the client section in the environment definition file and restart the iSM server.
Chapter 2 Message List iSM01230: Storage Manager has terminated abnormally [Classification] WARNING [Explanation] It shows that iSM server has terminated abnormally. The message of the cause has displayed before this message. For Windows, this message is target of ESMPRO Manager Report. [Measures] Examine the cause through the previous message output before this message and restart the iSM server if necessary. iSM01232: Storage Manager has terminated abnormally by signal.
Chapter 2 Message List iSM01401: Usage: iSMsvr start [Explanation] It indicates that description of iSMsvr start command is incorrect. A specifiable format is shown in the message. Execute the command in valid format. This message is output on UNIX system. [Measures] Check command format and retry. iSM01402: Usage: iSMsvr stop [-e] [Explanation] It indicates that description of iSMsvr stop command is incorrect. A specifiable format is shown in the message. Execute the command in valid format.
Chapter 2 Message List iSM01408: Rejected: System function error () [Explanation] It indicates that an error occurred in a system function indicated by “aaa...”. aaa...a : System function name bbb...b : Error description errno= zzzz : Error number socket close : Socket with iSM closed timeout : Time-out occurred in socket communication with the iSM. [Measures] Check error description and retry command execution.
Chapter 2 Message List iSM01411: Rejected: PerformanceMonitor is not available [Explanation] It indicates that the performance monitor function is not available. [Measures] Unnecessary iSM01412: Internal error. detail= [Explanation] It indicates that an internal error has occurred. aaaa [Measures] : Internal code Obtain information and restart the iSM. iSM01413: Usage: iSMsvr prf_update -t value [Explanation] It indicates that description of iSMsvr prf_update command is incorrect.
Chapter 2 Message List iSM02000 ∼ iSM02010: In initialization, port setting failed errno= [Classification] NOTICE [Explanation] It shows that port number setting has failed in the initializing process. aaaaa [Measures] : Error number Take the measures below.
Chapter 2 Message List iSM02020: Function Error has occurred name= code= errno= [Classification] NOTICE [Explanation] It shows that a function error has occurred. This message is output on UNIX system. [Measures] aaa...a : Function name bbbbb : Internal code ccccc : Error number Check the settings relevant to the applicable function.
Chapter 2 Message List iSM02040: iSM/Client connected user= client= ip= [Classification] INFO [Explanation] It shows that an iSM client is connected. [Measures] aaa...a : User name bbbbbbbb : iSM client name ccc...c : iSM client’s IP address Unnecessary (This message indicates that the operation is completed as required.) iSM02041: iSM/Client terminated user= client= ip=
Chapter 2 Message List iSM02042: iSM/Client disconnected user= client= ip= reason= [Classification] NOTICE [Explanation] It shows that the iSM client has been disconnected. aaa...a : User name bbbbbbbb : iSM client name ccc...c : iSM client’s IP address ddd : Reason of the disconnection 001 : Hindrance generated in the client 002 : Time out generated in the client 003 : Others [Measures] Connect the client again if necessary.
Chapter 2 Message List iSM02050: iSM/Client Management Service started [Classification] INFO [Explanation] It shows that iSM/Client Management Service has started. [Measures] Unnecessary (This message indicates that the operation is completed as required.) iSM02051: iSM/Client Management Service terminated [Classification] INFO [Explanation] It shows that iSM/Client Management Service has terminated. [Measures] Unnecessary (This message indicates that the operation is completed as required.
Chapter 2 Message List iSM02053: iSM/Client Management Service is waiting for L3 user’s termination [Classification] INFO [Explanation] It shows that iSM/Client Management Service is waiting for the termination of L3 user. This message is output on UNIX system. [Measures] iSM server has become the state of waiting for the disconnection of L3 user who is in the controlling level. To terminate the iSM server, the disconnection from the L3 user client is necessary.
Chapter 2 Message List iSM02061: Data lost recovered client= ip= [Classification] NOTICE [Explanation] It shows that the received and transmitted data lost during process has been recovered. This message is output on UNIX system. [Measures] aaaaaaaa : iSM client name bbb...b : iSM client’s IP address (Output only to syslog) Check if the data loss has an influence on operation or not.
Chapter 2 Message List iSM03000 ∼ iSM03100: Disk Array is not specified in the config file. detail= [Classification] [Explanation] WARNING It indicates that no monitoring disk array exists for the iSM server because disk array has not been specified. aa-bbbb : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check description of agent section (disk array or auto_find_spf) in the environment definition file.
Chapter 2 Message List iSM03102: Diskarray[] and diskarray[] are the same disk. detail= [Classification] ERROR [Explanation] It indicates that disk arrays specified by diskarray [a] and diskarray [b] overlap with each other. The iSM server terminates abnormally.
Chapter 2 Message List iSM03104: IP address () in diskarray[] is not control path to the management object. detail= [Classification] ERROR [Explanation] It indicates that IP address specified by diskarray [b] is not a control path of the monitoring target disk array. The iSM server terminates abnormally. aaa...
Chapter 2 Message List iSM03106: IP address () in diskarray[] is same as one in diskarray[]. detail= [Classification] ERROR [Explanation] The same IP address is specified in diskarray [b] and diskarray [c]. The iSM server terminates abnormally. aaa...
Chapter 2 Message List iSM03108: File () in diskarray[] is invalid description. detail= [Classification] ERROR [Explanation] A special file specified by diskarray [b] is incorrect. The file may not exist or the file may not be a character-type special file. The iSM server terminates abnormally. This message is output on UNIX system. aaa...
Chapter 2 Message List iSM03109: File () in diskarray[] is not control path to the management object. detail= [Classification] ERROR [Explanation] A special file specified by diskarray [b] is not a control path for the monitoring target disk array. The iSM server terminates abnormally. This message is output on UNIX system. aaa...
Chapter 2 Message List iSM03110: File () in diskarray[] is defined in the other specification. detail= [Classification] ERROR [Explanation] It indicates that disk arrays specified by diskarray [b] overlap with each other. The iSM server terminates abnormally. This message is output on UNIX system. aaa...
Chapter 2 Message List iSM03111: File () in diskarray[] is same as one in diskarray[]. detail= [Classification] ERROR [Explanation] The same special file is specified in diskarray [b] and diskarray [c]. The iSM server terminates abnormally. This message is output on UNIX system. aaa...
Chapter 2 Message List iSM03112: File () in diskarray[] contradicts the other specification. detail= [Classification] ERROR [Explanation] The special files specified in diskarray [b] indicates different disk arrays. The iSM server terminates abnormally. This message is output on UNIX system. aaa...
Chapter 2 Message List iSM03113: All control paths of diskarray[] are not available. detail= [Classification] WARNING [Explanation] All control paths of diskarray [a] have been blocked. Monitoring to the disk array is disabled. a : Disk array specifying number in environment definition file (UNIX system: 1 to 64, Windows system: 1 to 32) bb-cccc : Detail information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM03120: Management of diskarray[] succeeded. name=() detail= [Classification] INFO [Explanation] Succeeded in incorporating disk array specified by agent section (diskarray [a]) in environment definition file. On Windows system, the message indicates that the disk array specified by environment setting (setting of disk array information) diskarray [a] was successfully incorporated.
Chapter 2 Message List iSM03122: Management of diskarray succeeded by autofind. name=() detail= [Classification] INFO [Explanation] It shows that management of disk array is successful via automatic detection function. aaa...a : Disk array name bb-cccc : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Unnecessary iSM03130: Management of control path in diskarray[] failed.ip= port= func=
Chapter 2 Message List iSM03131: Management of control path in diskarray[] failed. ip= port= func= reason=(timeout sec.) detail= [Classification] NOTICE [Explanation] Failed in the inclusion of the control path due to time out. a : Disk array specifying number in environment definition file (UNIX system: 1 to 64, Windows system: 1 to 32) bbb...b : IP address ccccc : Port number ddd...
Chapter 2 Message List iSM03133: Management of control path in diskarray[] failed. ip= port= reason=(invalid receive data) detail= [Classification] NOTICE [Explanation] Failed in the inclusion of the control path. a : Disk array specifying number in environment definition file (UNIX system: 1 to 64, Windows system: 1 to 32) bbb...b : IP address ccccc : Port number dd-eeee : Detail information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM03140: Management of control path in diskarray[] failed. file= func= errno= detail= [Classification] NOTICE [Explanation] Failed in the inclusion of the control path. This message is output on UNIX system. a : Disk array specification number (1 to 64) in the environment definition file (agent section) bbb...b : Special file name ccc...
Chapter 2 Message List iSM03141: Management of control path in diskarray[] failed. file= command=() status= (- ///) detail= [Classification] NOTICE [Explanation] Failed in the inclusion of the control path. This message is output on UNIX system. a : Disk array specification number (1 to 64) in the environment definition file (agent section) bbb...b : Special file name ccc...
Chapter 2 Message List iSM03142: Management of control path in diskarray[] failed.file= command=() status=() detail= [Classification] NOTICE [Explanation] Failed in the inclusion of the control path. This message is output on UNIX system. a : Disk array specification number (1 to 64) in the environment definition file (agent section) bbb...b : Special file name ccc...
Chapter 2 Message List iSM03150: Management of control path by autofind failed. file= func= errno= detail= [Classification] INFO [Explanation] Failed in the inclusion of the control path by auto find function. The disk with error cannot be included to iSM server. iSM server will ignore error. This message is output on UNIX system. aaa...a : Special file name bbb...
Chapter 2 Message List iSM03151: Management of control path by autofind failed. file= command=() status=(/- //) detail= [Classification] INFO [Explanation] Failed in the inclusion of the control path by auto find function. The disk with error cannot be included in iSM server. iSM server will ignore the error. This message is output on UNIX system. aaa...a : Special file name bbb...
Chapter 2 Message List iSM03152: Management of control path by autofind failed. file= command=() status=() detail= [Classification] INFO [Explanation] Failed in the inclusion of the control path by auto find function. The disk information that becomes an error cannot be included in iSM server. iSM server will ignore the error. This message is output on UNIX system. aaa...a : Special file name bbb...
Chapter 2 Message List iSM03200: Control path access failed. ip= port= func= errno= detail= [Classification] ERROR [Explanation] An error occurred in the socket communication with the disk array. aaa...a : IP address bbbbb : Port number ccc...c : Function number ddd : Error number ee-ffff : Detail information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM03203: Control path access failed. ip= port= func= reason=(timeout sec.) detail= [Classification] ERROR [Explanation] A timeout occurred in the socket communication with the disk array. aaa...a : IP address bbbbb : Port number ccc...c : Function number ddd : Seconds of time out ee-ffff : Detail information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM03220: Control path access failed. file= func= errno= detail= [Classification] ERROR [Explanation] Error occurred in the access of the control path (special file). This message is output on UNIX system. aaa...a : Special file name bbb...b : Function number ccc : Error number dd-eeee : Detail information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM03221: Control path access failed. file= command=() status=(/- //) detail= [Classification] ERROR [Explanation] A command error occurred. A failure may exist in the disk array. This message is output on UNIX system. aaa...a : Special file name bbb...
Chapter 2 Message List iSM03222: Control path access failed. file= command=() status=() detail= [Classification] ERROR [Explanation] A command error occurred. A failure may exist in the disk array. This message is output on UNIX system. aaa...a : Special file name bbb...b : Command Descriptor Block of the issued command cccccccc : Status Byte dd-eeee : Detail information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM03224: Control path is blockaded. file=() func= errno= status= ( productID= SN=) [UC= FC=][_ALERT_] [Classification] ERROR [Explanation] The control path (access to special file) was blockaded. This message is output on UNIX system. This message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. aaa...a : Special file name bbb...
Chapter 2 Message List iSM03224: Control path is blockaded. disk=(disk (Port Bus Target Lun)) func= errno= status= ( productID= SN=) [UC= FC=][_ALERT_] [Classification] ERROR [Explanation] The control path (access to disk) was blockaded. This message is output on Windows system. This message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO.
Chapter 2 Message List iSM03224: Control path is blockaded. ip=() func= errno= status= ( productID= SN=) [UC= FC=][_ALERT_] [Classification] ERROR [Explanation] The control path (access to SVP) was blockaded. This message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. aaa...a : IP address bbb...b : Function number ccccc : Error number ddddd : Result of issuing of SCSI command eee..
Chapter 2 Message List iSM03225: Data can not be gotten sequentially during split mode.Disk=(disk (Port Bus Target Lun)) reason=(invalid sequence) detail= [Classification] ERROR [Explanation] Obtaining data failed in command divided transfer. The message indicates that retry processing could not obtain correct data either.
Chapter 2 Message List iSM03301: SVP failed. name=() ip= detail= [Classification] INFO [Explanation] Service processor(SVP) has become unavailable for use due to a problem. If SVP is in redundant composition, iSM server will continue processing by switching the SVP. aaa...a : Disk array name bbb...b : IP address of service processor (SVP) cc-dddd : Detail information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM03303: SNMP trap has been available. detail= [Classification] INFO [Explanation] SNMP TRAP has changed the receiving status from unavailable to available. SNMP TRAP receiving can be done. iSM server has become available to swiftly report trouble information using SNMP TRAP. aa-bbbb : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Unnecessary iSM03400: File access failed. func= path=
Chapter 2 Message List iSM03410: Socket access failed. func= errno= detail= [Classification] ERROR [Explanation] Error occurred in the socket access function. iSM server will be terminated abnormally. aaa...a : Function number bbb : Error number cc-dddd : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Check the function name and error number, and resolve the hindrance. Restart the iSM server if necessary.
Chapter 2 Message List iSM03420: Memory access failed. func= errno= detail= [Classification] ERROR [Explanation] Error occurred in the memory access function. iSM server will be terminated abnormally. This message is output on UNIX system. aaa...a : Function number bbb : Error number cc-dddd : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Check the function name and error number, and resolve the hindrance.
Chapter 2 Message List iSM03440: iSMmknod is running. detail= [Classification] ERROR [Explanation] iSM server cannot be activated because iSMmknod command is being executed. This message is output on UNIX system. aa-bbbb : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Wait for completion of iSMmknod command and restart the iSM server. iSM03441: iSMmknod is not yet executed.
Chapter 2 Message List iSM03500: Internal error occurred. detail= [Classification] ERROR [Explanation] Internal error has occurred under the agent management. The iSM server terminates abnormally. aa-bbbb : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Save the following information and restart the iSM server. iSM operation log syslog (for Unix) event log (for Windows) iSM03900: Process is busy when it terminates emergency.
Chapter 2 Message List iSM04000 ∼ iSM04020: Function Error has occurred name= code= errno= [Classification] NOTICE [Explanation] It shows that a function error has occurred. [Measures] aaa...a : Function name bbbbb : Internal code ccccc : Error number Check the settings relevant to the applicable function. iSM04021: Internal Error has occurred code= errno= [Classification] NOTICE [Explanation] It shows that an internal error has occurred.
Chapter 2 Message List iSM04023: File write error has occurred file= [Classification] ERROR [Explanation] Failed in writing to the file. aaa...a [Measures] : File name Check the status of applicable file. (Writing down authority, etc.) If a generation management file (iSM_Log.cnt) name is indicated, the generation number managed by the generation management file is invalid, and backup operation for the generation file may not be performed normally.
Chapter 2 Message List iSM04025: File open error has occurred file= [Classification] ERROR [Explanation] Failed in opening the file. aaa...a [Measures] : File name Check the existence and the status of the applicable file. If a generation management file (iSM_Log.cnt) name is indicated, the generation number managed by the generation management file is invalid, and backup operation for the generation file may not be performed normally.
Chapter 2 Message List iSM04060: Log File write started host= [Classification] INFO [Explanation] It shows that writing into the operation log has started. aaa...
Chapter 2 Message List iSM06000 ∼ iSM06020: Function Error has occurred name= code= errno= [Classification] NOTICE [Explanation] It shows that a function error has occurred. aaa...a [Measures] : Function name bbbbb : Internal code ccccc : Error number Check the settings relevant to the applicable function. iSM06021: Internal Error has occurred code= errno= [Classification] NOTICE [Explanation] It shows that an internal error has occurred.
Chapter 2 Message List iSM06030: Message driven definition file cannot open. errno= file= [Classification] WARNING [Explanation] It shows that opening of the message driven definition file has failed. [Measures] aaaaa : Error number bbb...b : File name Check the status of definition file. The definition files are stored in the following: For UNIX : /etc/iSMsvr/msgdrv.conf For Windows: installation directory\conf\iSMsvr\msgdrv.
Chapter 2 Message List iSM06033: Message driven definition file error. overlaps. line= [Classification] WARNING [Explanation] It indicates that “SMTP”, “SMTP_PORT”, “POP”, “POP_PORT”, “AUTH”, “USER”, “PASSWORD”, or “HEADER” overlaps in the message driven definition file. aaa...a : “SMTP”, “SMTP_PORT”, “POP”, “POP_PORT”, “AUTH”, “USER”, “PASSWORD”, or “HEADER” bbb [Measures] : Error line number Take the measures below.
Chapter 2 Message List iSM06035: Message driven definition file error. ‘=’ does not exist. line= [Classification] WARNING [Explanation] It indicates that there is no “=” in the applicable line of the message driven definition file. aaa : Error line number [Measures] Take the measures below. For UNIX : Check the syntax of the definition file and describe it correctly. For Windows: Check the link information in the environment setting, and specify the setting again.
Chapter 2 Message List iSM06037: Message driven definition file error. is not defined [Classification] WARNING [Explanation] It indicates that there is no definition of “SMTP”, “POP”, or “USER” in the message driven definition file. aaa...a [Measures] : “SMTP”, “POP”, or “USER” Take the measures below. For UNIX : Check the syntax of the definition file and describe SMTP, POP, or USER definition correctly.
Chapter 2 Message List iSM06039: Message driven definition file error. “shell” and “mail” exceeded 10. line= [Classification] WARNING [Explanation] It indicates that definition number of either “shell” or “mail” at the same level exceeded 10 in the applicable line of the message driven definition file. aaa [Measures] : Error line number Take the measures below. For UNIX : Check the applicable line of the definition file and reduce the description number of definition.
Chapter 2 Message List iSM06041: Header file cannot read. errno= [Classification] WARNING [Explanation] It indicates that reading a header file has failed. aaaaa [Measures] : Error number Check header file name (header file name specified in message driven definition file on UNIX system, or mail header file name specified in link information of environment settings on Windows system), and check the state of the file (such as reading authority, etc.).
Chapter 2 Message List iSM06044: Header file error. No character following “FROM:” [Classification] WARNING [Explanation] It indicates that nothing is written next to first “FROM:” in the header file. [Measures] Check header file name (header file name specified in message driven definition file on UNIX system, or mail header file name specified in link information of environment settings on Windows system), and check the first line of the file. iSM06045: Header file error. Line exceeds 256 bytes.
Chapter 2 Message List iSM06048: POP address or port number error [Classification] WARNING [Explanation] It indicates that the specified POP address or the port number specified in POP_PORT is incorrect. [Measures] Specify POP by the DNS name of IP address of the POP server and POP_PORT by the port number of the POP server. iSM06050: Shell file does not exist. file= [Classification] WARNING [Explanation] It indicates that shell file does not exist. aaa...
Chapter 2 Message List iSM06062: Mail server connect error. name= code= errno= [Classification] WARNING [Explanation] It indicates that the connection to mail server has failed. [Measures] aaa...a : Function name bbbbb : Internal code ccccc : Error number Failed in connection with mail server (mail server specified in message driven definition file on UNIX system, or mail server specified by link information of environment settings on Windows system).
Chapter 2 Message List iSM06064: Send error (to mail server). name= code= errno= [Classification] WARNING [Explanation] It indicates that transmitting to mail server has failed. [Measures] aaa...a : Function name bbbbb : Internal code ccccc : Error number Check the operation of the defined mail server, and resolve the problem. iSM06065: Communication error(mail server). id= send= recv=
Chapter 2 Message List iSM06068: Authentication failed. id= send= recv= [Classification] WARNING [Explanation] It indicates that authentication has failed. [Measures] a : Internal code bbb...b : Transmission information ccc...c : Reception information Take the measures described below. For UNIX : Check the required information for the specified authentication mode, and describe it correctly.
Chapter 2 Message List iSM06071: Data lost recovered [Classification] WARNING [Explanation] It indicates that the message lost by the overflow of message buffer has been recovered. This message is output on UNIX system. [Measures] (Output only to syslog) This message is output in pair with iSM06070, which indicates that too many messages to be linked exist, and indicates recovery of the error indicated by iSM06070. Refer to iSM06070 for the recovery processing.
Chapter 2 Message List iSM06082: Definition change error. Message driven function continues to operate by previous definition [Classification] WARNING [Explanation] The definition change was failed. The driven function operates by the old function before changing. [Measures] While trying to change the definition with iSM server operating, the definition error occurred. Correct the definition error and execute the change command again. iSM06083: Making directory for core dump file error.
Chapter 2 Message List iSM06085: Making directory for message file error. name= path= errno= [Classification] ERROR [Explanation] It indicates it failed to create the message file directory. [Measures] aaa...a : Function name bbb...b : Directory name ccccc : Error number There is an error in the authority of installation directory and so on. iSM06086: Mail process count over. This message is canceled. msg=
Chapter 2 Message List iSM06088: Message driven processing stopped for excess of number of processes was resumed [Classification] WARNING [Explanation] The driving process, which has been cancelled because the processing number of mail transmission and shell start per one minute exceeded the limit, has been released. [Measures] Take the measures according to messages of iSM06086 and iSM06087 that appear at the same time. iSM06091: Message driven definition file error. Syntax error existed.
Chapter 2 Message List iSM06092: Message driven definition file error. Number of “,” is not right. line= [Classification] WARNING [Explanation] It indicates that “ , ” is not suitable in the applicable line of the message driven definition file. aaa [Measures] : Error line number Take the measures below. For UNIX : Check the applicable line of the message driven definition file and correct the definition.
Chapter 2 Message List iSM06099: Message driven definition file error. id= line= [Classification] WARNING [Explanation] It indicates that incorrect description exists in the message driven definition file. a : Error Classification 0 : Some character follows the [SERVER] or [LEVEL]. 1 : A position of “=” is inappropriate or “=” does not exist. 2 : No character follows “=”. 3 : Invalid character exists in the end of line. 4 : A position of “ ) ” is inappropriate.
Chapter 2 Message List iSM06902: Message customize function error. reason= [func=] [errno=] [line=] [detail=] [Classification] ERROR [Explanation] It shows that an error occurred in the message customizing function. This message is output on Windows system. aaa...a : error contents system call error : System call error file definition error : File description error internal error : Internal error bbb...
Chapter 2 Message List iSM07000 ∼ iSM07011: Resource monitoring started. ( productID= SN=) [Classification] INFO [Explanation] It indicates that state monitoring to disk array (name: aaa...a) has been started. For Windows, this message is target of ESMPRO Manager Report. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array Unnecessary iSM07012: Resource monitoring started. (
Chapter 2 Message List iSM07021: Resource monitoring stopped. ( productID= SN=) [Classification] INFO [Explanation] It indicates that state monitoring to disk array (name: aaa...a) has been stopped. For Windows, this message is target of ESMPRO Manager Report. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array Unnecessary iSM07022: Resource monitoring stopped for maintenance. (
Chapter 2 Message List iSM07023: Resource monitoring stopped by control path fault. ( productID= SN=) [UC= FC=][_ALERT_] [Classification] ERROR [Explanation] It indicates that trouble of control path caused the stop of monitoring to disk array (name: aaa...a). For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07024: Resource monitoring stopped by information collecting failure. ( productID= SN=) [UC= FC=][_ALERT_] [Classification] ERROR [Explanation] It indicates that state monitoring to disk array (name: aaa...a) has been stopped by information collecting failure. For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. aaa...
Chapter 2 Message List iSM07026: Resource monitoring changes to recovery mode.( productID= SN=) [UC= FC=][_ALERT_] [Classification] ERROR [Explanation] It indicates that the monitoring for the disk array (name: aaa...a) became impossible to continue due to disk array failure or control path failure, and the system is turned into the monitoring recovery waiting status.
Chapter 2 Message List iSM07032: Request to stop monitoring resource is waiting for termination of other request. () [Classification] INFO [Explanation] It indicates that a state monitoring stop command to disk array (name: aaa...a) is waiting for the end of other command processing. The monitoring of disk array automatically stops after the end of the processing that has been requested. aaa...
Chapter 2 Message List iSM07035: Retrying to start monitoring resource is started. () [Classification] INFO [Explanation] It indicates that an attempt has been made to restart state monitoring to disk array (name: aaa...a) that stopped operation due to failure. aaa...a [Measures] : Disk array name Unnecessary iSM07091: Control path access to failed.
Chapter 2 Message List iSM07093: Monitoring function is blockaded. [Classification] ERROR [Explanation] It indicates that state monitoring to the iSM server is blockaded. [Measures] Collect information and restart the iSM server if necessary. For how to collect the information, refer to “Information Gathering Method when Server Fault with Unknown Cause” of the “User’s Manual”. iSM07094: Illegal data has detected. (
Chapter 2 Message List iSM07095: Inconsistency of resources information() was detected. ( productID= SN=) [Classification] ERROR [Explanation] It indicates that inconsistency of configuration information is detected in resource (aaaaa) of disk array (name: bbb...b). [Measures] aaaaa : Resource type (LD, etc.) bbb...b : Disk array name ccccc : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07101: State of PD(h) has become ready. ( productID= SN= No=h-h ) [Classification] INFO [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) has become ready. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S4300 Disk Array etc.) ddd...d : Serial number of disk array ee-ff : Physical disk number ggg...
Chapter 2 Message List iSM07102: State of PD(h) has become fault. ( productID= SN= No=h-h )[_ALERT_] [Classification] ERROR [Explanation] It indicates that trouble occurred in the physical disk (number: ee-ff) of disk array (name: bbb...b). For Windows, this message is target of ESMPRO Manager Report. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S4300 Disk Array etc.) ddd...
Chapter 2 Message List iSM07104: State of PD(h) has become attn(rebuilding). ( productID= SN= No=h-h )[_ALERT_] [Classification] NOTICE [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) is rebuilding data. For Windows, this message is target of ESMPRO Manager Report. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S4300 Disk Array etc.) ddd.
Chapter 2 Message List iSM07105: State of PD(h) has become attn(powering up). ( productID= SN= No=h-h ) [Classification] NOTICE [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) is starting up. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S4300 Disk Array etc.) ddd...d : Serial number of disk array ee-ff : Physical disk number ggg...
Chapter 2 Message List iSM07106: State of PD(h) has become attn(formatting). ( productID= SN= No=h-h ) [Classification] NOTICE [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) is being formatted. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S4300 Disk Array etc.) ddd...d : Serial number of disk array ee-ff : Physical disk number ggg.
Chapter 2 Message List iSM07108: State of PD(h) has become offline. ( productID= SN= No=h-h ) [Classification] ERROR [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) has been in the off line status. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S4300 Disk Array etc.) ddd...
Chapter 2 Message List iSM07109: State of PD(h) has become ready. ( productID= SN= No=h-h )[_ALERT_] [Classification] INFO [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) has rebuilt data and its status has changed to “ready”. For Windows, this message is target of ESMPRO Manager Report. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...
Chapter 2 Message List iSM07111: State of (h[-h]) has become ready. ( productID= SN= No=h ) [Classification] INFO [Explanation] It indicates that the component* (abbreviated name: aaaaa, number: gg) of disk array (name: ddd...d) has become ready. aaaaa : Abbreviated name of component bb-cc : Internal number indicating component type ddd...d : Disk array name eeeee : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07113: State of (h[-h]) has become offline. ( productID= SN= No=h ) [Classification] ERROR [Explanation] It indicates that the component* (abbreviated name: aaaaa, number: gg) of disk array (name: ddd...d) has become removed (or not existed). aaaaa : Abbreviated name of component bb-cc : Internal number indicating component type ddd...d : Disk array name eeeee : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07115: State of CHE(h[-h]) has become attn(rebuilding). ( productID= SN= No=h ) [Classification] NOTICE [Explanation] It indicates that the cache module (number: ff) of a disk array (name: ccc...c) is rebuilding data. [Measures] aa-bb : Internal number indicating component type ccc...c : Disk array name ddd...d : Product ID of disk array (S2800 Disk Array etc.) eee...
Chapter 2 Message List iSM07121: State of LD has become ready. ( productID= SN= No=h Name=) [Classification] INFO [Explanation] It indicates that the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) has become ready. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dddd : Logical disk number eee...
Chapter 2 Message List iSM07123: State of LD has become fault(media error). ( productID= SN= No=h Name= [PDN=h-h])) [_ALERT_] [Classification] ERROR [Explanation] It indicates that trouble (media error) occurred in the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a). For Windows, this message is target of ESMPRO Manager Report. aaa...a : Disk array name bbb...b : Product ID of disk array (S2100 Disk Array etc.) ccc...
Chapter 2 Message List iSM07124: State of LD has become attn(reduce). ( productID= SN= No=h Name=) [Classification] ERROR [Explanation] It indicates that the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) has become a reduced state*. * RAID composition which lost redundancy by PD trouble. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07126: State of LD has become attn(preventive copy). ( productID= SN= No=h Name=) [Classification] NOTICE [Explanation] It indicates that data in the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) has been copied into spare disk. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dddd : Logical disk number eee...
Chapter 2 Message List iSM07128: State of LD has become attn(unformatted). ( productID= SN= No=h Name=) [Classification] NOTICE [Explanation] It indicates that the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) has been unformatted logically. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dddd : Logical disk number eee...
Chapter 2 Message List iSM07130: State of LD has become attn(format-fail). ( productID= SN= No=h Name=) [Classification] NOTICE [Explanation] It indicates that the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) failed in formatting logically. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dddd : Logical disk number eee...
Chapter 2 Message List iSM07132: State of LD has become attn(expand-fail). ( productID= SN= No=h Name=) [Classification] NOTICE [Explanation] It indicates that the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) failed in logical expansion. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dddd : Logical disk number eee...
Chapter 2 Message List iSM07141: State of RANK has become ready. ( productID= SN= No=- h-h ) [Classification] INFO [Explanation] It indicates that the RANK (number: dd-ee) of disk array (name: aaa...a) has become ready. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dd-ee : RANK number Unnecessary iSM07142: State of RANK has become fault. (
Chapter 2 Message List iSM07143: State of RANK has become attn(reduce). ( productID= SN= No=- h-h ) [Classification] ERROR [Explanation] It indicates that the RANK (number: dd-ee) of disk array (name: aaa...a) has become in reduced state. * RAID composition which lost redundancy by PD trouble. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07145: State of RANK has become attn(preventive copy). ( productID= SN= No=- h-h ) [Classification] NOTICE [Explanation] It indicates that data in the RANK (number: dd-ee) of disk array (name: aaa...a) has been copied into spare disk. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07147: State of RANK has become attn(expanding). ( productID= SN= No=- h-h ) [Classification] NOTICE [Explanation] It indicates that the rank (number: dd-ee) of disk array (name: aaa...a) is expanding the logic. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dd-ee : RANK number Unnecessary iSM07148: State of RANK has become attn(expand-fail). (
Chapter 2 Message List iSM07151: State of PD(h) has become ready. ( productID= SN= No=h-h ) [Classification] INFO [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) has become ready. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S2800 Disk Array etc.) ddd...d : Serial number of disk array ee-ff : Physical disk number ggg...
Chapter 2 Message List iSM07152: State of PD(h) has become fault. ( productID= SN= No=h-h ) [UC= FC=] [_ALERT_] [Classification] ERROR [Explanation] It indicates that a trouble occurred in the physical disk (number: ee-ff) of disk array (name: bbb...b). For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. aa : Internal number indicating physical disk type bbb...
Chapter 2 Message List iSM07154: State of PD(h) has become attn(rebuilding). ( productID= SN= No=h-h ) [UC= FC=] [_ALERT_] [Classification] NOTICE [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) is rebuilding data. For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. aa : Internal number indicating physical disk type bbb...
Chapter 2 Message List iSM07155: State of PD(h) has become attn(powering up). ( productID= SN= No=h-h ) [Classification] NOTICE [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) is activated. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S2800 Disk Array etc.) ddd...d : Serial number of disk array ee-ff : Physical disk number ggg...
Chapter 2 Message List iSM07156: State of PD(h) has become attn(formatting). ( productID= SN= No=h-h ) [Classification] NOTICE [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) is being formatted. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S2800 Disk Array etc.) ddd...d : Serial number of disk array ee-ff : Physical disk number ggg.
Chapter 2 Message List iSM07158: State of PD(h) has become offline. ( productID= SN= No=h-h ) [Classification] ERROR [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) has been in the off line status. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S2800 Disk Array etc.) ddd...
Chapter 2 Message List iSM07159: State of PD(h) has become ready. ( productID= SN= No=h-h ) [UC= FC=] [_ALERT_] [Classification] INFO [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) has rebuilt data and its status has changed to “ready”. For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO.
Chapter 2 Message List iSM07161: State of (h[-h]) has become ready. ( productID= SN= No=h) [Classification] INFO [Explanation] It indicates that the component* (abbreviated name: aaaaa, number: gg) of disk array (name: ddd...d) has become ready. aaaaa : Abbreviated name of component bb-cc : Internal number indicating component type ddd...d : Disk array name eeeee : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07162: State of (h[-h]) has become fault. ( productID= SN= No=h) [UC= FC=][_ALERT_] [Classification] ERROR [Explanation] It indicates that trouble occurred in the component* (abbreviated name: aaaaa, number: gg) of disk array (name: ddd...d). For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO.
Chapter 2 Message List iSM07163: State of (h[-h]) has become offline. ( productID= SN= No=h) [Classification] ERROR [Explanation] It indicates that the component* (abbreviated name: aaaaa, number: gg) of disk array (name: ddd...d) has become removed (or not existed). aaaaa : Abbreviated name of component bb-cc : Internal number indicating component type ddd...d : Disk array name eeeee : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07165: State of CHE(h[-h]) has become attn(rebuilding). ( productID= SN= No=h ) [Classification] NOTICE [Explanation] It indicates that cache module (number: ff) of a disk array (name: ccc...c) is rebuilding data. [Measures] aa-bb : Internal number indicating component type ccc...c : Disk array name ddd...d : Product ID of disk array (S2800 Disk Array etc.) eee...
Chapter 2 Message List iSM07171: State of LD has become ready. ( productID= SN= No=h Name=) [Classification] INFO [Explanation] It indicates that the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) has become ready. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dddd : Logical disk number eee...
Chapter 2 Message List iSM07173: State of LD has become fault(media error). ( productID= SN= No=h Name= [PDN=h-h]) [UC= FC=][_ALERT_] [Classification] ERROR [Explanation] It indicates that trouble (media error) occurred in the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a). For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. aaa...
Chapter 2 Message List iSM07174: State of LD has become attn(reduce). ( productID= SN= No=h Name=) [Classification] ERROR [Explanation] It indicates that the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) has become a reduced state*. * RAID composition which lost redundancy by PD trouble. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07176: State of LD has become attn(preventive copy). ( productID= SN= No=h Name=) [Classification] NOTICE [Explanation] It indicates that data in the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) has been copied into spare disk. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dddd : Logical disk number eee...
Chapter 2 Message List iSM07178: State of LD has become attn(unformatted). ( productID= SN= No=h Name=) [Classification] NOTICE [Explanation] It indicates that the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) has been unformatted logically. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dddd : Logical disk number eee...
Chapter 2 Message List iSM07180: State of LD has become attn(format-fail). ( productID= SN= No=h Name=) [Classification] NOTICE [Explanation] It indicates that the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) failed in formatting logically. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dddd : Logical disk number eee...
Chapter 2 Message List iSM07182: State of LD has become attn(expand-fail). ( productID= SN= No=h Name=) [Classification] NOTICE [Explanation] It indicates that the logical disk (number: dddd, name: eee...e) of disk array (name: aaa...a) failed in logical expansion. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dddd : Logical disk number eee...
Chapter 2 Message List iSM07191: State of RANK has become ready. ( productID= SN= No=- h-h) [Classification] INFO [Explanation] It indicates that the RANK (number: dd-ee) of disk array (name: aaa...a) has become ready. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dd-ee : RANK number Unnecessary iSM07192: State of RANK has become fault. (
Chapter 2 Message List iSM07193: State of RANK has become attn(reduce). ( productID= SN= No=- h-h) [Classification] ERROR [Explanation] It indicates that the RANK (number: dd-ee) of disk array (name: aaa...a) has become in reduced state. * RAID composition which lost redundancy by PD trouble. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07195: State of RANK has become attn (preventive copy). ( productID= SN= No=- h-h) [Classification] NOTICE [Explanation] It indicates that data in the RANK (number: dd-ee) of disk array (name: aaa...a) has been copied into spare disk. This message is output on UNIX system. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.
Chapter 2 Message List iSM07197: State of RANK has become attn(expanding). ( productID= SN= No=- h-h) [Classification] [Explanation] NOTICE It indicates that the rank (number: dd-ee) of disk array (name: aaa...a) is expanding the logic. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dd-ee : RANK number Unnecessary iSM07198: State of RANK has become attn(expand-fail). (
Chapter 2 Message List iSM07201: Disk Array ,named “”, has renamed to “”. (SN=) [Classification] INFO [Explanation] It indicates that the name of disk array (name: aaa...a, serial number: ccccc) has been changed to bbb...b. [Measures] aaa...a : Disk array name bbb...b : New disk array name ccccc : Serial number Unnecessary iSM07202: PORT,named “”, has renamed to “”. (
Chapter 2 Message List iSM07203: LD ,named “”, has renamed to “”. (No=h) [Classification] INFO [Explanation] It indicates that the logical disk (number: dddd) name of disk array (name: ccc...c)has been changed from aaa...a to bbb...b. [Measures] aaa...a : Old Logical disk name bbb...b : New Logical disk name ccc...c : Disk array name dddd : Logical disk number Unnecessary iSM07204: Name setting has executed with SG file. (
Chapter 2 Message List iSM07206: CHE-Disk has configured.() [Classification] NOTICE [Explanation] It indicates that the cache disk configuration of disk array (name: aaa...a) has been changed. aaa...a [Measures] : Disk array name Unnecessary iSM07207: Attribute of PD has changed from to . ( No=- h-h) [Classification] NOTICE [Explanation] It indicates that partition (data, spare) in the physical disk (number: dd-ee) of disk array (name: ccc...
Chapter 2 Message List iSM07211: Renaming Disk Array,named “”,is failed. (SN=) [Classification] INFO [Explanation] It indicates that change of disk array names (name: aaa...a, serial number: bbbbb) failed. [Measures] aaa...a : Disk array name bbbbb : Serial number Check result indicated on client screen (dialog) and remove cause of the failure. Then change the names again. iSM07212: Renaming PORT of “” is failed.
Chapter 2 Message List iSM07220: SVP information was updated. ( productID= SN= No=- h) [Classification] INFO [Explanation] It indicates that service processor information (component number: dd) of disk array (name: aaa...a) has been changed. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array dd : Component number of service processor. Unnecessary iSM07221: Product information was changed.
Chapter 2 Message List iSM07251: Disk Array name “” exists in others. (productID= SN=) [Classification] WARNING [Explanation] It indicates that the disk array name (aaa...a) (product ID: bbbbb, serial number: ccccc) is duplicated. [Measures] aaa...a : Disk array name bbbbb : Product ID of disk array (S2100 Disk Array etc.) ccccc : Serial number of disk array Check the disk arrays with the same name, and correct the name. iSM07252: PORT name “” exists in others.
Chapter 2 Message List iSM07301: LD_SET,named “” was added. () [Classification] INFO [Explanation] It indicates that LD_SET (name: aaa...a) is added to disk array (name: bbb...b). [Measures] aaa...a : LD_SET name bbb...b : Disk array name Unnecessary iSM07302: LD_SET,named “” was deleted. () [Classification] [Explanation] INFO It indicates that LD_SET (name: aaa...a) is deleted from disk array (name: bbb...b). [Measures] aaa...a : LD_SET name bbb...
Chapter 2 Message List iSM07304: PATH, “” was deleted from LD_SET. ( LD_SET=) [Classification] [Explanation] INFO It indicates that the path (aaa...a) is deleted from LD_SET (name: ccc...c) of disk array (name: bbb...b). aaa...a : Path aaaa-aaaa-aaaa-aaaa : WWPN aah-aah [Measures] bbb...b : Disk array name ccc...c : LD_SET name : Port number Unnecessary iSM07305: Some of LDs were assigned to LD_SET. ( LD_SET= PATH=
Chapter 2 Message List iSM07307: PATH, “” was changed for “”. ( LD_SET=) [Classification] INFO [Explanation] It indicates that the path aaa...a to LD_SET (name: ddd...d) of disk array (name: ccc...c) is changed to bbb...b. aaa...a bbb...b : Old path aaaa-aaaa-aaaa-aaaa : WWPN aah-aah : Port number : New path bbbb-bbbb-bbbb-bbbb : WWPN bbh-bbh [Measures] ccc...c : Disk array name ddd...d : LD_SET name : Port number Unnecessary iSM07308: LD,named “
Chapter 2 Message List iSM07309: LD,named “”(h) was added to LD_SET. ( LD_SET=) [Classification] INFO [Explanation] It indicates that the logical disk (name: aaa...a, number: bbbb) is added to LD_SET (name: ddd...d) of disk array (name: ccc...c). aaa...a [Measures] : Logical disk name bbbb : Logical disk number ccc...c : Disk array name ddd...d : LD_SET name Unnecessary iSM07310: LD,named “”(h) was deleted from LD_SET. ( LD_SET=
Chapter 2 Message List iSM07311: LD,named “”(h) was deleted from LD_SET. ( LD_SET=) [Classification] INFO [Explanation] It indicates that the logical disk (name: aaa...a, number: bbbb) is deleted from LD_SET (name: ddd...d) of disk array (name: ccc...c). [Measures] aaa...a : Logical disk name bbbb : Logical disk number ccc...c : Disk array name ddd...d : LD_SET name Unnecessary iSM07312: ACCESS_CONTROL mode was changed into . (
Chapter 2 Message List iSM07314: ACCESS_CONTROL function was stopped. () [Classification] INFO [Explanation] It indicates that access control function on disk array (name: aaa...a) has been stopped. aaa...a [Measures] : Disk array name Unnecessary iSM07315: LD_SET, named “”, has renamed to “”. () [Classification] INFO [Explanation] It indicates that LD_SET name of disk array (name: ccc...c) has been changed from aaa...a to bbb...b. [Measures] aaa...
Chapter 2 Message List iSM07331: Adding a LD_SET, named “” was failed. () [Classification] INFO [Explanation] It indicates that adding the LD_SET (name: aaa...a) to disk array (name: bbb...b) failed. [Measures] aaa...a : LD_SET name bbb...b : Disk array name Identify a cause of fault on the basis of previous and following messages, remove the cause of fault, and then retry processing. iSM07332: Deleting a LD_SET, named “” was failed. (
Chapter 2 Message List iSM07334: Deleting a PATH, named “” to LD_SET was failed. ( LD_SET=) [Classification] INFO [Explanation] It indicates that deleting Path (aaa...a) from LD_SET (name: ccc...c) of disk array (name: bbb...b) failed. aaa...a : Path aaaa-aaaa-aaaa-aaaa : WWPN aah-aah [Measures] bbb...b : Disk array name ccc...
Chapter 2 Message List iSM07336: Assigning some of LDs, to LD_SET was failed. ( LD_SET=) [Classification] INFO [Explanation] It indicates that assigning Logical Disk to LD_SET (name: bbb...b) of disk array (name: aaa...a) failed. [Measures] aaa...a : Disk array name bbb...b : LD_SET name Identify a cause of fault on the basis of previous and following messages, remove the cause of fault, and then retry processing. iSM07337: Changing a PATH, from “” to “
Chapter 2 Message List iSM07338: Adding a LD, named “” (h), to LD_SET was failed. ( LD_SET= PATH=) [Classification] INFO [Explanation] It indicates that adding Logical Disk (name: aaa...a, number: bbbb) to LD_SET (name: ddd...d) of disk array (name: ccc...c) , Path (eee...e) failed. aaa...a : Logical disk name bbbb : Logical disk number ccc...c : Disk array name ddd...d : LD_SET name eee...
Chapter 2 Message List iSM07340: Deleting a LD, named “” (h), from LD_SET was failed. ( LD_SET= PATH=) [Classification] INFO [Explanation] It indicates that deleting Logical Disk (name: aaa...a) from LD_SET (name: ddd...d) of disk array (name: ccc...c), Path (eee...e) was failed. aaa...a : Logical disk name bbbb : Logical disk number ccc...c : Disk array name ddd...d : LD_SET name eee...
Chapter 2 Message List iSM07342: Changing ACCESS_CONTROL mode was failed. ( No=h-h) [Classification] INFO [Explanation] It indicates that changing Port (number: bb-cc) of disk array (name: aaa...a) failed. [Measures] aaa...a : Disk array name bb-cc : Port number Identify a cause of fault on the basis of previous and following messages, remove the cause of fault, and then retry processing. iSM07343: Starting ACCESS_CONTROL function was failed. (
Chapter 2 Message List iSM07345: Renaming LD_SET, named “” was failed. () [Classification] INFO [Explanation] It indicates that renaming the LD_SET (name: aaa...a) to disk array (name: bbb...b) failed. [Measures] aaa...a : LD_SET name bbb...b : Disk array name Identify a cause of fault on the basis of previous and following messages, remove the cause of fault, and then retry processing. iSM07346: Re-setup of Platform was failed. ( LD_SET=
Chapter 2 Message List iSM07402: State of PD(h) has become info(inactive). ( productID= SN= No=h-h )[_ALERT_] [Classification] INFO [Explanation] It indicates that trouble occurred in the physical disk (number: ee-ff) of disk array (name: bbb...b). For Windows, this message is target of ESMPRO Manager Report. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S4300 Disk Array etc.) ddd...
Chapter 2 Message List iSM07404: State of PD(h) has become attn(rebuilding). ( productID= SN= No=h-h ) [Classification] NOTICE [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) is rebuilding data. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S4300 Disk Array etc.) ddd...d : Serial number of disk array ee-ff : Physical disk number ggg.
Chapter 2 Message List iSM07409: State of PD(h) has become ready. ( productID= SN= No=h-h ) [Classification] INFO [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) has completed rebuilding and become ready. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S4300 Disk Array etc.) ddd...
Chapter 2 Message List iSM07411: State of POOL has become ready. ( productID= SN= No=h Name=) [Classification] INFO [Explanation] It indicates that the pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) has become ready. aaa...a : Disk array name bbb...b : Product ID of disk array (S2800 Disk Array etc.) ccc…c : Serial number of disk array dddd : Pool number eee...
Chapter 2 Message List iSM07413: State of POOL has become attn(reduce). ( productID= SN= No=h Name=) [Classification] ERROR [Explanation] It indicates that the pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) has become a reduced state. [Measures] aaa...a : Disk array name bbb...b : Product ID of disk array (S2800 Disk Array etc.) ccc...c : Serial number of disk array dddd : Pool number eee...
Chapter 2 Message List iSM07415: State of POOL has become attn(preventive copy). ( productID= SN= No=h Name=) [Classification] NOTICE [Explanation It indicates that data in a pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) has been copied into a spare disk. [Measures] aaa...a : Disk array name bbb...b : Product ID of disk array (S2800 Disk Array etc.) ccc…c : Serial number of disk array dddd : Pool number eee...
Chapter 2 Message List iSM07452: State of PD(h) has become info(inactive). ( productID= SN= No=h-h ) [UC= FC=][_ALERT_] [Classification] INFO [Explanation] It indicates that trouble occurred in the physical disk (number: ee-ff) of disk array (name: bbb...b). For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. aa : Internal number indicating physical disk type bbb...
Chapter 2 Message List iSM07454: State of PD(h) has become attn(rebuilding). ( productID= SN= No=h-h ) [UC= FC=] [Classification] NOTICE [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) is rebuilding data. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S2800 Disk Array etc.) ddd...
Chapter 2 Message List iSM07459: State of PD(h) has become ready. ( productID= SN= No=h-h ) [UC= FC=] [Classification] INFO [Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) has rebuilt data and its status has changed to “ready”. aa : Internal number indicating physical disk type bbb...b : Disk array name ccc...c : Product ID of disk array (S2800 Disk Array etc.) ddd...
Chapter 2 Message List iSM07461: State of POOL has become ready. ( productID= SN= No=h Name=) [Classification] INFO [Explanation] It indicates that the pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) has become ready. [Measures] aaa...a : Disk array name bbb...b : Product ID of disk array (S2800 Disk Array etc.) ccc...c : Serial number of disk array dddd : Pool number eee...
Chapter 2 Message List iSM07463: State of POOL has become attn(reduce). ( productID= SN= No=h Name=) [Classification] ERROR [Explanation] It indicates that the pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) has become a reduced state. [Measures] aaa...a : Disk array name bbb...b : Product ID of disk array (S2800 Disk Array etc.) ccc...c : Serial number of disk array dddd : Pool number eee...
Chapter 2 Message List iSM07465: State of POOL has become attn(preventive copy). ( productID= SN= No=h Name=) [Classification] NOTICE [Explanation] It indicates that data in a pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) has been copied into a spare disk. [Measures] aaa...a : Disk array name bbb...b : Product ID of disk array (S2800 Disk Array etc.) ccc...c : Serial number of disk array dddd : Pool number eee...
Chapter 2 Message List iSM07501: Request is meaningless(already) [Explanation] It indicates that the request for starting or terminating the disk array monitoring has already executed. This message is output on UNIX system. [Measures] Unnecessary iSM07503: Resource table is re-created [Explanation] It indicates that the request is suspended since the disk array configuration is changed. This message is output on UNIX system. [Measures] Retry.
Chapter 2 Message List iSM07506: Request cancel [Explanation] It indicates that the request is cancelled since due to disk array failure, etc. This message is output on UNIX system. [Measures] For disk array failure, retry after recovering the disk array. For other cases, retry after investigating the cause from syslog or iSM operation log. iSM07507: Disk array is not watched [Explanation] It indicates that the request cannot be executed since the specified disk array is not being monitored.
Chapter 2 Message List iSM07512: Specified disk array is not managed [Explanation] It indicates that the specified disk array name is not managed by the iSM server. This message is output on UNIX system. [Measures] Retry after checking the disk array name. iSM07513: Disk array is busy(configuration) [Explanation] It indicates that the request cannot be executed since the disk array is in the configuration setting status.
Chapter 2 Message List iSM07552: Invalid parameter has detected. (code=) [Classification] NOTICE [Explanation] It indicates that invalid parameter has been detected in state monitoring process. aaa...a [Measures] : Internal error code Execute again. If the same phenomenon recurs, investigate the cause with syslog or iSM operation log. iSM07553: Process killed [Classification] NOTICE [Explanation] It indicates that signal reception caused the process end.
Chapter 2 Message List iSM07555: System call error has occurred. [func= errno=] (code=) [Classification] NOTICE [Explanation] It indicates that system error occurred in state monitoring process. [Measures] aaa...a : Function name bbb...c : Error number ccc...c : Internal error code Execute again. If the same phenomenon recurs, investigate the cause with syslog or iSM operation log. iSM07556: Insufficient resource has detected. (code=
Chapter 2 Message List iSM07601: Attribute of LD has configured. () [Classification] NOTICE [Explanation] It indicates that attribute of LD is configured for the disk array (name: aaa...a). aaa...a [Measures] : Disk array name Unnecessary iSM07602: LD movement terminated. (
Chapter 2 Message List iSM07616: The capacity of SRA used is over threshold.( productID= SN= No=h Name= capacity=GB threshold=GB) [Classification] WARNING [Explanation] It indicates that the used capacity of snapshot reserve area (number: dddd and name: eee...e) in disk array (name: aaa...a) exceeded specified threshold values. For Windows, this message is target of ESMPRO Manager Report. [Measures] aaa...a : Disk array name bbb...
Chapter 2 Message List iSM07617: The capacity of SRA used is under threshold.( productID= SN= No=h Name= capacity=GB threshold=GB) [Classification] INFO [Explanation] It indicates that the used capacity of pool (number: dddd and name: eee...e) in disk array (name: aaa...a) fell below specified threshold values. [Measures] aaa...a : Disk array name bbb...b : Product ID of disk array (S2800 Disk Array etc.) ccc...
Chapter 2 Message List iSM07620: Expansion State of POOL has become normal-end. ( productID= SN= No=h Name=)[_ALERT_] [Classification] INFO [Explanation] It indicates that capacity expansion of a pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) normally ended. For Windows, this message is target of ESMPRO Manager Report. [Measures] aaa...a : Disk array name bbb...b : Product ID of disk array (S2800 Disk Array etc.) ccc...
Chapter 2 Message List iSM07622: Expansion State of POOL has become expand-fail. ( productID= SN= No=h Name=)[_ALERT_] [Classification] ERROR [Explanation] It indicates that capacity expansion of a pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) failed. For Windows, this message is target of ESMPRO Manager Report. [Measures] aaa...a : Disk array name bbb...b : Product ID of disk array (S2800 Disk Array etc.) ccc...
Chapter 2 Message List iSM07670: Expansion State of POOL has become normal-end. ( productID= SN= No=h Name=)[ UC= FC=][_ALERT_] [Classification] INFO [Explanation] It indicates that capacity expansion of a pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) normally ended. For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. [Measures] aaa...
Chapter 2 Message List iSM07671: Expansion State of POOL has become expanding. ( productID= SN= No=h Name=)[ UC= FC=][_ALERT_] [Classification] NOTICE [Explanation] It indicates that the capacity of a pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) is being expanded. For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. [Measures] aaa...a : Disk array name bbb..
Chapter 2 Message List iSM07672: Expansion State of POOL has become expand-fail. ( productID= SN= No=h Name=)[ UC= FC=][_ALERT_] [Classification ERROR [Explanation] It indicates that capacity expansion of a pool (number: dddd, name: eee...e) of a disk array (name: aaa...a) failed. For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. [Measures] aaa...a : Disk array name bbb...
Chapter 2 Message List iSM07950: Illegal write data has been detected. (, LD=(h), host-info=) [Classification] WARNING [Explanation] It indicates that an invalid write request on disk array was detected by data retention function. aaa...a : Name of disk array that detected invalid write request. bbb...b : Name of logical disk that detected invalid write request. cccc : Number of logical disk that detected invalid write request. ddd...
Chapter 2 Message List iSM08000∼ iSM08020: Disk array= logging is started interval= [Classification] INFO [Explanation] It indicates that data accumulation started on statistic information history file. [Measures] aaa...a : Disk array name bb : Accumulation interval (minute) Unnecessary iSM08021: Disk array= logging is stopped [Classification] INFO [Explanation] It indicates that accumulation into statistics information history file has been stopped. aaa...
Chapter 2 Message List iSM08030: Disk array= logging is already started [Classification] NOTICE [Explanation] It indicates that accumulation into statistics information history file has already been started. aaa...a [Measures] : Disk array name Check whether the specified disk array name is correct. iSM08031: Disk array=
Chapter 2 Message List iSM08033: Disk array= does not exist [Classification] NOTICE [Explanation] The following status is indicated. (1) The specified disk array does not exist. (2) PerformanceMonitor has not been purchased for specified disk array aaa...a [Measures] : Disk array name Specify the correct disk array name.
Chapter 2 Message List iSM08036: Disk array= is overload [Classification] NOTICE [Explanation] It indicates that accumulation of statistics information cannot be started due to the following causes. (1) There are so many disk array components that statistic information cannot be collected by specified logging interval. (2) The disk array is failed. aaa...
Chapter 2 Message List iSM08050: Performance data is over threshold (disk array= [, type=] [, number=] : (), threshold=()>) [Classification] WARNING [Explanation] Performance data of components in disk array exceeded specified threshold values. aaa...
Chapter 2 Message List iSM08052: Threshold monitoring condition has changed interval=() border= [Classification] NOTICE [Explanation] It indicates that threshold monitoring conditions have been changed.
Chapter 2 Message List iSM08054: Threshold excess state has been reset [Disk array=][type=][numb er=][<>] [Classification] NOTICE [Explanation] Threshold excess status has been released automatically. aaa...
Chapter 2 Message List iSM08056: Restoration of threshold monitoring object failed ([disk array=] [func=] [errno=] [detcode=]) [Classification] WARNING [Explanation] It indicates that restoration of threshold value failed. [Measures] aaa...a : Disk array name bbb...b : Name of function in which an error occurred. cccc : Error number dddddddd : Detail code Input error of threshold saving file or shortened display refresh rate is suspected as a possible cause.
Chapter 2 Message List iSM08060: Psl file {open|access|close} error func= errno= detcode= file= [Classification] [Explanation] WARNING It indicates that error occurred in open/access/close of statistics information history file. aaa...a : Function name with error. bbbb : Error number cccccccc : Detail code of error ddd...d : File name The followings are the main reasons for this message output.
Chapter 2 Message List iSM08062: Psl file name is over max value [Classification] WARNING [Explanation] It indicates that file name of statistics information history file has been over the maximum value. [Measures] Review the file name of statistics information history file or the storage directory. iSM08063: Psl file already exist (disk array= file=) [Classification] INFO [Explanation] It indicates that a statistics information history file has already existed.
Chapter 2 Message List iSM08071: Change directory failed dirname= errno= detcode= [Classification] NOTICE [Explanation] It indicates that it failed to change the directory. aaa...a [Measures] : Directory name bbbb : Error code cccccccc : Detail code Remove the cause of trouble and restart the iSM server. iSM08072: Insufficient resource detected func=
Chapter 2 Message List iSM08092: To get performance data failed from disk array= type= number= detcode= [Classification] NOTICE [Explanation] It indicates that I/O error occurred in disk array collecting statistics information. aaa...a : Disk array name bbb...
Chapter 2 Message List iSM08094: System call error occurred func= errno= detcode= [Classification] NOTICE [Explanation] It indicates that abnormalities occurred in iSM server operation. [Measures] aaa...a : Function name bbbb : Error code cccccccc : Detail code Restart iSM server. iSM08099: Program error occurred detcode= [Classification] NOTICE [Explanation] It indicates that internal contradiction has been detected.
Chapter 2 Message List iSM08181: Specified value is the same as current value( times/minute) [Classification] NOTICE [Explanation] The specified value is same as current display refresh rate. The command will be ignored. a [Measures] : Specified refresh rate Unnecessary iSM08182: Can’t change display refresh rate(:) [Classification] NOTICE [Explanation] Display refresh rate cannot be changed for the causes shown in aaa...a. aaa...
Chapter 2 Message List iSM08183: Specified value is not allowed as display refresh rate( times/minute) [Classification] NOTICE [Explanation] The specified value is not allowed as a display refresh rate. a [Measures] : Specified refresh rate Review the specified value. iSM08201: Illegal performance data was received from disk array= type= number= detcode= [Classification] NOTICE [Explanation] Performance data collected from HW is illegal. aaa...
Chapter 2 Message List iSM08900: Process busy when terminate emergency. unexpected error message maybe generated. [Classification] WARNING [Explanation] The performance monitoring instructed emergency stop. could not be stopped immediately. This message is output on Windows system.
Chapter 2 Message List iSM09000 ∼ iSM09001: System call error occurred func= errno= detcode= [Classification] NOTICE [Explanation] It indicates that an error occurred in iSM server operation. [Measures] aaa...a : Function name bbbb : Error code cccccccc : Detail code Restart iSM server. iSM09002: Start LD movement from () to () in [Classification] NOTICE [Explanation] It indicates that the logical disk movement starts.
Chapter 2 Message List iSM09003: LD movement from () to () in [Classification] NOTICE [Explanation] It indicates that the logical disk movement process has been completed. aaaa : Logical disk number of moved material logical disk bbb...b : Logical disk name of moved material logical disk cccc : Logical disk number of work disk for Optimization ddd...d : Logical disk name of work disk for Optimization eee...e : Disk array name fff...
Chapter 2 Message List iSM09004: Changed LD movement speed from () to () in [Classification] NOTICE [Explanation] It indicates that the logical disk movement speed is changed. [Measures] aaaa : Logical disk number of moved material logical disk bbb...b : Logical disk name of moved material logical disk cccc : Logical disk number of work disk for Optimization ddd...d : Logical disk name of work disk for Optimization eee...
Chapter 2 Message List iSM09006: Failed in communication with func= errno= detcode= [Classification] NOTICE [Explanation] It indicates that an error has occurred on the internal communication process. [Measures] aaaa : Communication target bbb...b : Function name cccc : Error code dddddddd : Detail code Remove the cause of the error and restart the iSM server. iSM09007: To create process failed func=
Chapter 2 Message List iSM09008: Make directory failed dirname= func= errno= detcode= [Classification] NOTICE [Explanation] It indicates that it has failed to create the directory. [Measures] aaa...a : Directory name bbb...b : Function name cccc : Error code dddddddd : Detail code Remove the cause of the error and restart the iSM server. iSM09009: Change directory failed dirname= func=
Chapter 2 Message List iSM09010: Request of start LD movement from () to () in is rejected detcode= [Classification] NOTICE [Explanation] It indicates that the request to move the logical disk was rejected. [Measures] aaaa : Logical disk number of moved material logical disk bbb...b : Logical disk name of moved material logical disk cccc : Logical disk number of work disk for Optimization ddd...
Chapter 2 Message List iSM09012: Request of change LD movement speed from () to () in is rejected detcode= [Classification] NOTICE [Explanation] It indicates that the request to change the logical disk movement speed was rejected. [Measures] aaaa : Logical disk number of moved material logical disk bbb...b : Logical disk name of moved material logical disk cccc : Logical disk number of work disk for Optimization ddd...
Chapter 2 Message List iSM09014: Failed in termination of LD movement from () to () in detcode= [Classification] NOTICE [Explanation] It indicates that the attempt to terminate the logical disk movement process failed. [Measures] aaaa : Logical disk number of moved material logical disk bbb...b : Logical disk name of moved material logical disk cccc : Logical disk number of work disk for Optimization ddd...
Chapter 2 Message List iSM09016: The schedule of LD movement from () to () in registered. schedule time=// : range= [Classification] NOTICE [Explanation] It indicates that moving schedule of logical disks has been registered. aaaa : Logical disk number of moved material logical disk bbb...b : Logical disk name of moved material logical disk cccc : Logical disk number of work disk for Optimization ddd...
Chapter 2 Message List iSM09018: The schedule of LD movement from () to () in deleted. [Classification] NOTICE [Explanation] It indicates that moving schedule of registered logical disks has been canceled. [Measures] aaaa : Logical disk number of moved material logical disk bbb...b : Logical disk name of moved material logical disk cccc : Logical disk number of work disk for Optimization ddd...d : Logical disk name of work disk for Optimization eee...
Chapter 2 Message List iSM09020: The schedule of LD movement from () to () in changed. schedule time=// : range= [Classification] NOTICE [Explanation] It indicates that moving schedule of registered logical disks has been changed. aaaa : Logical disk number of moved material logical disk bbb...b : Logical disk name of moved material logical disk cccc : Logical disk number of work disk for Optimization ddd...
Chapter 2 Message List iSM09022: Failed to start the scheduled LD movement from () to () in . detcode= [Classification] NOTICE [Explanation] It indicates that a logical disk to which the moving schedule has been registered cannot be started to move within the re-execution continuing time, or that it cannot be started to move because its configuration is changed. [Measures] aaaa : Logical disk number of moved material logical disk bbb...
Chapter 2 Message List iSM09101: Bsl file open failed func= errno= detcode= filename= [Classification] WARNING [Explanation] Failed to open the Bsl file. [Measures] aaa...a : Function name bbbb : Error code cccccccc : Detail code ddd...d : Bsl file name Check the Bsl file and the file system, remove the cause of the error and restart the iSM server. iSM09102: Bsl file remove failed func= errno= detcode= filename=
Chapter 2 Message List iSM09103: Bsl file rename failed func= errno= detcode= filename= [Classification] WARNING [Explanation] Failed to change the Bsl file name. [Measures] aaa...a : Function name bbbb : Error code cccccccc : Detail code ddd...d : Bsl file name Check the Bsl file and the file system, remove the cause of the error and restart the iSM server. iSM09104: Bsl file write failed func=
Chapter 2 Message List iSM09105: Bsl file seek failed func= errno= detcode= [rankno=] filename= [Classification] WARNING [Explanation] Seek in the Bsl file failed. [Measures] aaa...a : Function name bbbb : Error code cccccccc : Detail code dddd : RANK number of the data that could not be positioned eee...e : Bsl file name Check the Bsl file and the file system, remove the cause of the error and restart the iSM server.
Chapter 2 Message List iSM09107: Bsl file close failed func= errno= detcode= filename= [Classification] WARNING [Explanation] Failed to close the Bsl file. [Measures] aaa...a : Function name bbbb : Error code cccccccc : Detail code ddd...d : Bsl file name Check the Bsl file and the file system, remove the cause of the error and restart the iSM server.
Chapter 2 Message List iSM10000 ∼ iSM10001: comm error: main sc=h ec=h [Classification] NOTICE [Explanation] It indicates that it failed in connection/disconnection to iSM server. [Measures] aaa : Code indicating location of error bbb...b : Error code Check whether abnormalities have occurred in the configuring process on the iSM server machine and restart the iSM server. iSM10002: comm error: main sc=h ec=
Chapter 2 Message List iSM10040: func error: main sc=h ec=h [Classification] NOTICE [Explanation] It indicates that abnormal termination occurred in the state monitoring function of replication management. [Measures] aaa : Code indicating location of error bbb...b : Error code Check whether abnormalities have occurred in the configuring process on the iSM server machine and restart the iSM server. iSM10100: comm error: Agent sc=h ec=
Chapter 2 Message List iSM10102: comm error: Agent sc=h ec=h [Classification] NOTICE [Explanation] It indicates that it failed to process the telegram receiving from disk array. [Measures] aaa : Code indicating location of error bbb...b : Error code Check whether abnormalities have occurred in the configuring process on the iSM server. iSM10103: sys error: Agent sc=h ec=
Chapter 2 Message List iSM10106: DiskArrayName(=) has changed [Classification] NOTICE [Explanation] Specified disk array name has been changed. aaa...a [Measures] : Disk array name Check whether the disk array name hasn’t been changed. Specify the newest one. iSM10200: comm error: client sc=h ec=h [Classification] NOTICE [Explanation] It indicates that it failed to process the telegram receiving. [Measures] aaa : Code indicating location of error bbb...
Chapter 2 Message List iSM10210: comm error: client sc=h ec=h [Classification] NOTICE [Explanation] It indicates that the telegram message contained an abnormality. [Measures] aaa : Code indicating location of error bbb...b : Error code Failed in communication process with iSM client. If it is a transient failure, check whether abnormalities have occurred in the connection environment between iSM server and iSM client and connect again.
Chapter 2 Message List iSM10302: command: , , status=failed (h/- h/h) [Classification] INFO [Explanation] It indicates that it failed in accessing the disk array (failure of SCSI protocol). [Measures] aaa...a : Command name bbb...
Chapter 2 Message List iSM10304: command: , = (h) , status=failed (h/h/h) [Classification] INFO [Explanation] It indicates that it failed in accessing the volume expressed in logical disk name (failure of SCSI protocol). [Measures] aaa...a : Command name bbb...b : Volume classification ccc...c : Logical disk name dddd : Logical disk number eee...
Chapter 2 Message List iSM10306: command: , volume=h , status=failed (ec=) [Classification] INFO [Explanation] It indicates that it failed in accessing the volume expressed in volume number (failure except for SCSI protocol). [Measures] aaa...a : Command name bbbb : Logical disk number ccc...c : Disk array name ddd...d : Error code Check whether the configuration of disk array has been changed. iSM10307: command: , =(h)
Chapter 2 Message List iSM10308: command: , mv= (h) , rv= (h) , status=failed (h/h/h) [Classification] INFO [Explanation] It indicates that it failed in accessing the pair expressed in MV or RV (failure of SCSI protocol). [Measures] aaa...a : Command name bbb...b : Logical disk name cccc : Logical disk number ddd...
Chapter 2 Message List iSM10310: command: , = (h) [Classification] NOTICE [Explanation] It indicates that setting operation to volume expressed in logical disk name has been executed. aaa...a : Command name bbb...b : Volume classification ccc...c : Logical disk name dddd : Logical disk number eee...e : Disk array name As for command name, refer to the “Data Replication User’s Manual (Function Guide)”. [Measures] Unnecessary iSM10311: command:
Chapter 2 Message List iSM10312: command: , mv= (h) , rv= (h) [Classification] NOTICE [Explanation] It indicates that setting operation to the pair expressed in MV or RV has been executed. aaa...a : Command name bbb...b : Logical disk name cccc : Logical disk number ddd...d : Disk array name As for command name, refer to the “Data Replication User’s Manual (Function Guide)”.
Chapter 2 Message List iSM10314: Logical Disks were paired: mv=(h) , rv=(h) [, several states changed.] [Classification] NOTICE [Explanation] It indicates that paired volumes were detected. If two or more state transitions occurred within a polling interval and the midway states could not be identified, “several states changed” is output to indicate that multiple state transitions occurred. [Measures] aaa...
Chapter 2 Message List iSM10316: Replication state of pair was changed: mv=(h) , Activity State=, Sync State=, Copy Control State=, rv= (h) [, Activity State= , Sync State=, Copy Control State=][,several states changed.] [Classification] NOTICE [Explanation] It indicates that change of replication state (Replicate/Restore/Separate, etc.) of paired volume was detected.
Chapter 2 Message List fff...f : Copy control state normal suspend : Copy suspending abnormal suspend : Copy fault suspending [Measures] background copy : Background copy foreground(sync) : Foreground copy (synchronous) foreground(semi) : Foreground copy (semi-synchronous) Invalid : Invalid Unnecessary iSM10317: command: , LD= (h) , mode= [Classification] NOTICE [Explanation] It indicates that the command was executed. aaa...a : Command name bbb.
Chapter 2 Message List iSM10318: Replication state of Logical Disk was changed: LD=(h) , Restriction= [,several states changed.] [Classification] NOTICE [Explanation] It indicates that change of logical disk status was detected. If two or more state transitions occurred within a polling interval and the midway states could not be identified, “several states changed” is output to indicate that multiple state transitions occurred. aaa...
Chapter 2 Message List iSM10321: command: , ATgroup= [, classification=][, New ATgroup Name=][, Mode=, Copy Mode=][, Restriction=] [Classification] NOTICE [Explanation] It indicates that a command related to AT-group was executed. aaa...
Chapter 2 Message List hhh...h : RV access restriction [Measures] Unnecessary iSM10322: command: , ATgroup= , LD=(h) [Classification] NOTICE [Explanation] It indicates that a command related to AT-group was executed. aaa...a : Name of the executed command enter volume for group : Add volume (pair) into AT-group. remove volume from group : Delete volume (pair) from AT-group [Measures] bbb...
Chapter 2 Message List iSM10323: ATgroup created: ATgroup= , classification=, Mode=, Copy Mode=, ATgroup State =, Sync State=, Volume Number=[, several states changed.] [Classification] NOTICE [Explanation] It indicates that an AT-group has been newly created. aaa...a : AT-group (concentrator) name bbb...b : Disk array name ccc...c : AT-group type ddd...
Chapter 2 Message List hhhh Rst/suspend : Restore suspend state Invalid : Invalid : Number of the registered volumes [Measures] Unnecessary iSM10324: ATgroup deleted: ATgroup= , classification= [Classification] NOTICE [Explanation] It indicates that an AT-group has been deleted. [Measures] aaa...a : AT-group (concentrator) name bbb...b : Disk array name ccc...
Chapter 2 Message List iSM10325: Replication state of ATgroup was changed: ATgroup= , classification=[, New ATgroup Name =], Mode=, Copy Mode=, ATgroup State=, Sync State=, Volume number=[, several states changed.] [Classification] NOTICE [Explanation] It indicates that the state of an AT-group has been changed.
Chapter 2 Message List iiii [Measures] Separated : Separated state Rpl/start : Replicate start state Rpl/exec : Replicate execution state Rpl/sync : Replicate synchronous Rpl/suspend : Replicate suspend state Rst/exec : Restore execution state Rst/suspend : Restore suspend state Invalid : Invalid : Number of the registered volumes Unnecessary iSM10330: inconsistency of product revision of diskarray: mv=, rv=
Chapter 2 Message List iSM10331: command: , ATgroup(concentrator)=h [], status=failed(h/h/h) [Classification] INFO [Explanation] It indicates that access to the concentrator indicated by the concentrator number failed (SCSI protocol failure). aaa...a : Command name bbbb : AT-group (concentrator) number ccc...c : Disk array name of AT-group (concentrator) ddd...
Chapter 2 Message List iSM10332: command: , ATgroup(distributor)=h [], status=failed(h/h/h) [Classification] INFO [Explanation] It indicates that access to the distributor indicated by the distributor number failed (SCSI protocol failure). aaa...a : Command name bbbb : AT-group (distributor) number ccc...c : Disk array name of AT-group (distributor) ddd...
Chapter 2 Message List iSM10334: command: , ATgroup(distributor)=h [], status=failed(ec=) [Classification] INFO [Explanation] It indicates that access to the distributor indicated by the distributor number failed (failure except for SCSI protocol). [Measures] aaa...a : Command name bbbb : AT-group (distributor) number ccc...c : Disk array name of AT-group (distributor) ddd...d : Disk array name of AT-group (concentrator) eee...
Chapter 2 Message List iSM10401: copy error:mv=(h) , rv=(h) , status=h [,ATgroup=] [UC= FC=][_ALERT_] [Classification] ERROR [Explanation] It indicates the information of volume in which copy fault occurred. For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. [Measures] aaa...a : Logical disk name bbbb : Logical disk number ccc...
Chapter 2 Message List iSM10402: link error:Disk Array=, linkno=, portno=, state=h [Classification] WARNING [Explanation] It indicates that a fault, freeze, or checking state has occurred in the link between disk arrays. For Windows, this message is target of ESMPRO Manager Report. aaa...a : Disk array name bbb...b : Link number of RemoteDataReplication ccc...c : Port number for link of RemoteDataReplication ddd...
Chapter 2 Message List iSM10403: Disk array info ( S/N= Product-ID=) [UC= FC=][_ALERT_] [Classification] ERROR [Explanation] It indicates additional information of disk array in which copy fault occurred. For the pair composed by RemoteDataReplication, additional information of disk array of each of MV and RV is output. For Windows, this message is target of ESMPRO Manager Report, and also to be target of ALIVE/Express Report via ESMPRO. [Measures] aaa...
Chapter 2 Message List iSM10411: comm error:report event type=h, ec=h [Classification] NOTICE [Explanation] It indicates that it failed in receiving telegram from iSM server. aaaaaaaa : Telegram code which indicates the telegram that occurred abnormality bbb...b [Measures] : Error code Check whether abnormalities have occurred in the configuring process on the iSM server. iSM10420: comm error:report sc=h, ec=
Chapter 2 Message List iSM10440: func error:report sc=h, ec=h [Classification] NOTICE [Explanation] It indicates that it failed in the transmission of trouble report to iSM client. [Measures] aaa : Code indicating location of error bbb...b : Error code Check whether abnormalities have occurred in the configuring process on the iSM server. iSM10501: command option error:option=, status=
Chapter 2 Message List iSM10503: array state error:status= [Classification] ERROR [Explanation] It indicates that it failed to refer to information due to the device status. aaa...a [Measures] : Device status Check the device status and re-execute. iSM10504: acquire information error:status= [Classification] ERROR [Explanation] It indicates that it failed to obtain information. a [Measures] : Detail code Check the system resource and re-execute.
Chapter 2 Message List iSM10900: Process is busy when it terminates emergency. Unexpected error message maybe generated. [Classification] WARNING [Explanation] It indicates that the replication management received a request for emergency stop, but could not terminate the process immediately.
Chapter 2 Message List iSM11000 ∼ iSM11100: Command completed successfully. [Classification] INFO [Explanation] Command execution succeeded. [Measures] Unnecessary iSM11101: Setup of the Disk Array Subsystem is done according to specified parameter. () [Classification] INFO [Explanation] Setting of the disk array is executed according to the specified parameter. aaa...a [Measures] : Additional information Unnecessary iSM11102: Specified Disk Array Subsystem is not monitored.
Chapter 2 Message List iSM11103: Specified Disk Array Subsystem is monitored by iSM. (Under processing to stop monitoring.. ) [Classification] INFO [Explanation] Specified disk array is being monitored by iSM server though monitoring stop process is being executed. [Measures] Stop monitoring disk array and execute it again. iSM11104: Disk Array Subsystem ‘’ was selected. [Classification] INFO [Explanation] The Disk Array “aaa...a” has been selected. aaa...
Chapter 2 Message List iSM11106: The start of the configuration operation was notified to Disk Array Subsystem. [Classification] INFO [Explanation] Start of configuration operation was notified to the disk array. [Measures] Unnecessary iSM11107: The end of the configuration operation was notified to Disk Array Subsystem. [Classification] INFO [Explanation] The end of configuration operation was notified to a disk array. [Measures] Unnecessary iSM11108: was started.
Chapter 2 Message List iSM11109: was terminated. [Classification] INFO [Explanation] aaa...a (iSMconf,iSMautobind) was terminated. aaa...a [Measures] : Program name Unnecessary iSM11110: Command completed abnormally. [Classification] INFO [Explanation] With “All information” option selected, failed in obtaining (a part of) information about disk array. [Measures] Check the status of the disk array. iSM11151: Failed to get information or set configuration. (
Chapter 2 Message List iSM11153: Cannot establish the communication path. [Classification] INFO [Explanation] Communication pass cannot be established. [Measures] Check whether iSMsvr has started. iSM11154: Failed to request notification for start of . [Classification] INFO [Explanation] It failed in notifying the request for start of aaa...a. aaa...a [Measures] : Program name Check whether iSMsvr has started. iSM11155: Failed to request notification for termination of .
Chapter 2 Message List iSM11162: Disk Array Subsystem which can be operated by this program is not found. [Classification] INFO [Explanation] No such disk array as is an object of support of iSM can be found. [Measures] Terminate the program. Check that the iSM server covers the disk array as monitoring target, and also check the environmental definition of the iSM server and the connection with the disk array. For more information, refer to Part III “Operations” in the “User’s Manual”.
Chapter 2 Message List iSM11171: PD group doesn’t exist. [Classification] INFO [Explanation] PD group does not exist. [Measures] Check the status of the disk array. iSM11172: RANK doesn’t exist. [Classification] INFO [Explanation] RANK does not exist [Measures] Check the status of the disk array. iSM11173: LD doesn’t exist. [Classification] INFO [Explanation] LD does not exist. [Measures] Check the status of the disk array. iSM11174: PD doesn’t exist.
Chapter 2 Message List iSM11175: PORT doesn’t exist. [Classification] INFO [Explanation] PORT does not exist. [Measures] Check the status of the disk array. iSM11176: Permitted PORT for LD doesn’t exist. [Classification] INFO [Explanation] Port with access permission (to LD) does not exist. [Measures] Check the status of the disk array. iSM11178: LD Set doesn’t exist. [Classification] INFO [Explanation] There is no LD Set. [Measures] Check the status of the disk array.
Chapter 2 Message List iSM11180: Specified option is not supported by specified disk array subsystem. [Classification] INFO [Explanation] The specified option is not supported by the specified disk array. [Measures] Specify a disk array which supports the information of the specified option. iSM11182: Pool doesn’t exist. [Classification] INFO [Explanation] Pool does not exist. [Measures] Check the state of the disk array. iSM11183: Snapshot Pool doesn’t exist.
Chapter 2 Message List iSM11220: Port #h-h was selected. [Classification] INFO [Explanation] Port aa-bb was selected. aa-bb [Measures] : Port number Unnecessary iSM11221: View Host Permit List was selected. [Classification] INFO [Explanation] View host permit list was selected. [Measures] Unnecessary iSM11222: View LD Assign List was selected. [Classification] INFO [Explanation] View LD assign list was selected. [Measures] Unnecessary iSM11230: Access Control is not supported.
Chapter 2 Message List iSM11231: Port configuration is required. [Classification] INFO [Explanation] Port configuration is needed. [Measures] Execute it after selecting the port. iSM11232: Cannot set Access Control function. Cross call function should be working for using Access Control function. It is set up from the main menu. [Classification] INFO [Explanation] Access Control function cannot be set. Cross Call function must work when using Access Control function.
Chapter 2 Message List iSM11234: Corresponding LD is not found. [Classification] INFO [Explanation] Corresponding LD cannot be found. [Measures] Check the status of the disk array. iSM11235: Effective LD without being in List. [Classification] INFO [Explanation] A nonexistent logical disk was specified. [Measures] Specify a logical disk that exists. iSM11236: Setting over this ineffective.
Chapter 2 Message List iSM11240: PDG #h was selected. [Classification] INFO [Explanation] PDG aa was selected. aa [Measures] : PDG number Unnecessary iSM11241: Cannot set up LD, because number of PD is not sufficient. [Classification] INFO [Explanation] LD cannot be set because the number of PD is insufficient. [Measures] Check the status of the disk array. iSM11242: All settings are cleared. [Classification] INFO [Explanation] All settings are cleared.
Chapter 2 Message List iSM11251: Failed to open a file. [Classification] INFO [Explanation] It failed in opening a file. [Measures] Check the content of the file. iSM11252: Succeeded in loading a file. [Classification] INFO [Explanation] It succeeded in loading a file. [Measures] Unnecessary iSM11253: Illegal file parameter. [Classification] INFO [Explanation] File parameter is invalid. [Measures] Check the content of the file. iSM11255: Cannot bind LD by specified parameter.
Chapter 2 Message List iSM11257: Succeeded in saving a file. [Classification] INFO [Explanation] It succeeded in saving a file. [Measures] Unnecessary iSM11258: Failed to save a file. [Classification] INFO [Explanation] It failed in saving a file. [Measures] Check whether the specification of the file name and the save destination are correct. iSM11300: This program configures Disk Array Subsystem. [Classification] INFO [Explanation] This program configures disk array.
Chapter 2 Message List iSM11305: IMPORTANT NOTICE: Stop IO access to this Disk Array Subsystem from the host before executing this command which has parameter of “all” or “High Reliability Mode : off”. Otherwise the data in LD may be destroyed. [Classification] INFO [Explanation] IMPORTANT NOTICE: Stop accessing to this disk array from the host before executing this command which has the parameter of [all] or [High Reliability Mode:off]. [Measures] Otherwise, the data in LD may be invalid.
Chapter 2 Message List iSM11308: ATTENTION: PD Recovery History data will be deleted. [Classification] INFO [Explanation] Attention: PD Recovery History data will be deleted. [Measures] Unnecessary iSM11309: ATTENTION: Internal Log data will be deleted. [Classification] INFO [Explanation] ATTENTION: Internal Log data will be deleted. [Measures] Unnecessary iSM11310: ATTENTION: Media Error List data will be deleted.
Chapter 2 Message List iSM11320: LD capacity which is bound will be MB. [Classification] INFO [Explanation] LD capacity which is bound will become aa MB. aa [Measures] : LD capacity Unnecessary iSM11321: System space of 2MB is added to LD, and LD is bound. [Classification] INFO [Explanation] System space of 2MB is added to LD, and LD is bound. [Measures] Unnecessary iSM11322: The address which can be specified is “h” or “h”.
Chapter 2 Message List iSM11323: Cannot bind LD by specified RANK. (unsupported RAID type/unsupported stripe size) [Classification] INFO [Explanation] LD cannot be bound in the specified RANK (unsupported RAID type/unsupported stripe size). [Measures] Check the status of RANK. iSM11330: Failed to get Disk Array Subsystem information. [Classification] INFO [Explanation] It failed in getting the information of disk array. [Measures] Check the status of the disk array. iSM11340: Now downloading.
Chapter 2 Message List iSM11361: Specified LD is not found. [Classification] INFO [Explanation] Specified LD cannot be found. [Measures] Check the status of the disk array. iSM11362: Failed to bind RANK. [Classification] INFO [Explanation] It failed in binding RANK. [Measures] Check the status of the disk array. iSM11363: Failed to bind some RANKs. [Classification] INFO [Explanation] It failed in binding some RANKs. [Measures] Check the status of the disk array.
Chapter 2 Message List iSM11365: Specified PD doesn’t exist. [Classification] INFO [Explanation] Specified PD does not exist. [Measures] Check the status of the disk array. iSM11366: Specified RANK doesn’t exist. [Classification] INFO [Explanation] Specified RANK does not exist. [Measures] Check the status of the disk array. iSM11367: Specified Hot Spare doesn’t exist. [Classification] INFO [Explanation] Specified Hot spare does not exist. [Measures] Check the status of the disk array.
Chapter 2 Message List iSM11370: Failed to read F/W file. [Classification] INFO [Explanation] It failed in reading F/W file. [Measures] Check whether the path and name of specified F/W file is normal. iSM11372: Disk Array Subsystem is not found. [Classification] INFO [Explanation] Disk array cannot be found. [Measures] Check whether it is the monitoring object of iSM. iSM11373: Specified F/W file is not conformable to the target resource F/W.
Chapter 2 Message List iSM11375: The directory may have been deleted or changed. Please specify file name by absolute path. [Classification] INFO [Explanation] The directory may have been deleted or changed. Specify the file name by absolute path. [Measures] Unnecessary iSM11376: Cannot bind LD, because number of LD exceeds the range that can be specified. [Classification] INFO [Explanation] LD cannot be bound, because number of LDs exceeds the range that can be specified.
Chapter 2 Message List iSM11378: Not enough space to bind LD. [Classification] INFO [Explanation] Space to bind LD is insufficient. [Measures] Check the space of RANK. iSM11379: Not enough space to bind LD. Only LDs be able to be bound. [Classification] INFO [Explanation] Space to bind LD is insufficient. Only aa number of LDs will be able to be bound. aa [Measures] : Number of LD which can be bound Check the space of RANK. iSM11380: Failed to allocate a memory space.
Chapter 2 Message List iSM11382: LDs was bound successfully. But some LDs failed to bind. [Classification] INFO [Explanation] It succeeded to bind aa number of LDs, but it failed in binding some LDs. aa [Measures] : Number of LD which has already been bound Check the status of RANK. iSM11383: Succeeded in downloading of the following . (hex) : [Classification] INFO [Explanation] It succeeded in downloading of the following aaa...a [Measures] aaa...
Chapter 2 Message List iSM11385: The following didn’t download. [Classification] INFO [Explanation] The following aaa...a was not downloaded. aaa...a [Measures] : Download resource name Check the status of the disk array and download only the unexecuted one. iSM11402: Auto assignment was selected. () [Classification] INFO [Explanation] Auto assignment was selected. aaa...
Chapter 2 Message List iSM11405: Cannot bind SPARE by specified parameter. () [Classification] INFO [Explanation] SPARE cannot be bound by specified parameter. aaa...a [Measures] : Additional information Check whether the input parameter is correct. iSM11406: Cannot bind RANK by specified parameter. () [Classification] INFO [Explanation] RANK cannot be bound by specified parameter. aaa...a [Measures] : Additional information Check whether the input parameter is correct.
Chapter 2 Message List iSM11409: Cross call was selected. () [Classification] INFO [Explanation] Cross call was selected. aaa...a [Measures] : Additional information Unnecessary iSM11410: Subsystem control mode was selected. () [Classification] INFO [Explanation] Subsystem control mode was selected. aaa...a [Measures] : Additional information Unnecessary iSM11412: Expand lun was selected.() [Classification] INFO [Explanation] Expand LUN was selected. aaa...
Chapter 2 Message List iSM11414: Cannot open a firmware file. [Classification] INFO [Explanation] Firmware file cannot be opened. [Measures] Check whether the path and name of the firmware file is correct. iSM11415: Illegal resource type was selected. [Classification] INFO [Explanation] Selected resource is incorrect. [Measures] Check whether the firmware file belongs to a target resource. iSM11416: Firmware download was selected. (
Chapter 2 Message List iSM11419: Target Disk Array Subsystem specified by firmware file is not found. [Classification] INFO [Explanation] Object disk array specified by firmware file is not found. [Measures] Check whether the firmware file belongs to a target disk array. iSM11420: Cannot bind some RANKs that was specified. () [Classification] INFO [Explanation] Some RANKs that was specified cannot be bound. aaa...a [Measures] : Additional information Check the status of the disk array.
Chapter 2 Message List iSM11423: Hot SPARE bind custom was selected. () [Classification] INFO [Explanation] Hot spare bind custom was selected. aaa...a [Measures] : Additional information Unnecessary iSM11424: Hot SPARE bind standard was selected. () [Classification] INFO [Explanation] Hot spare bind standard was selected. aaa...a [Measures] : Additional information Unnecessary iSM11425: Hot SPARE unbind was selected. (
Chapter 2 Message List iSM11426: LD unbind was selected. () [Classification] INFO [Explanation] LD unbind was selected. aaa...a [Measures] : Additional information Unnecessary iSM11429: RANK is not found in specified PDG. () [Classification] INFO [Explanation] RANK is not found in the specified PDG. aaa...a [Measures] : Additional information Check the status of the disk array. iSM11431: Auto repair was selected. (
Chapter 2 Message List iSM11439: LD ownership was selected. () [Classification] INFO [Explanation] LD ownership was selected. aaa...a [Measures] : Additional information Unnecessary iSM11440: Dynamic capacity expansion was selected. () [Classification] INFO [Explanation] Dynamic capacity expansion was selected. aaa...a [Measures] : Additional information Unnecessary iSM11442: RANK bind custom was selected. (
Chapter 2 Message List iSM11443: RANK bind standard was selected. () [Classification] INFO [Explanation] RANK bind standard was selected. aaa...a [Measures] : Additional information Unnecessary iSM11444: RANK unbind was selected. () [Classification] INFO [Explanation] RANK unbind was selected. aaa...a [Measures] : Additional information Unnecessary iSM11455: Temp. sense interval was selected. [Classification] INFO [Explanation] Temp. sense interval was selected.
Chapter 2 Message List iSM11487: The resource that F/W is downloaded to may be not present. () [Classification] INFO [Explanation] The resource of downloading destination may be not mounted. aaa...a [Measures] : Additional information Check the status of the disk array. iSM11501: LD information was selected. [Classification] INFO [Explanation] “LD information” was selected. [Measures] Unnecessary iSM11502: LD No./Name information was selected.
Chapter 2 Message List iSM11504: RANK/PD information was selected. [Classification] INFO [Explanation] “RANK/PD information” was selected. [Measures] Unnecessary iSM11505: PD information was selected. [Classification] INFO [Explanation] “PD information” was selected. [Measures] Unnecessary iSM11506: RANK map information was selected. [Classification] INFO [Explanation] “RANK map information” was selected. [Measures] Unnecessary iSM11507: PD recovery history init. was selected.
Chapter 2 Message List iSM11508: Media error list init. was selected. [Classification] INFO [Explanation] “Median error list init.” was selected. [Measures] Unnecessary iSM11509: Subsystem view current setting was selected. [Classification] INFO [Explanation] “Subsystem view current setting” was selected. [Measures] Unnecessary iSM11510: Maintenance view current setting was selected. [Classification] INFO [Explanation] “Maintenance view current setting” was selected.
Chapter 2 Message List iSM11522: Media error list doesn’t exist. [Classification] INFO [Explanation] Media Error List does not exist. [Measures] Unnecessary iSM11531: Disk Array Subsystem list information option was selected. [Classification] INFO [Explanation] “Disk Array Subsystem list information” option was selected. [Measures] Unnecessary iSM11532: Disk Array Subsystem detail information option was selected. (
Chapter 2 Message List iSM11533: LD list information option was selected. () [Classification] INFO [Explanation] “LD list information” option was selected. aaa...a [Measures] : Additional information Unnecessary iSM11534: LD detail information option was selected. () [Classification] INFO [Explanation] “LD detail information” option was selected. aaa...a [Measures] : Additional information Unnecessary iSM11535: PD list information option was selected. (
Chapter 2 Message List iSM11536: PD detail information option was selected. () [Classification] INFO [Explanation] “PD detail information” option was selected. aaa...a [Measures] : Additional information Unnecessary iSM11537: Port information with LD key option was selected. () [Classification] INFO [Explanation] “Port information with LD key” option was selected. aaa...
Chapter 2 Message List iSM11539: Controller information option was selected. () [Classification] INFO [Explanation] “Controller information” option was selected. aaa...a [Measures] : Additional information Unnecessary iSM11540: Enclosure information option was selected. () [Classification] INFO [Explanation] “Enclosure information” option was selected. aaa...a [Measures] : Additional information Unnecessary iSM11542: Enclosure resource doesn’t exist. (
Chapter 2 Message List iSM11543: Port information option was selected. () [Classification] INFO [Explanation] “Platform information” option was selected. aaa...a [Measures] : Additional information Unnecessary iSM11544: Specified Resource does not exist. [Classification] INFO [Explanation] Specified resource does not exist. [Measures] Check input resource name and resource number, and retry processing. iSM11545: Cache doesn’t exist.
Chapter 2 Message List iSM11548: Volume list data is not found. [Classification] ERROR [Explanation] A volume list data does not exist or specified volume does not exist in the volume list data. [Measures] Check a volume name with reference to the volume list data, and input the volume name again. If a volume table is not displayed, create a volume list. iSM11549: Cannot make or refresh volume list data. [Classification] ERROR [Explanation] Creation of a volume list data failed.
Chapter 2 Message List iSM11561: Rebuild option was selected. () [Classification] INFO [Explanation] “Rebuild” option was selected. aaa...a [Measures] : Additional information Unnecessary iSM11562: Spare Rebuild option was selected. () [Classification] INFO [Explanation] “Spare Rebuild” option was selected. aaa...a [Measures] : Additional information Unnecessary iSM11563: iSMrepair was executed. [Classification] INFO [Explanation] iSMrepair was executed.
Chapter 2 Message List iSM11565: PD Number was too large. [Classification] INFO [Explanation] PD number exceeds the range that can be specified. [Measures] Check whether the input parameter is correct. iSM11566: RANK Number was too large. [Classification] INFO [Explanation] RANK number exceeds the range that can be specified. [Measures] Check whether the input parameter is correct. iSM11567: PD Group Number is different. [Classification] INFO [Explanation] PD Group Number is different.
Chapter 2 Message List iSM11569: RANK detail information option was selected. [Classification] INFO [Explanation] “RANK detail information” option was selected. [Measures] Unnecessary iSM11570: Access Control list information option was selected. [Classification] INFO [Explanation] “Access Control list information” option was selected. [Measures] Unnecessary iSM11571: LD Set information with LD Set key option was selected.
Chapter 2 Message List iSM11572: All information option was selected. [Classification] INFO [Explanation] “All information” option was selected. [Measures] Unnecessary iSM11573: Controller detail information option was selected. () [Classification] INFO [Explanation] “Controller detail information” option was selected. aaa...a [Measures] : Additional information Unnecessary iSM11574: Enclosure detail information option was selected. (
Chapter 2 Message List iSM11575: LD Set detail information option was selected.() [Classification] INFO [Explanation] “LD Set detail information” option was selected. aaa...a [Measures] : Additional information Unnecessary iSM11576: ReallocationControl information option was selected. [Classification] INFO [Explanation] “ReallocationControl information” option was selected. [Measures] Unnecessary iSM11577: Cache segment list information option was selected.
Chapter 2 Message List iSM11578: Cache segment detail information with LDN key option was selected. [Classification] INFO [Explanation] “Cache Segment detail information with LDN key” option was selected. [Measures] Unnecessary iSM11579: Cache segment detail information with LD name key option was selected. [Classification] INFO [Explanation] “Cache Segment detail information with LD Name key” option was selected. [Measures] Unnecessary iSM11580: Pool list information option was selected.
Chapter 2 Message List iSM11581: Pool detail information with Pool Number key option was selected. [Classification] INFO [Explanation] “Pool detail information with Pool Number key” option was selected. [Measures] Unnecessary iSM11582: Pool detail information with Pool Name key option was selected. [Classification] INFO [Explanation] “Pool detail information with Pool Number key” option was selected. [Measures] Unnecessary iSM11583: Snapshot Pool list information option was selected.
Chapter 2 Message List iSM11585: Snapshot Pool detail information with Pool Number key option was selected. [Classification] INFO [Explanation] “Snapshot Pool detail information with Pool Number key” option was selected. [Measures] Unnecessary iSM11586: Snapshot LD list information option was selected. [Classification] INFO [Explanation] “Snapshot LD list information” option was selected. [Measures] Unnecessary iSM11587: Snapshot LD detail information option was selected.
Chapter 2 Message List iSM11601: Failed to communicate. [Classification] INFO [Explanation] It failed to communicate. [Measures] Check whether iSMsvr has started. iSM11602: Failed to set Log output environment. [Classification] INFO [Explanation] It failed in setting environment for Log output. [Measures] Unnecessary iSM11603: Only an Administrators group can execute. [Classification] INFO [Explanation] Execution is allowed for users belonging to Administrators group only.
Chapter 2 Message List iSM11605: Please wait a minute. [Classification] INFO [Explanation] The configuration information is now being obtained(/output). Please wait for a minute. [Measures] Please wait for a minute. iSM11700: Please wait a minute. [Classification] INFO [Explanation] The volume list is now being created/updated. [Measures] Please wait for a minute. Please wait for a minute. iSM11701: Volume list is created successfully.
Chapter 2 Message List iSM11703: Option is insufficient. [Classification] ERROR [Explanation] It indicates that the required option is not specified or invalid option is specified. [Measures] Specify the correct option. iSM11704: Specified option are duplicated. [Classification] ERROR [Explanation] It indicates that the specified options are duplicated. This message is output on Windows system. [Measures] Specify the correct option. iSM11705: Options which can not control are specified.
Chapter 2 Message List iSM11707: Combination of options is illegal. [Classification] ERROR [Explanation] It indicates that combination of options is illegal. This message is output on Windows system. [Measures] Specify the correct option. iSM11708: Form of parameter is illegal. [Classification] ERROR [Explanation] It indicates that the form of parameter is illegal. This message is output on Windows system. [Measures] Specify the correct parameter form. iSM11709: Parameter is too long.
Chapter 2 Message List iSM11711: Volume list data does not exist. [Classification] WARNING [Explanation] Volume list does not exist. [Measures] Create/update the volume list. iSM11712: Volume list data is not created by the command which supports property display. [Classification] WARNING [Explanation] The property of the volume list could not be obtained because it is old. [Measures] If the property is required, recreate the volume list.
Chapter 2 Message List iSM11721: Disk Array does not exist in volume list data. [Classification] ERROR [Explanation] It indicates that the disk array information is not registered in the volume list. [Measures] Check the connection between the host machine and the disk array, and newly create the volume list. iSM11722: Volume does not exist in volume list data. [Classification] ERROR [Explanation] It indicates that the logical disk information is not registered in the volume list.
Chapter 2 Message List iSM11724: Specified ld_name does not exist in volume list data. [Classification] ERROR [Explanation] It indicates that the specified logical disk name is not registered in the volume list. This message is output on Windows system. [Measures] Specify the correct logical disk name. iSM11725: Specified drive does not exist in volume list data. [Classification] ERROR [Explanation] It indicates that the specified drive letter is not registered in the volume list.
Chapter 2 Message List iSM11727: Specified HBT does not exist in volume list data. [Classification] ERROR [Explanation] It indicates that the specified HBT is not registered in the volume list. This message is output on Windows system. [Measures] Specify the correct HBT. iSM11728: Specified HBT or LUN does not exist in volume list data. [Classification] ERROR [Explanation] It indicates that the specified HBT or LUN is not registered in the volume list. This message is output on Windows system.
Chapter 2 Message List iSM11730: Failed to get the specified Disk Array information. [Classification] ERROR [Explanation] It indicates that the disk array information collection is failed. This message is output on Windows system. [Measures] Check the connection between the host machine and the disk array, and newly create a volume list. iSM11731: Specified Disk Array is not supported.
Chapter 2 Message List iSM11733: Failed to initialize an ODM session. [Classification] ERROR [Explanation] Failed in initialization of ODM session. [Measures] Check that ODM environment is normal and retry processing. Check that system memory capacity is sufficient and retry processing. iSM11734: Failed to terminate an ODM session. [Classification] ERROR [Explanation] Failed in termination of ODM session. [Measures] Check that ODM environment is normal, and then retry processing.
Chapter 2 Message List iSM11737: Failed to get control volume definitions. [Classification] ERROR [Explanation] Failed in obtaining control volume definitions. [Measures] Check that control volume definition file is described correctly, and then retry processing. iSM11738: Failed to get target volume definitions. [Classification] ERROR [Explanation] Failed in obtaining target volume definitions.
Chapter 2 Message List iSM11740: Failed to get property of volume list data. [Classification] ERROR [Explanation] Failed in obtaining the property of volume list data. [Measures] Update the volume list, and then retry processing. iSM11742: Failed to open control volume definition file. [Classification] ERROR [Explanation] Failed in opening control volume definition file. [Measures] Check that control volume definition file exists, and then retry processing.
Chapter 2 Message List iSM11745: Failed to close control volume definition file. [Classification] ERROR [Explanation] Failed in closing control volume definition file. [Measures] Check that control volume definition file exists, and then retry processing. iSM11746: Failed to close target volume definition file. [Classification] ERROR [Explanation] Failed in closing target volume definition file. [Measures] Check that target volume definition file exists, and then retry processing.
Chapter 2 Message List iSM11749: Control volume is not found. [Classification] ERROR [Explanation] Control volume is not found. [Measures] Check that control volume definition file is described correctly, and then create a target-control volume list again. iSM11750: Failed to execute popen. [Classification] ERROR [Explanation] Execution of the popen() function failed. This message is output on UNIX system. [Measures] Check descriptions in operation log and remove causes of failure.
Chapter 2 Message List iSM11751: ReplicationControl or iSMvollist command has already started. iSM11751: iSMvollist command has already started. iSM11751: iSMmknod command has already started. iSM11751: iSM/Server has already started. [Classification] ERROR [Explanation] Reference or update of Volume List was executed during execution of the replication control command. The volume list is being updated by the iSMvollist command.
Chapter 2 Message List iSM11756: Illegal OS version [Classification] ERROR [Explanation] This version of OS is not supported for ReplicationControl. This message is output on UNIX system. [Measures] ReplicationControl cannot be used. iSM11757: SCSI path-through driver is not installed. [Classification] ERROR [Explanation] The SCSI path-through driver is not installed in the system. This message is output on UNIX system. [Measures] Install the SCSI path-through driver in the system.
Chapter 2 Message List iSM11758: System call error (error code=) [Classification] ERROR [Explanation] The system call failed when the volume list was created.
Chapter 2 Message List iSM11759: Failed to open control volume in Diagnostic mode. [Classification] ERROR [Explanation] Control volume cannot be opened in Diagnostic mode. [Measures] Check that LVM has not been activated on control volume and has not been opened by other application in Diagnostic mode. Then retry processing. iSM11760: Volume list data is locked by another process. [Classification] ERROR [Explanation] Volume list has been created/modified by other process.
Chapter 2 Message List iSM11783: Failed to read volume list data. [Classification] ERROR [Explanation] It indicates that it failed to read the volume list. [Measures] The volume list may be invalid. Create a new volume list. iSM11784: Failed to write volume list data. [Classification] ERROR [Explanation] It indicates that it failed to write the volume list. This message is output on Windows system. [Measures] The volume list may be invalid. Create a new volume list.
Chapter 2 Message List iSM11787: Failed to rename volume list data. [Classification] ERROR [Explanation] It indicates that the file name of the volume list is not changed due to an error. This message is output on Windows system. [Measures] The volume list may be invalid. Create a new volume list. iSM11791: Failed to read directory. [Classification] ERROR [Explanation] It indicates that the directory is not read. This message is output on Windows system.
Chapter 2 Message List iSM11794: Failed to open scsi device. [Classification] ERROR [Explanation] It indicates that SCSI device is not opened due to an error. [Measures] Check the connection between the host machine and the disk array, and newly create a volume list. iSM11795: Failed to get OS version. [Classification] ERROR [Explanation] It indicates that OS version is not obtained due to an error. [Measures] This program is not supported by the OS you currently use.
Chapter 2 Message List iSM11799: Failed to execute system function. [Classification] ERROR [Explanation] It indicates that an error occurred in the system function of OS. [Measures] OS may be in instability or invalid. Set the OS in a stable condition by restarting or re-installing the OS. iSM11801: Failed to create log files. [Classification] INFO [Explanation] Failed in creating log file. [Measures] Check that creation of file is allowed in the log file output directory.
Chapter 2 Message List iSM11804: Failed to get ‘’ log. [Classification] INFO [Explanation] Failed in obtaining log from disk array indicated by “aaa...a”. [Measures] Check status of iSM server and disk array, and then retry processing.
Chapter 2 Message List iSM13000 ∼ iSM13200: [Classification] INFO [Explanation] Executed command line. aaa...a [Measures] : Entered character string Unnecessary iSM13201: Replicate Start MV: RV: [Classification] INFO [Explanation] Replicate processing start message. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second ggg...g : Volume name Unnecessary iSM13202: Replicate Normal End MV:
Chapter 2 Message List iSM13203: Replicate Abnormal End MV: RV: [Classification] INFO [Explanation] Replicate processing abnormal termination message. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second ggg...g : Volume name Check the message displayed immediately before to handle it. iSM13204: Restore Start MV: RV: [Classification] INFO [Explanation] Restore processing start message.
Chapter 2 Message List iSM13206: Restore Abnormal End MV: RV: [Classification] INFO [Explanation] Restore processing abnormal termination message. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second ggg...g : Volume name Check the message displayed immediately before to handle it. iSM13207: Separate Start MV: RV: [Classification] INFO [Explanation] Separate processing start message.
Chapter 2 Message List iSM13209: Separate Abnormal End MV: RV: [Classification] INFO [Explanation] Separate processing abnormal termination message. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second ggg...g : Volume name Check the message displayed immediately before to handle it. iSM13210: Change Start MV: RV:
Chapter 2 Message List iSM13212: Change Abnormal End MV: RV: [Classification] INFO [Explanation] Copy Control State change processing abnormal termination message. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second ggg...g : Volume name Check the message displayed immediately before to handle it. iSM13213: Wait Abnormal End MV: RV:
Chapter 2 Message List iSM13215: These targets have already separated. () MV: RV: [Classification] INFO [Explanation] Specified volume has already been separated. Separation condition is not displayed for separation normally ended aaa...a : Separation condition cancel : forced separation fault bbb...b [Measures] : fault separation : Volume name Unnecessary iSM13216: These targets have already restored. MV: RV:
Chapter 2 Message List iSM13219: return= [Classification] INFO [Explanation] It indicates that processing returned from a function. The name, return value and return information of function are edited and output with arbitrary character strings. [Measures] aaa...a : Function name bbb...b : Return value of function (decimal) ccc...c : Return information of function Unnecessary iSM13220: Setting drive letter () has succeeded.
Chapter 2 Message List iSM13221: Resetting drive letter () has succeeded. iSM13221: Resetting mount point () has succeeded. [Classification] INFO [Explanation] The drive letter or the NTFS folder mount point was canceled successfully. This message is output on Windows system. [Measures] aaa...a : Drive name bbb...b : Path Unnecessary iSM13222: Reading signature succeeded.
Chapter 2 Message List iSM13224: MV is restored. Volume Name: Mount Point: [Classification] INFO [Explanation] The MV is to be restored by the restore command. This message is output on Windows system. [Measures] aaa...a : Mount point volume name bbb...
Chapter 2 Message List iSM13227: Flush Abnormal End [Classification] INFO [Explanation] Buffer flush processing abnormal termination message. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second Check the message displayed immediately before to handle it. iSM13228: Scan Start [Classification] INFO [Explanation] Device scan processing start message.
Chapter 2 Message List iSM13230: Scan Abnormal End [Classification] INFO [Explanation] Device scan processing abnormal termination message. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second. Check the message displayed immediately before to handle it. iSM13231: Writing signature succeeded. volume= [Classification] INFO [Explanation] The disk signature information was written successfully. This message is output on Windows system. aaa...
Chapter 2 Message List iSM13233: Deleting of signature information from signature map file has succeeded. [Classification] INFO [Explanation] All the disk signature information was deleted from the signature map file successfully. This message is output on Windows system. [Measures] Unnecessary iSM13234: Exporting file succeeded. filename= iSM13234: Exporting file succeeded. records [Classification] INFO [Explanation] The disk signature information was written successfully.
Chapter 2 Message List iSM13238: Freeze of database is started. // - :: [Classification] INFO [Explanation] Freeze of database is started. aaaa/bb/cc : System date (year/month/day) when freeze of database started. dd:ee:ff : System time (hour:minute:second) when freeze of database started. [Measures] Unnecessary iSM13239: All of database were thawed. //
- :: [Classification] INFO [Explanation] All databases were thawed.
Chapter 2 Message List iSM13241: SnapshotBackup Normal End // - :: [Classification] INFO [Explanation] Snapshot backup processing has terminated normally. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second Unnecessary iSM13242: SnapshotBackup Abnormal End //
- :: [Classification] INFO [Explanation] Snapshot backup processing has terminated abnormally.
Chapter 2 Message List iSM13244: SnapshotRestore Normal End // - :: [Classification] INFO [Explanation] Snapshot restore processing has terminated normally. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second Unnecessary iSM13245: SnapshotRestore Abnormal End //
- :: [Classification] INFO [Explanation] Snapshot restore processing has terminated abnormally.
Chapter 2 Message List iSM13248: Command has completed successfully.(already) (code=---< bbb...b>) [Classification] INFO [Explanation] The requested state has already been set up, and command execution was successful. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Unnecessary iSM13250: Snapshot has been deleted. SV: (code=---< ccc...
Chapter 2 Message List iSM13251: Create Start [Classification] INFO [Explanation] Snapshot create processing start message. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second Unnecessary iSM13252: Create Normal End [Classification] INFO [Explanation] Snapshot create processing normal end message.
Chapter 2 Message List iSM13254: Delete Start [Classification] INFO [Explanation] Snapshot delete processing start message. [Measures] aaaa/bb/cc : Year/Month/Day dd:ee:ff : Hour/Minute/Second Unnecessary iSM13255: Delete Normal End [Classification] INFO [Explanation] Snapshot delete processing normal end message.
Chapter 2 Message List iSM13400: Specified volume state has already been set up. (code=---< bbb...b>) [Classification] WARNING [Explanation] Specified volume state has already been set up. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check specified volume state and re-execute. iSM13401: This iSM/Server version does not support necessary function. (code=--
Chapter 2 Message List iSM13403: Specified attribute () was already set up to the ATgroup. ATG= (code=---< ddd...d>) [Classification] WARNING [Explanation] Specified attribute has already been set up to the AT-group. aaa...a : Specified attribute value bbb…b : AT-group name ccc...c : Process number ddd...d : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13406: Specified targets are duplicated. MV= (code=---< ccc...c>) iSM13406: Specified targets are duplicated. volume= (code=---< ccc...c>) [Classification] WARNING [Explanation] MV or BV is defined repeatedly. aaa...a : Volume name bbb...b : Process number ccc…c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check the volume specification.
Chapter 2 Message List iSM13408: These targets have replicated. ATG= (code=---< ccc...c>) iSM13408: These targets have replicated. MV: RV: (code=---< ccc...c>) [Classification] WARNING [Explanation] A command, which must not be executed for volumes or AT-groups with Replicate being completed, was executed. aaa...a : AT-group name or volume name bbb...
Chapter 2 Message List iSM13409: These targets have separated. ATG=> (code=---< ccc...c>) iSM13409: These targets have separated. MV: RV:> (code=---< ccc...c>) [Classification] WARNING [Explanation] A command, which must not be executed for volumes or AT-groups with Separate being completed, was executed. aaa...a : AT-group name or volume name bbb...
Chapter 2 Message List iSM13410: These targets have restored. MV: RV: (code=---< ccc...c>) [Classification] WARNING [Explanation] A command, which must not be executed for volumes with Restore being completed, was executed. aaa...a : Volume name bbb...b : Process number ccc…c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13413: Target pair’s copy mode is foreground. [Classification] WARNING [Explanation] A request was made for a pair of volumes to change from the foreground copy state into the synchronous copy mode or semi synchronous copy mode. [Measures] Move the volumes into normal suspend state, and then change the copy mode. iSM13414: Conflict of volume list data has been detected. Please update volume list data.
Chapter 2 Message List iSM13480: Target ATgroup is replicating now. ATG= (code=---< ccc...c>) [Classification] WARNING [Explanation] The specified AT-group is in the state of replicate start (Rpl/start) or replicate execution (Rpl/exec), and replicate has been already started. aaa...a : AT-group name bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13482: Target ATgroup is separating now. ATG= (code=---< ccc...c>) [Classification] WARNING [Explanation] The specified AT-group is in the state of separate start (Sep/start) or separate execution (Sep/exec), separation has been already started. aaa...a : AT-group name bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13500: Insufficient option. () [Classification] ERROR [Explanation] The specified command does not have some required arguments, or invalid arguments are specified. When -file option is specified, an available option is specified for the pair specified by the replication operation file. () may or may not be displayed. aaa...a [Measures] : Specified value Specify the necessary arguments in the command line.
Chapter 2 Message List iSM13503: Too many options are specified. () [Classification] ERROR [Explanation] Too many values are specified in the argument. aaa...a [Measures] : Specified value Check the input format and enter it again. iSM13504: Illegal combination of options. () [Classification] ERROR [Explanation] An invalid combination of arguments are specified in the command line. aaa...a [Measures] : Specified value Check the input format and enter it again.
Chapter 2 Message List iSM13507: Illegal rvflg type. () [Classification] ERROR [Explanation] The value specified as RV type is invalid. aaa...a [Measures] : Specified value Specify a correct value. iSM13508: Illegal cprange type. () [Classification] ERROR [Explanation] The value specified in -cprange is invalid. aaa...a [Measures] : Specified value Specify a correct value. iSM13509: Illegal cpmode type. (
Chapter 2 Message List iSM13511: Illegal force type. () [Classification] ERROR [Explanation] The value specified in -force is invalid. aaa...a [Measures] : Specified value Specify a correct value. iSM13512: Illegal copy mode. [Classification] ERROR [Explanation] A copy mode is not specified. Or, the specified copy mode is not supported as copy control mode for the target pair. [Measures] Specify a correct value.
Chapter 2 Message List iSM13513: Volume () does not exist in volume list. [Classification] ERROR [Explanation] Specified volume does not exist in the volume list. If you use the control volume for operation, the specified volume or volume paired with the specified volume should be accessible from the relevant business server with the Access Control or other functions.
Chapter 2 Message List iSM13514: Volume name is too long. () [Classification] ERROR [Explanation] The specified volume name is too long. aaa...
Chapter 2 Message List iSM13517: Number of LD(MV) is not equal to that of LD(RV). [Classification] ERROR [Explanation] The number of volumes specified for MV and RV are different. This message is output on UNIX system. [Measures] Make the number of MV and RV volumes equal. iSM13518: Illegal value of -wait [second]. () (code=---< ccc...c>) [Classification] ERROR [Explanation] The value specified for the monitoring time interval is out of the specified range. aaa.
Chapter 2 Message List iSM13519: Illegal value of RPL_WATCHDEV. () (code=---< ccc...c>) [Classification] [Explanation] ERROR The value specified in the environment variable RPL_WATCHDEV is invalid. (UNIX) The value specified in RPL_WATCHDEV of the replication operation option setting file is not allowed. (Windows) aaa...a : Specified value bbb...b : Process number ccc…c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13521: Specified volume group does not exist vg= iSM13521: Specified disk group does not exist dg= [Classification] ERROR [Explanation] An invalid volume group or disk group is specified. This message is output on UNIX system. [Measures] aaa...a : Volume group bbb...b : Disk group Specify the correct volume group or disk group.
Chapter 2 Message List iSM13524: No such file filename= errno= [Classification] ERROR [Explanation] The specified file does not exist. [Measures] aaa...a : File name bbb : Error number Specify a correct file name. iSM13525: Illegal file type filename= [Classification] ERROR [Explanation] The specified file type cannot be processed. aaa...a [Measures] : File name Specify the file created by the regular file. (UNIX) Specify a file created as a text file.
Chapter 2 Message List iSM13527: Illegal character is included. filename= line= [Classification] ERROR [Explanation] An invalid character exists in the description in the file. [Measures] aaa...a : File name bbb...b : Number of lines Correct the file and execute it again. iSM13528: Line has too many characters. filename= line= [Classification] ERROR [Explanation] More than 1024 characters (1-byte) are specified in one line. [Measures] aaa...
Chapter 2 Message List iSM13530: Illegal MV type is specified. filename= line= [Classification] ERROR [Explanation] An invalid value was specified in MV Type. [Measures] aaa...a : File name bbb...b : Number of lines Specify a correct value for MV Type.. iSM13531: Illegal iopath type. () (code=---< ccc...c>) [Classification] ERROR [Explanation] Value specified for -iopath option is invalid. aaa...a : Specified value bbb...
Chapter 2 Message List iSM13533: MV name is too long. error filename= line= iSM13533: RV name is too long. error filename= line= iSM13533: Specified volume name is too long. error filename= line= [Classification] ERROR [Explanation] The specified volume name is too long. [Measures] aaa...a : File name bbb...
Chapter 2 Message List iSM13535: ATgroup does not exist. (code=---< ccc...c>) iSM13535: ATgroup does not exist. ATG= (code=---< ccc...c>) [Classification] ERROR [Explanation] The specified AT-group does not exist. aaa...a Or, no operational AT-group is found. : Specified AT-group name bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13537: Number of LD(MV) is not equal to that of LD(RV). filename= line= [Classification] ERROR [Explanation] The number of volumes specified for MV and RV are different. [Measures] aaa...a : File name bbb...b : Number of lines Make the number of volumes of MV and RV equal. iSM13538: Specified file is empty. filename= line= [Classification] ERROR [Explanation] Volume information is not defined in the specified file. [Measures] aaa.
Chapter 2 Message List iSM13540: Illegal volflg type () [Classification] ERROR [Explanation] The value specified in the -vol type is invalid. aaa...a [Measures] : Specified value Specify a correct value. iSM13541: Semi-sync mode is not available to DynamicDataReplication. [Classification] ERROR [Explanation] Semi-sync mode cannot be specified for pairs in the same disk array. [Measures] Change the copy mode and execute it. iSM13542: Specified targets are not paired.
Chapter 2 Message List iSM13543: Illegal atmode type. () (code=---< ccc...c>) [Classification] ERROR [Explanation] The value specified in the -atmode option is invalid. aaa...a : Specified value bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a correct value. iSM13544: Illegal value of concentrator number. () (code=---< ccc...
Chapter 2 Message List iSM13545: Illegal site type. () (code=---< ccc...c>) [Classification] ERROR [Explanation] The value specified in the -site option is invalid. aaa...a : Specified value bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a correct value. iSM13547: Specified partition does not exist.
Chapter 2 Message List iSM13549: Failed to replicate. [Classification] ERROR [Explanation] Replicate failed. [Measures] Check the message displayed immediately before to handle it. iSM13550: Failed to restore. [Classification] ERROR [Explanation] Restore failed. [Measures] Check the message displayed immediately before to handle it. iSM13551: Failed to separate. [Classification] ERROR [Explanation] Separate failed. [Measures] Check the message displayed immediately before to handle it.
Chapter 2 Message List iSM13553: Illegal value of RPL_LIMWATCHDEV. () (code=---< ccc...c>) [Classification] ERROR [Explanation] The specified value of an environment variable or RPL_LIMWATCHDEV of the replication operation option setting file is out of the specified range. aaa...a : Specified value bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13555: Checking status failed. (detail error code=) [Classification] ERROR [Explanation] A failure was detected during wait mode process and volume state could not be obtained. aaa : Error code The following show major error codes.
Chapter 2 Message List iSM13556: SCSI I/O error has occurred. [Classification] ERROR [Explanation] SCSI I/O error has occurred. [Measures] A failure may be occurring in connection with disk array. Check status of FC connection and then retry processing. If no problems are found in status of FC connection, check the following for the specified volume. Then retry processing. - A special file or physical disk exists for the volume. - The volume is not set to Not Ready or Not Available.
Chapter 2 Message List iSM13559: Parameter error occurred. [Classification] ERROR [Explanation] Parameter error occurred in the internal processing. [Measures] Collect information on operation trace iSM13560: State of the specified ATgroup is unknown. (code=---< bbb...b>) [Classification] ERROR [Explanation] State of the specified AT-group is unknown. aaa...a : Process number bbb...
Chapter 2 Message List iSM13562: RV is omitted. [Classification] ERROR [Explanation] RV was omitted for MV with the pair setting of multiple RVs. [Measures] Specify RV and execute it again. iSM13563: System call error (error code=) [Classification] ERROR [Explanation] It failed in system calling. aaa [Measures] : System error number If the operation trace is collected, use the information in the operation trace and the error code to find the cause and remove it.
Chapter 2 Message List iSM13565: Upper pair is not separated. [Classification] ERROR [Explanation] The activity state of the pair of the specified MV and the upper pair is not Separate. [Measures] Make the activity state of the upper pair separate state, and retry processing. To replicate the target pair when the activity state of the upper pair is Replicate, set the copy control mode on the target pair to the background copy mode and replicate it. iSM13566: Lower pair is not separated.
Chapter 2 Message List iSM13568: Target ATgroup is processing Atomic-break now. ATG= (code=---< ccc...c>) [Classification] ERROR [Explanation] Request was rejected because atomic-break is operating on the specified AT-group. aaa...a : AT-group name bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check the state of the AT-group and the state of the pair registered in the AT-group.
Chapter 2 Message List iSM13569: Target ATgroup is replicating now. ATG= (code=---< ccc...c>) iSM13569: Target pair is replicating now. (code=---< ccc...c>) [Classification] ERROR [Explanation] The specified pair is being replicated. Or, the specified AT-group is in the replicate start (Rpl/start) or replicate execution (Rpl/exec) state. aaa...a : AT-group name bbb...b : Process number ccc...
Chapter 2 Message List iSM13570: Target ATgroup is restoring now. ATG= (code=---< ccc...c>) iSM13570: Target pair is restoring now. (code=---< ccc...c>) [Classification] ERROR [Explanation] The specified pair is being restored. Or, the specified AT-group is in the restore execution (Rst/exec) state. aaa...a : AT-group name bbb...b : Process number ccc...
Chapter 2 Message List iSM13571: Target ATgroup is separating now. ATG= (code=---< ccc...c>) iSM13571: Target pair is separating now. (code=---< ccc...c>) [Classification] ERROR [Explanation] The specified pair is being separated. Or the specified AT-group is in the separate start (Sep/start) or separate execution (Sep/exec) state. aaa...a : AT-group name bbb...b : Process number ccc...
Chapter 2 Message List iSM13573: Target ATgroup is not replicated. ATG= (code=---< ccc...c>) iSM13573: Target pair is not replicated or restored. (code=---< ccc...c>) [Classification] ERROR [Explanation] The activity state of the specified pair is not the Replicate or Restore state. Or, the sync state of the specified AT-group is not replicate synchronous. aaa...a : AT-group name bbb...b : Process number ccc...
Chapter 2 Message List iSM13575: Unexpected error occurred. [Classification] ERROR [Explanation] Message for an unexpected error. [Measures] Check library version for the replication operation, and check firmware revision of disk array device. iSM13576: Targets may not be a pair, or unexpected error occurred. [Classification] ERROR [Explanation] Specified volume is not paired. Or, it failed to obtain the pair activity state information.
Chapter 2 Message List iSM13578: These targets are separating now. MV: RV: (code=---< ccc...c>) [Classification] ERROR [Explanation] A non-executable replication operation command was performed for the pair in Separate execution. aaa...a : Volume name bbb...b : Process number ccc…c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13580: Target ATgroup is suspended now. ATG= (code=---< ccc...c>) [Classification] ERROR [Explanation] The sync state of the specified AT-group has become replicate suspend (Rpl/suspend) or restore suspend (Rst/suspend). aaa...a : AT-group name bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13582: These targets have separated. (code=---< ccc...c>) iSM13582: These targets have separated. ATG= (code=---< ccc...c>) [Classification] ERROR [Explanation] A command not allowed for separated volume or AT-group was executed. aaa...a : AT-group name bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13584: Not enough memory () errno= [Classification] ERROR [Explanation] Insufficient memory to execute the process. () and error number may or may not be displayed. [Measures] aaa...a : Resource name bbb : Error number Add more memory to the system. iSM13585: Volume list is missing or unexpected error occurred. error code= [Classification] ERROR [Explanation] Processing is interrupted because the volume list table does not exist.
Chapter 2 Message List iSM13586: Target ATgroup is fault. ATG= (code=---< ccc...c>) [Classification] ERROR [Explanation] The sync state of the specified AT-group has become failure separation (Fault). aaa...a : AT-group name bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] This AT-group may have been forcibly separated by another process or it may have a fault.
Chapter 2 Message List iSM13588: Specified ATgroup has already existed. (code=---< ccc...c>) iSM13588: Specified ATgroup has already existed. ATG= (code=---< ccc...c>) [Classification] ERROR [Explanation] The specified AT-group already exists. aaa...a : AT-group name bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13590: Specified ATgroup cannot be operated from this site. ATG= (code=---< ccc...c>) [Classification] ERROR [Explanation] Operation of the specified AT-group cannot be executed from the current position. AT-group binding is enabled on the concentrator side. aaa...a : AT-group name bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13592: Target ATgroup is not separated. ATG= (code=---< ccc...c>) iSM13592: Target pair is not separated. (code=---< ccc...c>) [Classification] ERROR [Explanation] The activity status of the specified pair is not Separate. Or, the specified AT-group sync state is not separated (Separated) or failure separation (Fault). aaa...a : AT-group name bbb...b : Process number ccc...
Chapter 2 Message List iSM13594: License for RemoteDataReplication /DisasterRecovery is locked. (code=---< bbb...b>) [Classification] ERROR [Explanation] The product of RemoteDataReplication/DisasterRecovery is not purchased. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13597: DynamicDataReplication is not supported. [Classification] ERROR [Explanation] The DynamicDataReplication function is not supported. [Measures] ReplicationControl cannot be used. iSM13598: RemoteDataReplication is not supported. [Classification] ERROR [Explanation] The RemoteDataReplication function is not supported. [Measures] ReplicationControl cannot be used. iSM13599: License for this command is locked.
Chapter 2 Message List iSM13600: Specified drive has multiple partitions/extents. [Classification] ERROR [Explanation] Specified physical disk is configured in multiple partitions, or logical volume in the specified volume disk is configured in multiple extensions (physical disk). This message is output on Windows system. [Measures] Physical disk status can be confirmed by Disk Management (Computer Management) for Windows. Settings for the replication operation option setting file (iSMrpl.
Chapter 2 Message List iSM13603: Partition that specified drive character assigned has multiple partitions/extents. [Classification] ERROR [Explanation] Specified disk to which the drive letter is allocated is configured in multiple partitions, or volume in the disk is configured in multiple extensions (physical disk). This message is output on Windows system. [Measures] Physical disk status can be confirmed by Disk Management (Computer Management) for Windows.
Chapter 2 Message List iSM13606: There is no authority to access the specified volume. (code=---< bbb...b>) iSM13606: There is no authority to access the specified pair. (code=---< bbb...b>) [Classification] ERROR [Explanation] The operation could not be executed because access to the specified pair or volume is not permitted.
Chapter 2 Message List iSM13607: Specified disk type is not supported. iSM13607: Specified drive type is not supported. [Classification] ERROR [Explanation] Specified disk or drive type is not supported. This message is output on Windows system. [Measures] Check the formats of the specified disk and connected device and retry command execution. Partition disk with the GPT (GUID Partition Table) format cannot be used. iSM13608: Specified partition has already mounted.
Chapter 2 Message List iSM13610: Illegal drive number is specified. [Classification] ERROR [Explanation] The specified disk number is illegal. This message is output on Windows system. [Measures] Specify a correct value. iSM13611: RemoteDataReplication/Disaster Recovery is not supported. (code=---< bbb...b>) [Classification] ERROR [Explanation] RemoteDataReplication/DisasterRecovery function is not supported.
Chapter 2 Message List iSM13612: Specified ATgroup is empty. ATG= (code=---< ccc...c>) [Classification] ERROR [Explanation] The specified AT-group does not have any registered pair. aaa...a : AT-group name bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] For operation of an AT-group, a pair must be registered in advance. iSM13613: Specified volume does not have signature.
Chapter 2 Message List iSM13614: Failed to read signature. iSM13614: Failed to read signature. volume= [Classification] ERROR [Explanation] The disk signature information could not be read. aaa...a [Measures] : Physical disk number If a message is output immediately before this message, take measures according to the message. If no message is output immediately before this message, check that no fault occurs on the volume and that it is readable, and then retry processing.
Chapter 2 Message List iSM13616: ATgroup cannot be registered any more. (code=---< bbb...b>) [Classification] ERROR [Explanation] No more AT-group can be registered. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] No more AT-group can be registered because the number of registered AT-groups has already reached the maximum number of AT-groups that can be registered to the disk array.
Chapter 2 Message List iSM13618: Specified volume does not exist in signature map file. volume= [Classification] ERROR [Explanation] The specified disk does not exist in the signature map file. This message is output on Windows system. aaa...a [Measures] : Physical disk number Specify a correct value. iSM13619: Writing signature failed. iSM13619: Writing signature failed. volume= [Classification] ERROR [Explanation] The signature could not be written into the signature map file.
Chapter 2 Message List iSM13623: Signature file access has failed. filename= errno= [Classification] ERROR [Explanation] Access to the signature map file could not be made. This message is output on Windows system. [Measures] aaa...a : File name bbb : Error number Take measures according to the message output immediately before this message. iSM13624: Specified volume has no mount point. (code=---< bbb...
Chapter 2 Message List iSM13625: Specified volume has more than one mount point. (code=---< bbb...b>) [Classification] ERROR [Explanation] The specified volume has multiple mount points (drive letter or NTFS folder name). aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] The volume should have only one mount point (drive letter or NTFS folder name).
Chapter 2 Message List iSM13627: Specified volume’s signature does not exist in file. filename= [Classification] ERROR [Explanation] The signature information of the specified disk does not exist in the signature map file. This message is output on Windows system. aaa...a [Measures] : File name Specify a correct value. iSM13629: Too long file name is specified. [Classification] ERROR [Explanation] The specified file name is too long. This message is output on Windows system.
Chapter 2 Message List iSM13631: Failed to mount. [Classification] ERROR [Explanation] Failed to mount. This message is output on Windows system. [Measures] Check the message displayed immediately before to handle it. iSM13632: Failed to umount. [Classification] ERROR [Explanation] Failed to unmount. This message is output on Windows system. [Measures] Check the message displayed immediately before to handle it. iSM13633: Failed to flush.
Chapter 2 Message List iSM13634: Failed to set drive letter. () iSM13634: Failed to set mount point. () [Classification] ERROR [Explanation] The drive letter or the NTFS folder mount point could not be set. This message is output on Windows system. [Measures] aaa...a : Drive letters bbb...b : Path Take measures according to the message output immediately before this message. iSM13635: Failed to reset drive letter. () iSM13635: Failed to reset mount point. (
Chapter 2 Message List iSM13636: Failed to initialize signature. iSM13636: Failed to initialize signature. volume= [Classification] ERROR [Explanation] The disk signature information could not be initialized. This message is output on Windows system. aaa...a [Measures] : Physical disk number Take measures according to the message output immediately before this message. iSM13637: Specified path () is not correct directory.
Chapter 2 Message List iSM13639: Specified path is not normal status. [Classification] ERROR [Explanation] File or directory cannot be read. This message is output on Windows system. [Measures] Check that the file or directory exists or access to the volume is permitted, and retry command execution. iSM13640: This iSM/Server version does not support necessary function. (code=---< bbb...b>) iSM13640: This iSM/Server version does not support necessary function for .
Chapter 2 Message List iSM13641: Firmware does not support necessary function. iSM13641: Firmware does not support function. [Classification] ERROR [Explanation] Functions of firmware necessary are not supported. aaa...
Chapter 2 Message List iSM13645: Target pair cannot be registered in specified ATgroup. MV= RV= (code=---< ddd...d>) iSM13645: Target pair cannot be registered in specified ATgroup. ATG= (code=---< ddd...d>) [Classification] ERROR [Explanation] The specified pair cannot be registered in the AT-group.
Chapter 2 Message List iSM13646: Specified mv volume is mounted. path= [Classification] ERROR [Explanation] The MV has been mounted. This message is output on UNIX system. aaa...a [Measures] : Path name of MV (special file name, volume path name, etc.) Unmount the MV, and then re-execute the command. iSM13647: These targets are not replicating now. MV: RV: [Classification] ERROR [Explanation] Specified pair is not in the replication status. aaa...
Chapter 2 Message List iSM13649: These targets are not restoring now. MV: RV: [Classification] ERROR [Explanation] Specified pair is not in the restoration status. aaa...a [Measures] : Volume name Check the specified pair operation status and re-execute iSM13650: Target pair is a member of ATgroup. MV= RV= (code=---< ccc...c>) [Classification] ERROR [Explanation] The specified pair is already registered in the AT-group.
Chapter 2 Message List iSM13651: Target pair is already registered in other ATgroup. MV= RV= (code=---< ccc...c>) iSM13651: Target pair is already registered in specified ATgroup. MV= RV= (code=---< ccc...c>) [Classification] ERROR [Explanation] The specified pair is already registered in another AT-group. A pair cannot be registered in multiple AT-groups at the same time. aaa...a : Volume name bbb...
Chapter 2 Message List iSM13653: Illegal mode type. () (code=---< ccc...c>) [Classification] ERROR [Explanation] The value specified in the mode option of the Restore command is illegal. aaa...a : Specified value bbb...b : Process number ccc…c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a correct value. iSM13654: Illegal rvuse type. () (code=---< ccc...
Chapter 2 Message List iSM13655: Illegal condition type. () (code=---< ccc...c>) [Classification] ERROR [Explanation] The value specified in the cond option of the Wait command is illegal. aaa...a : Specified value bbb...b : Process number ccc…c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a correct value. iSM13656: Illegal value of -interval [second]. () (code=--
Chapter 2 Message List iSM13657: Illegal value of -limit [second]. () (code=---< ccc...c>) [Classification] ERROR [Explanation] The value specified in the limit option of the Wait command is illegal. aaa...a : Specified value bbb...b : Process number ccc…c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a correct value.
Chapter 2 Message List iSM13659: Specified targets are not ready. (code=---< bbb...b>) iSM13659: Specified targets are not available. (code=---< bbb...b>) [Classification] ERROR [Explanation] Specified volume is unavailable. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] The volume is specified under the Read Only, Not Ready, or Not Available status.
Chapter 2 Message List iSM13660: Replicate command has terminated because “activity status” is changed by other process. iSM13660: Replicate command has terminated because “ATgroup Sync State” is changed by other process. (code=---< bbb...b>) [Classification] ERROR [Explanation] Activity status of a pair has changed to status other than Replicate during waiting process for completion of replication.
Chapter 2 Message List iSM13661: Restore command has terminated because “activity status” is changed by other process. iSM13661: Restore command has terminated because “ATgroup Sync State” is changed by other process. (code=---< bbb...b>) [Classification] ERROR [Explanation] Activity status of a pair has changed to status other than Restore during waiting process for completion of restoration. The restore command has terminated waiting for completion of restoration.
Chapter 2 Message List iSM13662: Separate command has terminated because “activity status” is changed by other process. iSM13662: Separate command has terminated because “ATgroup Sync State” is changed by other process. (code=---< bbb...b>) [Classification] [Explanation] ERROR Activity status of a pair has changed to status other than Separate during waiting process for completion of separation. The separate command has terminated waiting for completion of separation.
Chapter 2 Message List iSM13663: The processing of waiting has terminated because “separate diff” or “copy diff” does not decrease in the specified time. ( sec) (code=---< ccc...c>) [Classification] ERROR [Explanation] The waiting process for completion of replication, restoration, or separation has been terminated before completion because the copy difference of the pair or the differential quantity volume of the AT-group did not decrease in the specified time.
Chapter 2 Message List iSM13664: Wait command has terminated because “ATgroup Sync State” is changed by other process. (code=---< bbb...b>) [Classification] ERROR [Explanation] The waiting process for completion of synchronization or separation has been terminated before completion because an error in the AT-group sync state as described below has been detected. - An error has been detected in the link path of the AT-group. Normal link path does not exist any more.
Chapter 2 Message List iSM13669: SnapControl is not installed. (code=---< bbb...b>) [Classification] ERROR [Explanation] SnapControl has not been installed. aaa...a : Process number bbb…b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Install SnapControl. iSM13670: ReplicationControl is not installed. (code=---< bbb...
Chapter 2 Message List iSM13672: DynamicSnapVolume is not supported. (code=---< bbb...b>) [Classification] ERROR [Explanation] DynamicSnapVolume is not supported. aaa...a : Process number bbb…b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check the support state of the disk array. iSM13673: Specified attribute () does not match the attribute of ATgroup. ATG= (code=---< ddd.
Chapter 2 Message List iSM13674: Specified volume is used by snapshot function. : (code=---< ddd...d>) [Classification] ERROR [Explanation] Snapshot operation is taking place in the specified volume. aaa...a : Character string indicating MV or RV MV : MV volume RV : RV volume bbb...b : Volume name (logical disk name) ccc...c : Process number ddd...d : Detail information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13676: Failed to sql server connection. [Classification] ERROR [Explanation] Connection of Microsoft SQL Server 2000 failed. [Measures] Microsoft SQL Server 2000 service may have not started. Check that the service started and retry command execution. Or, if a user ID is specified upon execution of a command, the specified user ID and password are used for connecting to Microsoft SQL Server 2000.
Chapter 2 Message List iSM13679: Illegal remod type. () [Classification] ERROR [Explanation] A value specified for -remod option is invalid. aaa...a [Measures] : Specified value Specify a valid value. iSM13680: Illegal refile name. () [Classification] ERROR [Explanation] A value specified for -refile option is invalid. aaa...a [Measures] : Specified value Specify a valid value. iSM13681: Specified volume differs from database volume. (code=--
Chapter 2 Message List iSM13682: Failed to VDI initialization. [Classification] ERROR [Explanation] Initial process of VDI failed. [Measures] Check that VDI is available in given environment, and then retry command execution. iSM13683: No authority to access database. [Classification] ERROR [Explanation] No authority to access database is given. [Measures] Check that authority to access database is given. Check that database is not under restoration or under verification.
Chapter 2 Message List iSM13686: Failed to metafile () creation. [Classification] ERROR [Explanation] Failed in creating metafile. aaa...a [Measures] : File name Check that specified metafile is correct and retry command execution. iSM13687: Metafile() is not found. [Classification] ERROR [Explanation] Specified metafile is not found. aaa...a [Measures] : File name Check that specified metafile is correct and retry command execution. iSM13688: Failed to metafile(
Chapter 2 Message List iSM13690: Failed to sql command execution. [Classification] ERROR [Explanation] Failed in SQL command. [Measures] Check error log of Microsoft SQL Server 2000, remove cause of fault and then retry command execution. iSM13691: Dbname does not exist in SQL server. [Classification] ERROR [Explanation] Database name does not exist in Microsoft SQL Server 2000. [Measures] Check that database name is correct, and then retry command execution.
Chapter 2 Message List iSM13694: Database () is being used in another process. [Classification] ERROR [Explanation] Database is used by other process. aaa...a [Measures] : Database name Check that other process is not using the database and then retry command execution. iSM13695: Failed to detach database. [Classification] ERROR [Explanation] Detaching database failed. [Measures] Check that detaching database is allowed and then retry command execution.
Chapter 2 Message List iSM13698: Database filename does not exist in metafile. [Classification] ERROR [Explanation] File name of database does not exist in metafile. [Measures] Check that specified file name indicates a physical file of database and then retry command execution. iSM13699: Number of move files are not equal to metafile’s number. [Classification] ERROR [Explanation] The number of files specified by -move option is not the same as the number of files in database.
Chapter 2 Message List iSM13701: ‘R/W permit’ mode cannot be set when state is ‘rpl/sync’, ‘rpl/exec’, ‘rst/sync’, ‘rst/exec’ or ‘sep/exec’. (code=--) [Classification] ERROR [Explanation] R/W Permit mode cannot be specified because the system is under status of replicated, executing replication, restored, executing restoration, or executing separation. aaa...a : Process number bbb...
Chapter 2 Message List iSM13703: Failed to connect iSM/Server. (code=--) [Classification] ERROR [Explanation] Socket connection failed aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check status of iSM server. iSM13704: The unexpected error has occurred in iSM/Server. (code=--
Chapter 2 Message List iSM13706: No more RV can be paired with specified MV. (code=--) [Classification] ERROR [Explanation] Pair setting is unavailable because the number of pairs in specified MV exceeds upper limit. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check status of specified MV, and then specify pairs correctly.
Chapter 2 Message List iSM13709: Conflict of volume list data has been detected. (code=--) [Classification] ERROR [Explanation] Inconsistency was found in volume list. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Create a volume list again. iSM13710: Capacity of specified volumes does not match. (code=--
Chapter 2 Message List iSM13712: Some link paths which belong to specified Disk Array are not normal state. (code=--) [Classification] ERROR [Explanation] An error has been detected in some link paths among disk arrays. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check link path status of disk array. iSM13713: Specified Disk Array is not managed by iSM. (code=-
Chapter 2 Message List iSM13714: Disk Array includes specified volume is not managed by iSM. (code=--) [Classification] ERROR [Explanation] Necessary information could not be obtained because the disk array including the specified volume is not managed by iSM. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check that specified disk array is under management of iSM.
Chapter 2 Message List iSM13717: Control path is not set to iSM/Server. (code=--) [Classification] ERROR [Explanation] I/O path for disk array is not specified to use iSM server (replication management function). aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13720: License for DynamicDataReplication/ RemoteDataReplication is locked. (code=--) [Classification] ERROR [Explanation] License for DynamicDataReplication or RemoteDataReplication is not unlocked. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Unlock the license of disk array. iSM13721: DynamicDataReplication/Remote DataReplication is not supported.
Chapter 2 Message List iSM13723: State of Disk Array includes specified volume is ‘monitoring stop’. (code=--) [Classification] ERROR [Explanation] Monitoring on disk array of specified volume has been stopped. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Start monitoring on disk array. iSM13724: Failed to receive volume information. (code=--
Chapter 2 Message List iSM13725: Disk Arrays can be available to replication does not exist. (code=--) [Classification] ERROR [Explanation] Disk array to be monitored does not exist, or disk array applicable to data replication function does not exist. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check that disk array is monitored, or that data replication function is available.
Chapter 2 Message List iSM13727: Attribute of specified volume is ‘’. : (code=--) [Classification] ERROR [Explanation] The following attributes are added to the specified volume. aaa...a : Volume attribute reserve: Volume with a reserve attribute (registered in a reserve group) bbb...b ccc...
Chapter 2 Message List iSM13729: Failed to execute command. (all of targets) [Classification] ERROR [Explanation] Operations on all pairs failed. [Measures] Check status of pairs with failed operation and then retry command execution. iSM13730: RV of specified pair has already forced to be unpaired. (code=--) [Classification] ERROR [Explanation] RV of specified pair has already been unpaired forcibly. aaa...a : Process number bbb...
Chapter 2 Message List iSM13732: Capacity of license is insufficient. (code=--) [Classification] ERROR [Explanation] Licensed capacity is insufficient. aaa...a : License name in question DynamicDataReplication RemoteDataReplication RemoteDataReplication/DisasterRecovery bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13735: Specified RV has already paired with other volume on same Disk Array as MV. (code=--) [Classification] ERROR [Explanation] Specified RV has already been paired as MV within the same disk. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check status of specified RV and specify pairs correctly.
Chapter 2 Message List iSM13738: Target-control volume list data has invalid data. [Classification] ERROR [Explanation] Target-control list contains invalid information. [Measures] Create a target-control volume list again. iSM13739: Control volume is not found. [Classification] ERROR [Explanation] Control volume is not found. [Measures] Check that control volume definition file is described correctly, and then create a target-control volume list again.
Chapter 2 Message List iSM13741: Failed to create socket. (code=--) [Classification] ERROR [Explanation] Socked creation failed. aaa...a : Process number bbb...b-ccc…c-ddd…d : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] With reference to error number indicated by ddd...d in detailed information, remove cause of error and retry command execution. iSM13742: Failed to send to iSM/Server. (code=-
Chapter 2 Message List iSM13743: Failed to receive from iSM/Server. (code=--) [Classification] ERROR [Explanation] Message reception from iSM server failed. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check status of communication with iSM server. iSM13744: Specified is duplicated. (code=--
Chapter 2 Message List iSM13745: Illegal value of port number. (code=--) [Classification] ERROR [Explanation] Invalid value has been specified for socket port number. aaa...a : Socket port number bbb...b : Process number ccc...c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a correct socket port number. iSM13746: Illegal OS type. (code=--
Chapter 2 Message List iSM13748: Failed to (). drive letter () (code=---) iSM13748: Failed to (). mount point volume () (code=---) [Classification] ERROR [Explanation] Operations on volume failed. aaa...a bbb...
Chapter 2 Message List iSM13749: Volume list data is locked by another process. (code=---< bbb...b>) [Classification] ERROR [Explanation] Volume list data has been created/modified by other process. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] After completion of a process, retry command execution. iSM13750: Volume list data does not exist. (code=---< bbb...
Chapter 2 Message List iSM13751: Volume type is not ld. (code=---< bbb...b>) [Classification] ERROR [Explanation] Specified volume type is not logical disk. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check a specified volume type. Operations linked with replication management allow specifying logical disk name only. iSM13752: Timeout error has occurred in iSM/Server. (code=
Chapter 2 Message List iSM13753: Disconnected from iSM/Server. (code=---< bbb...b>) [Classification] ERROR [Explanation] Connection with iSM server was disconnected. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Operations of iSM server may have stopped. Check status of iSM server. iSM13754: Replication function of iSM/Server is not ready. (code=---< bbb...
Chapter 2 Message List iSM13755: Command issue to failed. (code=---< ccc...c>) [Classification] ERROR [Explanation] Issuing operation command failed. aaa...a : Volume that failed in issuing operation command (MV, RV, or MV/RV) bbb...b : Process number ccc…c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Take measures with reference to a message that was output immediately after this message.
Chapter 2 Message List iSM13762: Illegal svflg type. () (code=---< ccc...c>) [Classification] ERROR [Explanation] Specified SV type is invalid. aaa...a : Specified value bbb...b : Process number ccc...c : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a correct value. iSM13763: SV is omitted. (code=---< bbb...
Chapter 2 Message List iSM13765: Replication and snapshot function are mixed in specified pairs. (code=---< bbb...b>) [Classification] ERROR [Explanation] The data replication function pair and snapshot function pair are both specified. aaa...a : Process number bbb...b : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] The data replication function pair and snapshot function pair cannot be both specified as operation target.
Chapter 2 Message List iSM13767: Illegal volume type is specified. filename= line= (code=---< ddd...d>) [Classification] ERROR [Explanation] Specified volume type is invalid. aaa...a : File name bbb...b : Number of lines ccc...c : Process number ddd...d : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a correct volume type and re-execute. iSM13768: Illegal option value was specified.
Chapter 2 Message List iSM13769: Specified volume does not match the database volume. (code=---< bbb...b>) [Classification] ERROR [Explanation] The volume specified for MV or BV does not match the volume containing the target database. aaa...a : Process number bbb...b : Detail information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13771: Specified volume is under restoration. [BV:] (code=---< ccc...c>) [Classification] ERROR [Explanation] Specified volume is being restored. aaa...a : BV logical disk name bbb...b : Process number ccc...c : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Check the pair status and that restore is completed and re-execute. iSM13772: The volume under deletion exists. [BV:
Chapter 2 Message List iSM13773: Specified volume is linked from LV. [{BV|SV}:] (code=---< ccc...c>) [Classification] ERROR [Explanation] BV or SV is linked to LV. aaa...a : BV or SV logical disk name bbb...b : Process number ccc...c : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Check the pair status, remove the link (unlink), and re-execute. iSM13774: Specified volume is protected by SV guard. [SV:
Chapter 2 Message List iSM13775: Deleting snapshot has terminated because "Snap State" is changed by other process. (code=---< bbb...b>) [Classification] ERROR [Explanation] Processing has terminated because the snapshot activity state changed from the deletion state (snap/deleting) during snapshot deletion. aaa...a : Process number bbb...b : Detail information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13777: The volume linked from LV exists. [BV:] (code=---< ccc...c>) [Classification] ERROR [Explanation] Some SV paired with BV are linked. aaa...a : BV logical disk name bbb...b : Process number ccc...c : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Check the pair status, remove the link connection to the volume (unlink), and re-execute. iSM13778: The volume of SV guard exists.
Chapter 2 Message List iSM13779: Function error has occurred. function= retcode= (code=---< ddd...d>) [Classification] ERROR [Explanation] A function error has occurred. aaa...a : Name of function in which an error occurred bbb...b : Code value returned by the function (refer to the table below) Code Explanation value 40 Failed in locking the volume. 41 Failed in unlocking the volume. 42 Failed in mounting the volume.
Chapter 2 Message List iSM13780: Specified volume is used by replication function. BV: (code=---< ccc...c>) [Classification] ERROR [Explanation] Replication is taking place in the specified BV. aaa...a : BV logical disk name bbb...b : Process number ccc...c : Detail information (This code is not disorder reason but a value for maintenance.) [Measures] Check the replication status of specified BV and re-execute. iSM13800: No such database name. filename=
Chapter 2 Message List iSM13801: Illegal Option type is specified. filename= line= (code=---< ddd...d>) [Classification] ERROR [Explanation] Invalid value was specified for option type in database operation file. aaa...a : File name bbb...b : Number of lines ccc…c : Process number ddd…d : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a correct value for option type.
Chapter 2 Message List iSM13803: User id is too long. filename= line= (code=---< ddd...d>) [Classification] ERROR [Explanation] User ID specified in database operation file is too long. aaa...a : File name bbb...b : Number of lines ccc…c : Process number ddd…d : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a user ID within 64 characters (1-byte). iSM13804: Password is too long.
Chapter 2 Message List iSM13805: Server name is too long. filename= line= (code=---< ddd...d>) [Classification] ERROR [Explanation] “computer name\instance name” specified in database operation file is too long. aaa...a : File name bbb...b : Number of lines ccc…c : Process number ddd…d : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13807: Description name is too long. filename= line= (code=---< ddd...d>) [Classification] ERROR [Explanation] Description for the backup set specified in database operation file is too long. aaa...a : File name bbb...b : Number of lines ccc…c : Process number ddd…d : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13809: Refile name is too long. filename= line= (code=---< ddd...d>) [Classification] ERROR [Explanation] Standby database file name specified in database operation file is too long. aaa...a : File name bbb...b : Number of lines ccc…c : Process number ddd…d : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify standby database file name within 256 characters (1-byte).
Chapter 2 Message List iSM13811: OS file name is too long. filename= line= (code=---< ddd...d>) [Classification] ERROR [Explanation] Physical file name for -move option specified in database operation file is too long. aaa...a : File name bbb...b : Number of lines ccc…c : Process number ddd…d : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13813: Options “pass” can not be omitted are specified. filename= line= (code=---< ddd...d>) [Classification] ERROR [Explanation] Option “pass” has been omitted in file setting of database operation file. aaa...a : File name bbb...b : Number of lines ccc…c : Process number ddd…d : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13815: Options “uid” can not be omitted are specified. filename= line= (code=---< ddd...d>) [Classification] ERROR [Explanation] Option “uid” has been omitted in database operation file. aaa...a : File name bbb...b : Number of lines ccc…c : Process number ddd…d : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify “uid” option also when specifying “pass” option.
Chapter 2 Message List iSM13817: Specified database name is duplicated. filename= line= (code=---< ddd...d>) [Classification] ERROR [Explanation] Specified database overlaps in database operation file. aaa...a : File name bbb...b : Number of lines ccc…c : Process number ddd…d : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a database uniquely. iSM13818: Failed to metafolder (
Chapter 2 Message List iSM13819: Insufficient database. () (code=---< ccc...c>) [Classification] ERROR [Explanation] Database that has not been specified exists. aaa...a : Specified value bbb...b : Process number ccc…c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify all databases in volume. iSM13820: Illegal server name. () (code=---< ccc...
Chapter 2 Message List iSM13821: Illegal server name. () filename= line= (code=---< eee...e>) [Classification] ERROR [Explanation] Value specified by “-server” option is invalid. aaa...a : Server name bbb...b : File name ccc...c : Number of lines ddd...d : Process number eee…e : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13823: No authority to access SQL server. (code=---< bbb...b>) [Classification] ERROR [Explanation] Access to Microsoft SQL Server 2000 is not authorized. aaa...a : Process number bbb…b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check that access to Microsoft SQL Server 2000 is authorized. iSM13824: Illegal SQL server version. (code=---< bbb...
Chapter 2 Message List iSM13825: Specified iopath is not supported. (code=---< bbb...b>) [Classification] ERROR [Explanation] The requested function is not available under the specified I/O issue control that is currently enabled. I/O issue path control must be specified, or the setting must be changed. aaa...a : Process number bbb...b : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM13827: User id is too long. (code=---< bbb...b>) [Classification] ERROR [Explanation] User ID is too long. aaa...a : Process number bbb…b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify user ID within 64 characters (1-byte). iSM13828: Password is too long. (code=---< bbb...b>) [Classification] ERROR [Explanation] Password is too long. aaa...
Chapter 2 Message List iSM13829: Server name is too long. (code=---< bbb...b>) [Classification] ERROR [Explanation] “computer name\instance name” is too long. aaa...a : Process number bbb…b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify a computer name within 255 characters (1-byte), and specify an instance name within 16 characters (1-byte). iSM13830: Refile name is too long. (code=--
Chapter 2 Message List iSM13831: Database already exist. () (code=---< ccc...c>) [Classification] ERROR [Explanation] Specified database already exists. aaa...a : Database name bbb...b : Process number ccc…c : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Detach specified database, and execute SQL command again. iSM13832: Database name is too long. (code=---< bbb...
Chapter 2 Message List iSM13833: Database operation file name is too long. (code=---< bbb...b>) [Classification] ERROR [Explanation] Specified database operation file name is too long. aaa...a : Process number bbb…b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify database operation file name within 128 characters (1-byte). iSM13834: Metafile name is too long. (code=---< bbb...
Chapter 2 Message List iSM13835: Metafolder name is too long. (code=---< bbb...b>) [Classification] ERROR [Explanation] Specified metafile storing folder name is too long. aaa...a : Process number bbb…b : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify metafile storing folder name within 256 characters (1-byte). iSM13836: Number of database exceeds the limit that can be specified. (code=--
Chapter 2 Message List iSM14000 ∼ iSM14400: Information sense error : info=, status=failed () [Classification] INFO [Explanation] It indicates that it failed in acquiring Disk Array information. [Measures] aaa...a : Command name bbb...b : Detail of error If an error occurred (status=failed was output), configuration or settings of disk array may have been changed. After updating it to the newest information or restarting state monitoring, check current state and execute again.
Chapter 2 Message List iSM14402: Configuration released. : Disk Array=, status= [Classification] INFO [Explanation] It indicates that configuration setting completed. aaa...a : Disk array name bbb...b : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] An error may have occurred on the disk array or the control path.
Chapter 2 Message List iSM14404: LD unbind : LDN=h, h..., status= [Classification] INFO [Explanation] It indicates that the unbinding of Logical Disk was executed. aaaa : Logical disk number bbb...b : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14406: RANK unbind : RANK=h, h..., PDG=h, status= [Classification] INFO [Explanation] It indicates that the unbinding of RANK was executed. aa : RANK number bb : PD group number ccc...c : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14408: SPARE bind : PDN=h, h..., PDG=h, status= [Classification] INFO [Explanation] It indicates that the binding of SPARE was executed. aa : Physical disk number bb : PD group number ccc...c : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14410: Set ownership : LDN=h, h..., , status= [Classification] INFO [Explanation] It indicates that the ownership of Logical Disk was set. aaaa : Logical disk number bbbb : Controller on which the ownership to be set (CNT0 or CNT1) ccc...c : Execution state of the command.
Chapter 2 Message List iSM14412: Set Disk Array time : , Disk Array=, status= [Classification] INFO [Explanation] It indicates that the date and time in the Disk Array was set. aaa...a : date, time. Example (Thu May 24 14:03:01 JST 2001) bbb...b : Target disk array name ccc...c : Execution state of the command.
Chapter 2 Message List iSM14414: Forced Reduce(maintenance) : RANK=h, PDN=h, PDG=h, status= [Classification] INFO [Explanation] It indicates that forced reduce was instructed to specified physical disk. aa : RANK number bb : Physical disk number cc : PD group number ddd...d : Execution state of the command.
Chapter 2 Message List iSM14416: SPARE Rebuild(maintenance) : RANK=h, PDN=h, PDG=h, Time=- , status= [Classification] INFO [Explanation] It indicates that start of rebuilding using SPARE was instructed to specified physical disk. aa : RANK number bb : Physical disk number cc : PD group number dd : Rebuild time eee...e : Execution state of the command.
Chapter 2 Message List iSM14418: Auto repair mode : mode=, status= [Classification] INFO [Explanation] It indicates that ON/OFF of the auto repair was set. aaa : on, off bbb...b : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14420: FW download(maintenance) : resource=, PDG=h, number=h, h..., status= [Classification] INFO [Explanation] It indicates that firmware downloading was executed. aa bb : Subjected resource PD : Physical disk HD : Host director DE : Disk enclosure SVP : Service processor : PD group number (Valid only when the subjected resource is a PD.) cc : Resource number or all ddd...d : Execution state of the command.
Chapter 2 Message List iSM14422: Media error list init(maintenance) : RANK=h, PDG=h, status= [Classification] INFO [Explanation] It indicates that the Media error list within Disk Array was initialized. aa : RANK number bb : PD group number ccc...c : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14424: Set SPARE mode : mode=, status= [Classification] INFO [Explanation] It indicates that ON/OFF of data rewrite at failure recovery was set. aaa : on, off bbb...b : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14426: RANK rebuild time : RANK=h, PDG=h, Time=, status= [Classification] INFO [Explanation] It indicates that RANK rebuild time was changed. aa : RANK number bb : PD group number cc : Rebuild time ddd...d : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14428: Auto assignment mode: mode=, status= [Classification] INFO [Explanation] It indicates that auto assignment mode was set. aaa : on, off bbb...b : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14430: Set LD reserve ( ): LDN=h, h..., status= [Classification] INFO [Explanation] It indicates that the logical disk was set to the reserve group. aaaa : Logical disk number bbb...b : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14432: Start data initialize : LDN=h, h..., status= [Classification] INFO [Explanation] It indicates that initialization of the logical disk began. aaaa : Logical disk number bbb...b : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14434: Change data initialize time : Time=, status= [Classification] INFO [Explanation] It indicates that logical disk initialization time was changed. aa : Initialization time bbb...b : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14436: Cancel LD reserve (optimization) : LDN=h, h..., status= [Classification] INFO [Explanation] It indicates that the logical disk was released from the work disk for optimization. aaaa : Logical disk number bbb...b : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14438: Set Port Platform : Platform=, HD=h, Port=h, status= [Classification] INFO [Explanation] The OS type of the port has been set. aa : Set platform bb : Host director number cc : Port number ddd...d : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14440: Control Software update : status=failed [Classification] INFO [Explanation] Indicates failure in updating storage control software. aaa : Subjected resource HD : Host director DD : Disk director SVP : Service processor [Measures] The configuration or setting of the disk array may be changed. After updating it to the newest information or restarting state monitoring, check current state and execute again.
Chapter 2 Message List iSM14442: Reset resource : resource=, number=h, status= [Classification] INFO [Explanation] It indicates that resetting of resource or disk array started. aaa bb : Subjected resource SVP : Service processor all : Whole disk array : Resource number applicable to resetting (all for the whole disk array) ccc...
Chapter 2 Message List iSM14443: Set IP Address : number=h, (IP Address=, Subnet Mask=, Gateway Address=) -> (IP Address=, Subnet Mask=, Gateway Address=), status= [Classification] INFO [Explanation] It indicates that IP address, subnet mask, and gateway address have been specified for the disk array. Information specified here becomes valid after resetting disk array or service processor. aa : Service processor number bbb...
Chapter 2 Message List iSM14444: Set SCSI Socket permission : number=h, SCSI Socket Guard Invalid=, SCSI Socket Valid IP Address=,..., status= [Classification] INFO [Explanation] Indicates access restriction has been specified on monitoring server. Information specified here becomes valid after resetting disk array or service processor. aa : Service processor number bbb : Access restriction status on monitoring server (on or off) ccc...
Chapter 2 Message List iSM14445: Set SNMP Request permission : number=h, SNMP Valid=, Community Name=“”, SNMP Valid IP Address=, ..., status= [Classification] INFO [Explanation] Indicates access restriction has been specified by SNMP request. Information specified here becomes valid after resetting disk array or service processor. aa : Service processor number bb : Access restriction status by SNMP request (on or off) ccc...c : Community name ddd...
Chapter 2 Message List iSM14446: LD Bind(maintenance) : LDN=h, h..., RANK=h, PDG=h, status= [Classification] INFO [Explanation] It indicates that logical disks have been configured. After normal operation, iSM14410 message is output also. aaaa : Logical disk number bb : RANK number cc : PD group number ddd...
Chapter 2 Message List iSM14448: Set SNMP Trap Transmission : number=h, Community Name=“”, SNMP Trap IP Address=,,..., status= [Classification] INFO [Explanation] It indicates that sending destination of SNMP trap was specified. Information specified here becomes valid after resetting disk array or service processor. aa : Service processor number bbb...b : Community name ccc...c : IP address of SNMP Trap sending destination ddd...
Chapter 2 Message List iSM14449: Set SNMP Trap Information : number=h, Trap Sense Interval=, Unit Contact=“”, Unit Name=“”, Unit Location=“”, Unit Info=“”, status= [Classification] INFO [Explanation] It indicates that SNMP trap information was specified. Information specified here becomes valid after resetting disk array or service processor. aa : Service processor number bb : Trap monitoring interval (unit: second) ccc...
Chapter 2 Message List iSM14450: Set CachePartitioning mode: mode= initialize=, status= [Classification] INFO [Explanation] It indicates that the cache partitioning function has started/stopped. aaa : Cache partitioning function starting/termination (on or off) bbbb : Initial status of settings at cache partitioning function starting (on, off, or “----”) ccc...
Chapter 2 Message List iSM14451: Define cache segment : segment number=h, segment name=“”, max. capacity=GB, min. capacity=GB, status= [Classification] INFO [Explanation] It indicates that the cache segment has been created. aa : Cache segment number bbb...b : Cache segment name ccc...c : Max. allocated cache capacity ddd...d : Min. allocated cache capacity eee...
Chapter 2 Message List iSM14452: Delete cache segment : segment number=h, segment name=“”, status= [Classification] INFO [Explanation] It indicates that the cache segment has been deleted. aa : Cache segment number bbb...b : Cache segment name ccc...c : Command execution status good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs (status=failed was output), the configuration or setting of the disk array may be changed.
Chapter 2 Message List iSM14453: Set cache segment information: segment number=h, segment name=“”, max. capacity=GB, min. capacity=GB, status= [Classification] INFO [Explanation] It indicates that the cache segment information has been changed. aa : Cache segment number bbb...b : Cache segment name ccc...c : Max. allocated cache capacity ddd...d : Min. allocated cache capacity eee...
Chapter 2 Message List iSM14454: Assign LD to cache segment : segment number=h, segment name=“”, LDN=, ..., status= [Classification] INFO [Explanation] It indicates that LD assigned to cache segment has been changed. aa : Number of cache segment to which LD was added bbb...b : Name of cache segment to which LD was added ccc...c : LD number of which LD assignment has been changed ddd...
Chapter 2 Message List iSM14456: Pool bind : Pool number=h, Type=, PD count=, PDN=- h-h,
- h-h, ..., Time=, RAID=, status= [Classification] INFO [Explanation] It indicates that pool bind has been executed. aaaa : Pool number bbb...b : Pool type dynamic : Dynamic basic : Basic cccc : Number of physical disks dd : PD group number ee : Physical disk number ff : Rebuild time ggg...g : RAID type hhh...
Chapter 2 Message List iSM14457: Pool unbind : Pool number=h, PD count=, PDN=h-- h, h-
- h, ..., status= [Classification] INFO [Explanation] It indicates that pool unbind has been executed. aaaa : Pool number bbbb : Number of physical disks cc : PD group number dd : Physical disk number eee...
Chapter 2 Message List iSM14458: Pool expansion : Pool number=h, PD count=, PDN=h-- h, h-
- h, ..., restruct=, Time=, status= [Classification] INFO [Explanation] It indicates that pool expansion has been executed. aaaa : Pool number bbbb : Number of physical disks cc : PD group number dd : Physical disk number eee : Rebuilding on : With pool rebuilding off : Without pool rebuilding fff : Expansion time ggg...
Chapter 2 Message List iSM14459: Pool rebuild/expansion time : Pool number=h, rebuild time=, expansion time=, status= [Classification] INFO [Explanation] It indicates that the pool expansion time has been changed. aaaa : Pool number bb : Rebuild time ccc : Expansion time ddd...
Chapter 2 Message List iSM14461: LD bind : LDN=h, h..., Pool number=h, LD capacity=GB, Time=- , status= [Classification] INFO [Explanation] It indicates that LD bind has been executed. aaaa : Logical disk number bbbb : Pool number ccc...c : Logical disk capacity dd : Binding time eee...
Chapter 2 Message List iSM14462: LD expansion : LDN=h, LD capacity=GB, Time=, status= [Classification] INFO [Explanation] It indicates that LD expansion has been executed. aaaa : Logical disk number bbb...b : Logical disk capacity (after expansion) cc : Expansion time ddd...
Chapter 2 Message List iSM14467: SRA expansion : LD(SDV) number=h,h..., Pool number=h, SRA capacity=GB, threshold=GB(%), status= [Classification] INFO [Explanation] It indicates that SRA was expanded. [Measures] aaaa : Logical disk (SDV) number bbbb : Pool number ccc...c : SRA capacity (GB) ddd...d : Threshold (GB) ee : Threshold (%) fff...f : Execution state of the command.
Chapter 2 Message List iSM14468: SRA bind : LD(SDV) number=h,h..., Pool number=h, SRA capacity=GB, threshold=GB(%), status= [Classification] INFO [Explanation] It indicates that SRA was bound. [Measures] aaaa : Logical disk (SDV) number bbbb : Pool number ccc...c : SRA capacity (GB) ddd...d : Threshold (GB) ee : Threshold (%) fff...f : Execution state of the command.
Chapter 2 Message List iSM14469: LV bind : LD(LV) number=h,h...(LD(BV) number=h,h...), Pool number=h, status= [Classification] INFO [Explanation] It indicates that LV was bound. [Measures] aaaa : Logical disk (LV) number bbbb : Logical disk (BV) number permitted to be linked cccc : Pool number ddd...d : Execution state of the command.
Chapter 2 Message List iSM14470: SV bind : LD(SV) number=h,h...(LD(BV) number=h), Pool number=h, SV count=- , status= [Classification] INFO [Explanation] It indicates that a generation was added (SV was bound). [Measures] aaaa : Logical disk (SV) number bbbb : Number of logical disk (BV) to which the generation is added cccc : Pool number dd : Number of generations to be added eee...e : Execution state of the command.
Chapter 2 Message List iSM14471: SRA unbind : Pool number=h, LD(SDV) number=h,h..., status= [Classification] INFO [Explanation] It indicates that SRA was unbound. [Measures] aaaa : Pool number bbbb : Logical disk (SDV) number ccc...c : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) When an error occurs (status=failed was output), restart state monitoring and check the following items.
Chapter 2 Message List iSM14472: SV unbind : LD(SV) number=h,h...(LD(BV) number=h), SV count=, status= [Classification] INFO [Explanation] It indicates that a generation was removed (SV was unbound). aaaa : Logical disk (SV) number bbbb : Number of logical disk (BV) from which the generation is removed [Measures] cc : Number of generations to be removed ddd...d : Execution state of the command.
Chapter 2 Message List iSM14474: SRA threshold : Pool number=h, threshold=GB (%), status= [Classification] INFO [Explanation] It indicates that threshold was changed. [Measures] aaaa : Pool number bbb...b : Threshold (GB) cc : Threshold (%) ddd...d : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) When an error occurs (status=failed was output), restart state monitoring and check the following items.
Chapter 2 Message List iSM14476: Configuration released(reference mode).: Disk Array=, status= [Classification] INFO [Explanation] It indicates that the reference mode of configuration setting is ended. [Measures] aaa...a : Disk array name bbb...b : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) When an error occurs (status=failed was output), the disk array or control path may be failed.
Chapter 2 Message List iSM14601: Forced termination : status= [Classification] INFO [Explanation] It indicates that the “Configurating” state was forcefully canceled. aaa...a : Execution state of the command. good : Normal failed(xxxx) : Error occurred (xxxx is error description) [Measures] When an error occurs, check whether any abnormality has occurred in the processes making up the iSM server or in the operation environment, then restart the iSM server.
Chapter 2 Message List iSM15000 ∼ iSM15600: Internal error : detail=, code= [Classification] INFO [Explanation] It indicates that such internal error as communication error and system call error occurred. aaa...a : The following output will be provided depending on an error content.
Chapter 2 Message List iSM16000 ~ iSM16001: iSMalived process has started. function= AUTH= [Classification] INFO [Explanation] It indicates that ALIVEmail process has started. aaa...a : Function name that has started SG Error : Process has started, but notification is not executed because of SG setting error (function blockage state). Alert : Error report Heartbeat : Heartbeat report Regulary : Periodical error report RunningMainte : Scheduled maintenance report bbb...
Chapter 2 Message List iSM16021: Internal Error has occurred. code= errno= [Classification] NOTICE [Explanation] It shows that an internal error has occurred. [Measures] aaaa : Internal code bbb : Error number Check the server operating environment and various settings. iSM16029: File does not exist. file= [Classification] WARNING [Explanation] It shows that ALIVEmail setting file or message information table file does not exist. aaa...a [Measures] : File name alived.
Chapter 2 Message List iSM16030: File cannot be opened. errno= file= [Classification] WARNING [Explanation] It shows that opening of the ALIVEmail setting file or message information table file has failed. [Measures] aaa : Error number bbb...b : File name alived.conf : Setting file alived.tbl : Message information table file alived.hst : Record file Check the conditions of the ALIVEmail setting file or message information table file. iSM16031: File cannot be read. file=alived.
Chapter 2 Message List iSM16033: Illegal configuration. file=alived.conf Tag overlaps. line= tag= [Classification] WARNING [Explanation] It indicates that the tags overlap in the ALIVEmail setting file. [Measures] aa : Error line number bbb...b : Tag name Check the syntax of the ALIVEmail setting file and correct it. iSM16034: Illegal configuration. file=alived.conf First word is not keyword.
Chapter 2 Message List iSM16035: Illegal configuration. file=alived.conf id= line= [Classification] WARNING [Explanation] It indicates that there is Invalid description in the ALIVEmail setting file.
Chapter 2 Message List iSM16038: Illegal configuration. file=alived.conf It has exceeded 256 bytes. line= [Classification] WARNING [Explanation] It indicates that the applicable line of the ALIVEmail setting file exceeds 256 bytes. aa [Measures] : Error line number Check the applicable line of the ALIVEmail setting file, and correct it 256 bytes or less. iSM16039: Illegal configuration. file=alived.conf “TO” mail address has exceeded 10.
Chapter 2 Message List iSM16043: Illegal configuration. file=alived.tbl Tag overlaps. line= tag= [Classification] WARNING [Explanation] It indicates that the tags overlap in the ALIVEmail message information table file. [Measures] aa : Error line number bbb...b : Tag name Check the syntax of the ALIVEmail message information table file and correct it. iSM16044: Illegal configuration. file=alived.tbl First word not keyword.
Chapter 2 Message List iSM16045: Illegal configuration. file=alived.tbl id= line= [Classification] WARNING [Explanation] It indicates that there is Invalid description in the ALIVEmail message information table file. a : Error classification 1: Improper position of “=”, or no “=” 5: Improper position of “,” 8: No description of address bb [Measures] : Error line number Check the relevant line of the ALIVEmail message information table file, and correct the definition.
Chapter 2 Message List iSM16048: Illegal configuration. file=alived.tbl It has exceeded 256 bytes. line= [Classification] WARNING [Explanation] It indicates that the applicable line of the ALIVEmail message information table file exceeds 256 bytes. aa [Measures] : Error line number Check the applicable line of the ALIVEmail message information table file, and correct it in 256 bytes or less. iSM16049: Illegal configuration. file=alived.tbl Message number has exceeded 1000.
Chapter 2 Message List iSM16062: Mail server cannot be connected. name= code= errno= [Classification] WARNING [Explanation] It indicates that the connection to mail server has failed. [Measures] aaa...a : Function name bbbb : Internal code ccc : Error number Failed in connection with mail server specified in the ALIVEmail setting file. Check the address and operations of the specified mail server. iSM16063: Communication error(receive from mail server). name=
Chapter 2 Message List iSM16064: Communication error(send to mail server). name= code= errno= [Classification] WARNING [Explanation] It indicates that transmitting to mail server has failed. [Measures] aaa...a : Function name bbbb : Internal code ccc : Error number Check the operations of the specified mail server, and resolve the problem. iSM16065: Communication error(mail server). id= send= recv=
Chapter 2 Message List iSM16070: Message buffer is full. Data losing is detected. [Classification] WARNING [Explanation] It indicates that messages have been deleted because the message buffer capacity exceeded the limit. [Measures] There are too many messages for link. Definition must be reviewed. iSM16071: Data losing is recovered. [Classification] WARNING [Explanation] It indicates that the message lost by the overflow of message buffer has been recovered.
Chapter 2 Message List iSM16080: Definition change is successful. function= AUTH= [Classification] INFO [Explanation] It indicates that the setting information change was successful. aaa...a : Function name that has started Alert : Error report Heartbeat : Heartbeat report Regulary : Periodical error report RunningMainte : Scheduled maintenance report bbb...
Chapter 2 Message List iSM16082: Definition change error. ALIVEmail function continues to operate by old one. [Classification] WARNING [Explanation] The setting file change was failed. The driven function operates by the old function before changing. [Measures] While trying to change the setting information with the iSM server running, the definition error occurred. Correct the setting information error and execute the change command again. iSM16083: Making of file directory error.
Chapter 2 Message List iSM17000 ∼ iSM17001: Ftp environment(user) is not defined. File Transfer function can not be used. detail= [Classification] NOTICE [Explanation] File transfer function cannot be used because FTP user name has not been defined. aa-bbbb : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Specify correct description of file_transfer section (user) in environment definition file, and restart the iSM server.
Chapter 2 Message List iSM17003: Ftp environment(temp_directory) is invalid. File Transfer function can not be used. detail= [Classification] NOTICE [Explanation] File transfer function cannot be used because work file storing directory has not been defined correctly. aa-bbbb : Detailed information (This code is not disorder reason but a value for maintenance.
Chapter 2 Message List iSM17010: File access has failed. func= path= errno= detail= [Classification] NOTICE [Explanation] An error occurred in file access function. aaa...a : Function name bbb...b : Path name ccc : Error number dd-eeee : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check function name and error number, take appropriate measures, and restart the iSM server. iSM17020: Socket access has failed.
Chapter 2 Message List iSM17030: Memory access has failed. func= errno= detail= [Classification] WARNING [Explanation] An error occurred in memory access function. iSM server terminates abnormally. aaa...a : Function name bbb : Error number cc-dddd : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Check function name and error number, take appropriate measures, and restart the iSM server.
Chapter 2 Message List iSM17050: Internal error has occurred. detail= [Classification] WARNING [Explanation] An internal error occurred in file transfer function. iSM server terminates abnormally. aa-bbbb : Detailed information (This code is not disorder reason but a value for maintenance.) [Measures] Save the following information and restart the iSM server.
Chapter 2 Message List iSM18000 ∼ iSM18001: Snapshot has been created. (, BV= (h), SV= (h)) [Classification] INFO [Explanation] It indicates that snapshot was created. [Measures] aaa...a : Disk array name bbb...b : BV logical disk name cccc : BV logical disk number ddd...d : SV logical disk name eeee : SV logical disk number Unnecessary iSM18002: Deleting snapshot has been started. (, BV= (h), SV=
Chapter 2 Message List iSM18003: Snapshot has been deleted. (, BV= (h), SV= (h)) [Classification] INFO [Explanation] It indicates that snapshot deletion was completed. [Measures] aaa...a : Disk array name bbb...b : BV logical disk name cccc : BV logical disk number ddd...d : SV logical disk name eeee : SV logical disk number Unnecessary iSM18004: Restoring snapshot has been started. (, BV= (h), SV=
Chapter 2 Message List iSM18005: Snapshot has been restored. (, BV= (h), SV= (h)) [Classification] INFO [Explanation] It indicates that snapshot restoring was completed. [Measures] aaa...a : Disk array name bbb...b : BV logical disk name cccc : BV logical disk number ddd...d : SV logical disk name eeee : SV logical disk number Unnecessary iSM18006: SV guard was changed. (, SV=
Chapter 2 Message List iSM18007: Snapshot was cancelled. (, BV= (h), SV= (h), generation=) [Classification] ERROR [Explanation] It indicates that snapshot was cancelled due to insufficient capacity of snapshot reserve area or other cause. Snapshot data is no longer accessible once snapshot is cancelled. For Windows, this message is target of ESMPRO Manager Report. [Measures] aaa...a : Disk array name bbb...
Chapter 2 Message List iSM18008: Snapshot was nullified. (, BV= (h), SV= (h), generation=) [Classification] NOTICE [Explanation] It indicates that snapshot was nullified because an old snapshot is restored. Snapshot data is no longer accessible once snapshot is nullified. [Measures] aaa...a : Disk array name bbb...b : BV logical disk name cccc : BV logical disk number ddd...
Chapter 2 Message List iSM18202: Failed to delete snapshot. (, BV= (h), SV= (h), generation=, code=) [Classification] WARNING [Explanation] It indicates that snapshot deletion failed. [Measures] aaa...a : Disk array name bbb...b : BV logical disk name cccc : BV logical disk number ddd...d : SV logical disk name eeee : SV logical disk number fff : SV generation number ggg...
Chapter 2 Message List iSM18204: Failed to change SV guard of snapshot-volume. (, SV= (h), code=) [Classification] WARNING [Explanation] It indicates that the protection mode of snapshot-volume cannot be changed. [Measures] aaa...a : Disk array name bbb...b : SV logical disk name cccc : SV logical disk number ddd...
Chapter 2 Message List iSM18301: System call error has occurred. (func=, code=, errno=) [Classification] ERROR [Explanation] It indicates that a system call error has occurred. [Measures] aaa...a : Abnormally terminated function name bbb...b : Internal error code indicating the type of abnormal state cccc : Error number Take necessary measures by checking the function name and error number and restart the iSM server. iSM18302: Internal error has occurred. (code=
Chapter 2 Message List iSM18311: Internal communication error has occurred. (code=) [Classification] ERROR [Explanation] In indicates that an internal communication error has occurred. aaa...a [Measures] : Internal error code indicating the type of abnormal state Collect necessary information according to the iSM error information collection procedure, and restart the iSM server. iSM18321: Access to diskarray was failed. (, code=,
Chapter 2 Message List iSM18501: Access mode was changed. (, LD= (h), mode from to ) [Classification] INFO [Explanation] It indicates that the volume access mode was changed. [Measures] aaa...a : Disk array name bbb...b : Logical disk name cccc : Logical disk number ddd...d : Access mode before change eee...e : Access mode after change Unnecessary iSM18502: Logical disk was linked to link-volume.(,LV=(( h), LD=(
Chapter 2 Message List iSM18503: Logical disk was unlinked from link-volume.(,LV=(< cccc>h), LD=(h)) [Classification] INFO [Explanation] It indicates that the volume was unlinked from the link-volume. [Measures] aaa...a : Disk array name bbb...b : Logical disk name of link-volume cccc : Logical disk number of link-volume ddd...
Chapter 2 Message List iSM18602: Failed to link logical disk to link-volume.(,LV=(< cccc>h), LD=(h),code=) [Classification] WARNING [Explanation] It indicates that the volume cannot be linked to the link-volume. [Measures] aaa...a : Disk array name bbb...b : Logical disk name of link-volume cccc : Logical disk number of link-volume ddd...d : Logical disk name of destination-volume eeee : Logical disk number of destination-volume fff...
Chapter 2 Message List iSM18999: Unexpected error has occurred. (code=) [Classification] WARNING [Explanation] In indicates that an unexpected error has occurred. aaa...a [Measures] : Error code indicating the type of abnormal state Collect necessary information according to the iSM error information collection procedure, and restart the iSM server.
Chapter 2 Message List iSM19000 ∼ iSM19000: [Classification] INFO [Explanation] Executed command line. aaa...a [Measures] : Entered character string Unnecessary iSM19010: iSMsc_create has normally terminated. [Classification] INFO [Explanation] iSMsc_create command normal termination message. [Measures] Unnecessary iSM19011: iSMsc_create has normally terminated. [BV:] [SV:] [Classification] INFO [Explanation] iSMsc_create command normal termination message.
Chapter 2 Message List iSM19013: iSMsc_create has abnormally terminated. [BV:] [SV:] [Classification] INFO [Explanation] iSMsc_create command abnormal termination message. [Measures] aaa...a : Volume name bbb...b : Volume name Check the message displayed immediately before to handle it. iSM19020: iSMsc_delete has normally terminated. [Classification] INFO [Explanation] iSMsc_delete command normal termination message.
Chapter 2 Message List iSM19022: iSMsc_delete has abnormally terminated. [Classification] INFO [Explanation] iSMsc_delete command abnormal termination message. [Measures] Check the message displayed immediately before to handle it. iSM19023: iSMsc_delete has abnormally terminated. [BV:] [SV:] [Classification] INFO [Explanation] iSMsc_delete command abnormal termination message. [Measures] aaa...a : Volume name bbb...
Chapter 2 Message List iSM19031: iSMsc_restore has normally terminated. [BV:] [SV:] [Classification] INFO [Explanation] iSMsc_restore command normal termination message. [Measures] aaa...a : Volume name bbb...b : Volume name Unnecessary iSM19032: iSMsc_restore has abnormally terminated. [Classification] INFO [Explanation] iSMsc_Restore command abnormal termination message. [Measures] Check the message displayed immediately before to handle it.
Chapter 2 Message List iSM19034: iSMsc_restore has accepted the request. [Classification] INFO [Explanation] It indicates that the iSMsc_restore command has accepted the request. [Measures] Unnecessary iSM19035: iSMsc_restore has accepted the request. [BV:] [SV:] [Classification] INFO [Explanation] It indicates that the iSMsc_restore command has accepted the request. [Measures] aaa...a : Volume name bbb...
Chapter 2 Message List iSM19101: The volume linked from LV cannot be specified. [{BV|SV}:] [Classification] ERROR [Explanation] It indicates that the request cannot be accepted because BV or SV is linked to LV. aaa...a [Measures] : Volume name Remove the link (unlink) with the iSMcc_unlink command and re-execute. iSM19102: The volume mounted cannot be specified. [BV:
Chapter 2 Message List iSM19104: The volume is not paired cannot be specified. [BV:] [SV:] [Classification] ERROR [Explanation] It indicates that the request cannot be accepted because the specified volume has no pair setting. [Measures] aaa...a : Volume name bbb...b : Volume name Check the volume and re-execute. iSM19105: State of specified pair is invalid. (state=) [BV:] [SV:] [Classification] ERROR [Explanation] Target pair status is invalid.
Chapter 2 Message List iSM19107: State of SV's access mode is invalid. (mode=) [SV:] [Classification] ERROR [Explanation] The command cannot be executed because the SV access restriction is not "Not Ready". aaa...a bbb...b [Measures] : SV access restriction rw : Input/output allowed ro : Read only na : Access prohibited : Volume name Check the access mode and re-execute. iSM19108: The volume under deletion exists. [BV:
Chapter 2 Message List iSM19110: The volume of SV guard exists. [SV:] [Classification] ERROR [Explanation] It indicates that the request cannot be accepted because BV contains protected SV. aaa...a [Measures] : Logical disk name of relevant volume Deactivate the protection for relevant volume and re-execute. iSM19111: Version of API is invalid. [Classification] ERROR [Explanation] API version is invalid. [Measures] Use the API with the correct version.
Chapter 2 Message List iSM19113: Volume list does not exist. [Classification] ERROR [Explanation] Volume list is invalid. Or, the volume list version is not correct. [Measures] Re-create the volume list. iSM19114: License for snapshot is locked. [Classification] ERROR [Explanation] The snapshot product has not been purchased. [Measures] Purchase the product to perform snapshot operation. iSM19115: Snapshot function is not supported with this volume.
Chapter 2 Message List iSM19117: Specified drive type is not supported.(type=) [Classification] ERROR [Explanation] Specified drive type is not supported. This message is output on Windows system. aaa...a : Drive type Dynamic Disk. [Measures] : Dynamic disk GPT Partition Disk. : GPT partition disk Multi Partition Disk. : Multi partition disks Partition disk with the GPT (GUID Partition Table) format cannot be used. iSM19118: Specified volume does not exist in volume list.
Chapter 2 Message List iSM19120: The operation to the volume specified is forbidden. (type=) [Classification] ERROR [Explanation] The command was issued to the volume of which OS type is not supported. This message is output on Windows system. aaa...a [Measures] : OS type Check the OS type and re-execute. iSM19121: SV is not omissible.(Two or more SV(s) exist) [Classification] ERROR [Explanation] SV was omitted at execution for BV built with multiple SVs.
Chapter 2 Message List iSM19123: The volume which is not recognized cannot be specified. [BV:] [Classification] ERROR [Explanation] It indicates that the request cannot be accepted because the command was issued to the volume invisible to the self host. aaa...a [Measures] : Volume name Check the volume and re-execute. iSM19124: SV of snap/inactive is already exist. [Classification] INFO [Explanation] The SV with snapshot inactive (snap/inactive) already exists.
Chapter 2 Message List iSM19127: Request has already completed. [Classification] INFO [Explanation] It indicates that the request is already satisfied. [Measures] Unnecessary iSM19200: Mandatory option was not specified. () [Classification] ERROR [Explanation] Specified command does not have some required arguments, or invalid arguments are specified. When -file option is specified, an unavailable option is specified for the pair specified by the snapshot operation file. aaa...
Chapter 2 Message List iSM19203: Number of BV and SV was not equal. [Classification] ERROR [Explanation] The number of volumes specified for BV and SV is different. This message is output on UNIX system. [Measures] Make the number of BV and SV volumes equal. iSM19208: Illegal configuration was detected. (file=,line=) [Classification] ERROR [Explanation] Specified file contains invalid settings. [Measures] aaa...a : File name bbb...
Chapter 2 Message List iSM19210: Number of BV and SV was not equal. (file =,line=) [Classification] ERROR [Explanation] The number of volumes specified for BV and SV is different. [Measures] aaa...a : File name bbb...b : Number of lines Make the number of BV and SV volumes equal. iSM19212: Duplicated targets were detected. (file=,line= ) [Classification] WARNING [Explanation] Specified pair information is defined repeatedly. [Measures] aaa...
Chapter 2 Message List iSM19301: The unexpected error has occurred in iSM/Server. (code=aaa...a/bb/ccc...c) [Classification] ERROR [Explanation] An unexpected error has occurred. aaa...a : Process number bb : Detail information (This code is not disorder reason but a value for maintenance.) ccc...c [Measures] : Error detail code Abnormality was found in message from iSM server. Check status of iSM server. iSM19302: Specified Diskarray does not exist.
Chapter 2 Message List iSM19305: The timeout was detected by waiting of communication with iSM/Server. [Classification] ERROR [Explanation] Time-out occurred in socket exclusive control. [Measures] Another process may control the socket. Check status of iSM server and re-execute. iSM19306: Failed to connect iSM/Server.(errno=, phase=< bbb...b>) [Classification] ERROR [Explanation] Failed in connecting the socket. [Measures] aaa...a : System call error number bbb...
Chapter 2 Message List iSM19308: Failed to send to iSM/Server.(errno=, phase=) [Classification] ERROR [Explanation] Failed in sending messages to iSM server. [Measures] aaa...a : System call error number bbb...b : Error detail code Check connection status of iSM server. iSM19401: System call error has occurred.(func=, errno=, phase=) [Classification] ERROR [Explanation] System call failed. [Measures] aaa...
Chapter 2 Message List iSM19403: Failed to mount. [Classification] ERROR [Explanation] Mounting failed. This message is output on Windows system. [Measures] Check the message displayed immediately before to handle it. iSM19404: Failed to umount. [Classification] ERROR [Explanation] Unmounting failed. This message is output on Windows system. [Measures] Check the message displayed immediately before to handle it. iSM19405: Collecting information of display was failed.
Chapter 2 Message List iSM20000 ∼ iSM20000: [Classification] INFO [Explanation] Executed command line. aaa...a [Measures] : Entered character string Unnecessary iSM20010: iSMsc_chgmod has normally terminated. [Classification] INFO [Explanation] iSMsc_chgmod command normal termination message. [Measures] Unnecessary iSM20011: iSMsc_chgmod has normally terminated. [vol:] [Classification] INFO [Explanation] iSMsc_chgmod command normal termination message. aaa...
Chapter 2 Message List iSM20013: iSMsc_chgmod has abnormally terminated. [vol:] [Classification] ERROR [Explanation] iSMsc_chgmod command abnormal termination message. aaa...a [Measures] : Volume name Check the message displayed immediately before to handle it. iSM20020: iSMsc_link has normally terminated. [Classification] INFO [Explanation] iSMsc_link command normal termination message. [Measures] Unnecessary iSM20021: iSMsc_link has normally terminated. [LV:] [SV:
Chapter 2 Message List iSM20023: iSMsc_link has abnormally terminated. [LV:] [SV:] [Classification] INFO [Explanation] iSMsc_link command abnormal termination message. [Measures] aaa...a : Volume name bbb...b : Volume name Check the message displayed immediately before to handle it. iSM20030: iSMsc_unlink has normally terminated. [Classification] INFO [Explanation] iSMsc_unlink command normal termination message.
Chapter 2 Message List iSM20032: iSMsc_unlink has abnormally terminated. [Classification] INFO [Explanation] iSMsc_unlink command abnormal termination message. [Measures] Check the message displayed immediately before to handle it. iSM20033: iSMsc_unlink has abnormally terminated. [LV:][SV:] [Classification] INFO [Explanation] iSMsc_unlink command abnormal termination message. [Measures] aaa...a : Volume name bbb...
Chapter 2 Message List iSM20101: The volume from which capacity is different cannot be specified. [LV:] [{BV|SV}:] [Classification] ERROR [Explanation] It indicates that the request cannot be accepted because the capacity of LV is different from that of BV or SV. [Measures] aaa...a : Volume name bbb...b : Volume name Check the volume capacity and re-execute. iSM20102: The Volume from which volume type is different type cannot be specified. [LV:] [{BV|SV}:
Chapter 2 Message List iSM20104: State of SV's access mode is invalid. (mode=) [SV:] [Classification] ERROR [Explanation] It indicates that the request cannot be accepted because the access restriction of specified volume is not "Not Ready". aaa...a bbb...b [Measures] : Access restriction of specified volume rw : Input/output allowed ro : Read only na : Access prohibited : Volume name Change the access restriction to "Not Ready" and re-execute.
Chapter 2 Message List iSM20108: SV which is not snap/active cannot be specified. [SV:] [Classification] ERROR [Explanation] Link cannot be set because SV with snapshot inactive is specified as link connection volume. aaa...a [Measures] : Volume name Check the SV status and re-execute. iSM20109: The volume which is not link target volume cannot be specified. [{BV|SV}:] [Classification] ERROR [Explanation] Specified volume is not to be linked to LV. aaa...
Chapter 2 Message List iSM20116: Version of API is invalid. [Classification] ERROR [Explanation] API version is invalid. [Measures] Use the API with the correct version. iSM20117: License for snapshot is locked. [Classification] ERROR [Explanation] The snapshot product has not been purchased. [Measures] Purchase the product to perform snapshot operation. iSM20118: Snapshot function is not supported with this volume. [Classification] ERROR [Explanation] The snapshot function is not supported.
Chapter 2 Message List iSM20120: Link information does not exist. [VOL:] [Classification] ERROR [Explanation] The command cannot be executed because the specified volume is neither LV nor link target volume. aaa...a [Measures] : Volume name Check the volume and re-execute. iSM20121: The volume which is not recognized cannot be specified. [BV:
Chapter 2 Message List iSM20123: State of specified diskarray is 'freeze'. [Classification] ERROR [Explanation] The disk array where specified volume is stored is in the freeze state. [Measures] Cancel the freeze state and re-execute. iSM20200: Mandatory option was not specified.() [Classification] ERROR [Explanation] Specified command does not have some required options. () may or may not be displayed. aaa...
Chapter 2 Message List iSM20203: Specified volume group does not exist.(vg=) [Classification] ERROR [Explanation] Specified volume group is invalid. aaa...a [Measures] : Volume group Specify a correct volume group. iSM20204: Specified disk group does not exist.(dg=) [Classification] ERROR [Explanation] Specified disk group is invalid. aaa...a [Measures] : Disk group Specify a correct disk group. iSM20205: Duplicated targets were detected. (file=, line=
Chapter 2 Message List iSM20206: Specified file does not exist. (file=) [Classification] ERROR [Explanation] Specified file does not exist. aaa...a [Measures] : File name Specify a correct file name. iSM20207: Specified file is invalid.(illegal file type) (file=) [Classification] ERROR [Explanation] The specified file type cannot be processed. aaa...a [Measures] : File name Specify the file created by the regular file. (UNIX) Specify a file created as a text file.
Chapter 2 Message List iSM20209: Illegal option value was detected. (file=, line=) [Classification] ERROR [Explanation] Specified file contains invalid options. [Measures] Correct the file and re-execute. iSM20210: Empty file cannot be specified. (file=) [Classification] ERROR [Explanation] Specified file is empty. aaa...a [Measures] : File name Check the file and re-execute. iSM20211: Illegal volume flag was specified to be () option.
Chapter 2 Message List iSM20301: The unexpected error has occurred in iSM/Server. (code=aaa...a/bb/ccc...c) [Classification] ERROR [Explanation] An unexpected error has occurred. aaa...a : Process number bb : Detail information (This code is not disorder reason but a value for maintenance.) ccc...c [Measures] : Error detail code Abnormality was found in message from iSM server. Check status of iSM server. iSM20302: Specified Diskarray does not exist.
Chapter 2 Message List iSM20304: Timeout error has occurred in iSM/Server. [Classification] ERROR [Explanation] Time-out occurred in process of iSM server. [Measures] Loads on iSM server may be too heavy. Check status of iSM server and re-execute. iSM20305: The timeout was detected by waiting of communication with iSM/Server. [Classification] ERROR [Explanation] Time-out occurred in socket exclusive control. [Measures] Another process may control the socket.
Chapter 2 Message List iSM20307: Failed to receive from iSM/Server.(errno=, phase=) [Classification] ERROR [Explanation] Failed in receiving messages from iSM server. [Measures] aaa...a : System call error number bbb...b : Error detail code Check connection status with iSM server. iSM20308: Failed to send to iSM/Server.(errno=, phase=) [Classification] ERROR [Explanation] Failed in sending messages from iSM server. [Measures] aaa...
Chapter 2 Message List iSM20402: Unexpected error occurred. (phase=) [Classification] ERROR [Explanation] An unexpected error has occurred. aaa...a [Measures] : Error detail code Check the details and re-execute. iSM20403: SCSI I/O error is detected. (device=aaaa, cdb =bbbb,status=cccc/dddd/ee/ff/gg) [Classification] ERROR [Explanation] An error has occurred during SCSI command execution. [Measures] aaa...
Chapter 2 Message List iSM20404: Control path is blockaded. (device=aaaa, cdb =bbbb,status=cccc/dddd/ee/ff/gg) [Classification] WARNING [Explanation] Paths are switched. [Measures] aaa...a : Failed device name bbbb : Command Descriptor Block of issued command cccc : SCSI command execution result dddd : SCSI sense result ee : SCSI sense information SenseKey ff : SCSI sense information SenseCode gg : SCSI sense information Qualifier Unnecessary iSM20405: Illegal device is specified.
Chapter 2 Message List iSM20406: Failed to umount. [Classification] ERROR [Explanation] Unmounting failed. This message is output on Windows system. [Measures] Check the message displayed immediately before to handle it.
Chapter 2 Message List iSM99000 ∼ iSM99001: Connected with iSM server (Server=, Port=, User=, Client=) [Classification] INFO [Explanation] It has connected with the server (internal message of iSM client). aaa...a : Server name bbb...b : Port name ccc...c : User name ddd...d : Client name iSM99002: Disconnected with iSM server (Server=, Port=, User=, Client=
Chapter 2 Message List iSMnetconf: 001 ∼ iSMnetconf: 001 Command complete successfully. [Classification] INFO [Explanation] Succeeded in command execution. [Measures] Unnecessary iSMnetconf: 101 Command has failed. () [Classification] INFO [Explanation] Failed in SCSI command execution. aaa...a [Measures] : Additional information Service processor was not set correctly. Check that no problem exists in the specified parameter, or the connection between host and disk array is normal.
Chapter 2 Message List iSMnetconf: 112 Changed to the alternative path. () [Classification] INFO [Explanation] Switched to alternative path. aaa...a [Measures] : Additional information Unnecessary iSMnetconf: 201 Resource does not exist. () [Classification] INFO [Explanation] Applicable resource does not exist. aaa...a [Measures] : Additional information Check that service processor has been installed. iSMnetconf: 202 Many target resources exist.
Chapter 2 Message List iSMnetconf: 211 Specified Disk Array Subsystem is not supported. () [Classification] INFO [Explanation] Specified disk array is not supported by this program. aaa...a [Measures] : Additional information Specify a special file that indicates disk array that is applicable to this program. iSMnetconf: 212 Specified Disk Array Subsystem is set by another maintenance tool. () [Classification] INFO [Explanation] Specified disk array is being set by other tool.
Chapter 2 Message List iSMnetconf: 222 Specified parameter is illegal. () [Classification] INFO [Explanation] Specified parameter is invalid. aaa...a [Measures] : Additional information Specify a valid parameter. iSMnetconf: 223 Specified IP Address is alive. () [Classification] INFO [Explanation] Specified IP address is being used by other network device. aaa...a [Measures] : Additional information Specify an IP address that is not used by other network device.
Chapter 2 Message List iSMnetconf: 225 Specified Subnet Mask is illegal. () [Classification] INFO [Explanation] Specified subnet mask is invalid. aaa...a [Measures] : Additional information Specify a valid subnet mask. iSMnetconf: 226 Specified Gateway Address is illegal. () [Classification] INFO [Explanation] Specified gateway address is invalid. aaa...a [Measures] : Additional information Specify a valid gateway address. iSMnetconf: 227 Specified IP Address is duplicated.
Chapter 2 Message List iSMnetconf: 228 Specified IP Address is already registered. () [Classification] INFO [Explanation] Specified IP address has already been registered. aaa...a [Measures] : Additional information Specify an IP address that has not yet been registered. iSMnetconf: 229 Specified IP Address is not registered. () [Classification] INFO [Explanation] Specified IP address has not been registered. aaa...
Chapter 2 Message List iSMnetconf: 241 Specified file cannot be read. [Classification] INFO [Explanation] Specified file cannot be read. [Measures] Check that specified file name is correct and authority to access file is given. iSMnetconf: 242 File format is illegal. () [Classification] INFO [Explanation] File format is illegal. aaa...a [Measures] : Additional information Check that setting file format is correct.
Chapter 2 Message List iSMprfarc: 101 ∼ iSMprfarc: 101 Not PSL file -- [Explanation] The specified file is not a statistic info file. aaa...a [Measures] : Specified file name Specify the correct file. iSMprfarc: 102 Can’t open file -- func= errno= [Explanation] [Measures] The input file or output file cannot be opened. aaa...a : Name of the file to be opened bbb...
Chapter 2 Message List iSMprfarc: 105 Can’t input multi-level file [Explanation] Statistic information history files and statistic information primary summarized files cannot be mixed. [Measures] Specify either statistic information history files or statistic information primary summarized files. iSMprfarc: 106 Out of range -- [Explanation] The specified target period of summarizing is erroneous. Any periods prior to 1970 or in the future cannot be specified.
Chapter 2 Message List iSMprfarc: 110 Read error -- func= errno= [Explanation] [Measures] Read of the statistic info file failed. aaa...a : Name of the file which was read bbb...b : Name of the function where the error occurred cccc : Error number Remove the cause of read failure, or check whether the specified statistic info file is damaged or not. iSMprfarc: 111 Write error -- func=
Chapter 2 Message List iSMprfarc: 120 Illegal file format -- [Explanation] The specified file is a wrong file that is not the statistic information history file/statistic information summarized file, or a statistic information file of unprocessable version. aaa...a [Measures] : Name of the wrong file Check the specified file.
Chapter 2 Message List iSMprfctl 011: Illegal option -- [Explanation] An illegal option was specified. aaa...a [Measures] : Name of the illegal option Specify the correct option, and then re-execute the command. iSMprfctl 012: Missing option value [Explanation] No value has been specified in the option. aaa...a [Measures] -- : Name of the option in which no value has been specified Specify a value in the option, and then re-execute the command.
Chapter 2 Message List iSMprfctl 021: Specified Disk Array is invalid [Explanation] The command cannot be executed for the specified disk array because of the following: y The specified disk array is not one to be monitored by iSM. y The specified disk array is not permitted to use the performance optimization function. [Measures] Check for the specified disk array name or the available product status.
Chapter 2 Message List iSMprfctl 030: Specified Logical Disk is invalid [Explanation] The specification of the logical disk to be moved is invalid. Check: y if the specified logical disk exists in the specified disk array. y if the specified logical disk is defined as a work disk for optimization. y if the specified logical disk is defined as a cache resident disk. [Measures] Review the specification of the logical disk to be moved, and then re-execute the command.
Chapter 2 Message List iSMprfctl 033: Specified Logical Disk is multi rank type [Explanation] The specified logical disk to be moved is a multi-RANK disk, and it cannot be moved. [Measures] Review the specification of the logical disk to be moved, and then re-execute the command. iSMprfctl 035: Specified Logical Disk and Optimization Work Disk are in the same rank [Explanation] The logical disk to be moved and the work disk for optimization exist in the same RANK, and the logical disk cannot be moved.
Chapter 2 Message List iSMprfctl 037: Specified Optimization Work Disk name overlaps [Explanation] The name of the specified work disk for optimization is identical to the name of another disk in the specified disk array. [Measures] Correct the volume format specification of the work disk for optimization, and then re-execute the command. iSMprfctl 040: Specified Logical Disk is under moving [Explanation] The specified logical disk to be moved is already moving.
Chapter 2 Message List iSMprfctl 043: Specified Optimization Work Disk is not in normal state [Explanation] The specified work disk for optimization is not in normal state, and it cannot be moved. [Measures] Rebuild the work disk for optimization or specify another one, and then re-execute the command. iSMprfctl 044: Number of movement exceeds permissible amount [Explanation] The number of specified disks to be concurrently moved exceeded the allowable maximum in the specified disk array.
Chapter 2 Message List iSMprfctl 050: Failed in communication with iSMsvr func= errno= detcode= [Explanation] [Measures] An error occurred during communication with the iSM server. aaa...a : Function name bbbb : Error code cccccccc : Detail code Eliminate the error cause (e.g., restarting the iSM server), and then re-execute the command. iSMprfctl 051: Time out has occurred [Explanation] A timeout occurred during communication with the iSM server.
Chapter 2 Message List iSMprfctl 090: HW error has occurred in start of Logical Disk movement [Explanation] An error occurred in the disk array, and moving of the logical disk failed to start. [Measures] Check the error cause according to the related messages, recover the disk array from the error, and then re-execute the command. iSMprfctl 910: Illegal function parameter [Explanation] An illegal subcommand was specified.
Chapter 2 Message List iSMprfedit: 001 ∼ iSMprfedit: 001 > [Explanation] The performance information of the statistical information history file or statistical information summary file was edited and output as a report normally. aaa...a : Name of the statistical information history file or statistical information summary file (character string) bbb...
Chapter 2 Message List iSMprfedit: 103 Missing option - [Explanation] It indicates that required option is not specified. aaa...a [Measures] : Option name required to be specified (String) Specify the option correctly and execute the command again. iSMprfedit: 110 File open error - func = errno = ds = [Explanation] It indicates that an error occurred in the open process of the file. aaa...
Chapter 2 Message List iSMprfedit: 112 Read error - func = errno = ds = [Explanation] It indicates that an error occurred in the input process of the file. aaa...a : Name of the file for which the error occurred in the input process (String) [Measures] bbb...
Chapter 2 Message List iSMprfedit: 115 Memory allocate error func = errno = ds = [Explanation] It indicates that an error occurred in memory allocation process. aaa...a : Name of the file for which the error occurred in the memory allocation process (String) [Measures] bbb...
Chapter 2 Message List iSMprfedit: 122 Since there is no data of , performance report has not been created [Explanation] It indicates that specified statistic information history file/statistic information summarized file does not contain the statistic information of the performance detail report, and specified performance detail report could not be created. aaa...a : Component type of which detailed report could not be created. (String) bbb...
Chapter 2 Message List iSMprfedit: 999 Unexpected error - ds = [Explanation] It indicates that an error occurred in the internal processing of iSMprfedit. aaa...a : Name of the specified statistic information history file/statistic information summarized file (String) bbbbbbbb [Measures] : Detailed code of the error (in Hexadecimal) Execute the command again.
Chapter 2 Message List iSMprfext: 001 ∼ iSMprfext: 001 > [Explanation] The statistical information of the statistical information history file or statistical information summary file was converted into CSV format and output as a CSV format file normally. aaa...a : Name of the statistical information history file or statistical information summary file (character string) bbb...
Chapter 2 Message List iSMprfext: 004 File open error - func = errno = [Explanation] It indicates that an error occurred in the open process of the file. aaa...a : Name of the file for which the error occurred in the open process (String) [Measures] bbb...b : Name of the function where the error occurred (String) cccc : Error number (in Decimal) Check file specification and access right of the file. Then, remove the cause of the error, and execute the command again.
Chapter 2 Message List iSMprfext: 007 Write error - func = errno = [Explanation] It indicates that an error occurred in the write process of the file. aaa...a : Name of the file for which the error occurred in the write process (String) [Measures] bbb...
Chapter 2 Message List iSMprfext: 010 Unexpected error - ds = [Explanation] It indicates that an error occurred in the internal processing of CSV Conversion Tool. aaa...a : Name of the specified statistic information history file/statistic information summarized file (String) bbbbbbbb [Measures] : Detailed code of the error (in Hexadecimal) Execute the command again. iSMprfext: 011 Record count is over max value -
Chapter 2 Message List iSMprflog:001 ∼ iSMprflog:001 Disk array= logging is started interval= [Explanation] It indicates that data accumulation in statistic information history file has been started. [Measures] aaa...a : Disk array name bb : Accumulating interval (minute) Unnecessary iSMprflog:002 Disk array= logging is already started [Explanation] It indicates that data accumulation in statistic information history file has already been started. aaa...
Chapter 2 Message List iSMprflog:010 Disk array= logging is stopped [Explanation] It indicates that data accumulation in statistic information history file has been terminated. aaa...a [Measures] : Disk array name Unnecessary iSMprflog:011 Disk array= logging is already stopped [Explanation] It indicates that data accumulation in statistic information history file has been already terminated. aaa...
Chapter 2 Message List iSMprflog:102 Missing option value - [Explanation] It indicates that value of -aaaaa option has not been specified. aaaaa [Measures] : Specified value Specify required option value and retry command execution. iSMprflog:103 Illegal option value - [Explanation] It indicates that an invalid option value has been specified. aaaaa [Measures] : Option name with invalid value Specify correct option value and retry command execution.
Chapter 2 Message List iSMprflog:122 There is no disk array [Explanation] It indicates that target disk array does not exist when batch operation is executed for all the disk array with -a option specified. [Measures] Check status of disk array, and retry command if necessary. iSMprflog:123 Disk array= is overload [Explanation] It indicates that accumulation of statistic information could not start due to the following reasons: (1) Disk array is overloaded. (2) Disk array faulty. aaa...
Appendix A Message Output Destination List Appendix A Message Output Destination List This appendix lists the destinations of messages output by iSM.
Appendix A Table A-1 ID iSM02021 iSM02040 iSM02041 iSM02042 iSM02043 iSM02050 iSM02051 iSM02052 iSM02053 iSM02060 iSM02061 iSM03100 iSM03101 iSM03102 iSM03103 iSM03104 iSM03105 iSM03106 iSM03107 iSM03108 iSM03109 iSM03110 iSM03111 iSM03112 iSM03113 iSM03114 iSM03120 iSM03121 iSM03122 iSM03130 iSM03131 iSM03132 iSM03133 iSM03134 iSM03140 iSM03141 iSM03142 iSM03150 iSM03151 iSM03152 iSM03200 iSM03201 Classification NOTICE INFO INFO NOTICE NOTICE INFO INFO INFO INFO NOTICE NOTICE WARNING WARNING ERROR ERRO
Appendix A Message Output Destination List Table A-1 ID iSM03203 iSM03204 iSM03220 iSM03221 iSM03222 iSM03224 iSM03225 iSM03300 iSM03301 iSM03302 iSM03303 iSM03400 iSM03410 iSM03411 iSM03420 iSM03430 iSM03441 iSM03442 iSM03500 iSM03900 iSM04020 iSM04021 iSM04022 iSM04023 iSM04024 iSM04025 iSM04030 iSM04040 iSM04060 iSM06020 iSM06021 iSM06029 iSM06030 iSM06031 iSM06032 iSM06033 iSM06034 iSM06035 iSM06036 iSM06037 iSM06038 iSM06039 iSM06040 Classification ERROR ERROR ERROR ERROR ERROR ERROR ERROR INFO IN
Appendix A Table A-1 ID iSM06041 iSM06042 iSM06043 iSM06044 iSM06045 iSM06047 iSM06048 iSM06050 iSM06051 iSM06062 iSM06063 iSM06064 iSM06065 iSM06066 iSM06068 iSM06070 iSM06071 iSM06080 iSM06081 iSM06082 iSM06083 iSM06084 iSM06085 iSM06086 iSM06087 iSM06088 iSM06091 iSM06092 iSM06093 iSM06099 iSM06902 iSM07011 iSM07012 iSM07021 iSM07022 iSM07023 iSM07024 iSM07025 iSM07026 Classification WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNIN
Appendix A Message Output Destination List Table A-1 ID Classification Message Output Destination List Operation log UNIX Windows Output destination Syslog Event log HP-UX Solaris Windows (5/39) Console ESMPRO link ALIVE/ Manager express report iSM07031 iSM07032 iSM07033 iSM07034 iSM07035 iSM07091 iSM07092 iSM07093 iSM07094 iSM07095 iSM07101 iSM07102 iSM07104 iSM07105 iSM07106 iSM07108 iSM07109 INFO INFO INFO INFO INFO WARNING WARNING ERROR ERROR ERROR INFO ERROR NOTICE NOTICE NOTICE ERROR INFO {
Appendix A Table A-1 ID iSM07151 iSM07152 iSM07154 iSM07155 iSM07156 iSM07158 iSM07159 iSM07161 iSM07162 iSM07163 iSM07164 iSM07165 iSM07166 iSM07171 iSM07172 iSM07173 iSM07174 iSM07175 iSM07176 iSM07177 iSM07178 iSM07179 iSM07180 iSM07181 iSM07182 iSM07183 iSM07191 iSM07192 iSM07193 iSM07194 iSM07195 iSM07196 iSM07197 iSM07198 iSM07201 iSM07202 iSM07203 iSM07204 iSM07205 iSM07206 iSM07207 iSM07208 Classification INFO ERROR NOTICE NOTICE NOTICE ERROR INFO INFO ERROR ERROR NOTICE NOTICE NOTICE INFO ERROR
Appendix A Message Output Destination List Table A-1 ID Classification Message Output Destination List Operation log UNIX Windows Output destination Syslog Event log HP-UX Solaris Windows iSM07211 iSM07212 iSM07213 iSM07220 INFO INFO INFO INFO { { { { { { { { { ∆ iSM07221 INFO { { { ∆ iSM07251 iSM07252 iSM07253 iSM07301 WARNING WARNING WARNING INFO { { { { { { { { { { { { { { { ∆ iSM07302 iSM07303 iSM07304 iSM07305 iSM07306 iSM07307 iSM07308 iSM07309 iSM07310 iSM07
Appendix A Table A-1 ID iSM07411 iSM07412 iSM07413 iSM07414 iSM07415 iSM07416 iSM07452 iSM07454 iSM07459 iSM07461 iSM07462 iSM07463 iSM07464 iSM07465 iSM07466 iSM07501 iSM07503 iSM07504 iSM07505 iSM07506 iSM07507 iSM07509 iSM07511 iSM07512 iSM07513 iSM07550 iSM07551 iSM07552 iSM07553 iSM07554 iSM07555 iSM07556 iSM07557 iSM07601 iSM07602 iSM07611 iSM07616 iSM07617 iSM07620 Classification INFO ERROR ERROR NOTICE NOTICE NOTICE INFO NOTICE INFO INFO ERROR ERROR NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTI
Appendix A Message Output Destination List Table A-1 ID iSM07621 iSM07622 iSM07670 iSM07671 iSM07672 iSM07900 iSM07950 iSM07981 iSM08020 iSM08021 iSM08022 iSM08030 iSM08031 iSM08032 iSM08033 iSM08034 iSM08035 iSM08036 iSM08037 iSM08050 iSM08051 iSM08052 iSM08053 iSM08054 iSM08055 iSM08056 iSM08060 iSM08061 iSM08062 iSM08063 iSM08070 iSM08071 iSM08072 iSM08091 iSM08092 iSM08093 iSM08094 iSM08099 iSM08180 Classification NOTICE ERROR INFO NOTICE ERROR WARNING WARNING NOTICE INFO INFO NOTICE NOTICE NOTICE
Appendix A Table A-1 ID iSM08181 iSM08182 iSM08183 iSM08201 iSM08900 iSM09001 iSM09002 iSM09003 iSM09004 iSM09005 iSM09006 iSM09007 iSM09008 iSM09009 iSM09010 iSM09011 iSM09012 iSM09013 iSM09014 iSM09015 iSM09016 iSM09017 iSM09018 iSM09019 iSM09020 iSM09021 iSM09022 iSM09099 iSM09101 iSM09102 iSM09103 iSM09104 iSM09105 iSM09106 iSM09107 iSM09108 iSM10001 iSM10002 iSM10020 iSM10040 iSM10100 iSM10101 iSM10102 iSM10103 iSM10104 Classification NOTICE NOTICE NOTICE NOTICE WARNING NOTICE NOTICE NOTICE NOTICE
Appendix A Message Output Destination List Table A-1 ID iSM10106 iSM10200 iSM10201 iSM10210 iSM10220 iSM10302 iSM10303 iSM10304 iSM10305 iSM10306 iSM10307 iSM10308 iSM10309 iSM10310 iSM10311 iSM10312 iSM10313 iSM10314 iSM10315 iSM10316 iSM10317 iSM10318 iSM10320 iSM10321 iSM10322 iSM10323 iSM10324 iSM10325 iSM10330 iSM10331 iSM10332 iSM10333 iSM10334 iSM10400 iSM10401 iSM10402 iSM10403 iSM10410 iSM10411 iSM10420 iSM10430 iSM10440 Classification NOTICE NOTICE NOTICE NOTICE ERROR INFO INFO INFO INFO INFO
Appendix A Table A-1 ID iSM10501 iSM10502 iSM10503 iSM10504 iSM10505 iSM10900 iSM11100 iSM11101 iSM11102 iSM11103 iSM11104 iSM11105 iSM11106 iSM11107 iSM11108 iSM11109 iSM11110 iSM11151 iSM11152 iSM11153 iSM11154 iSM11155 iSM11161 iSM11162 iSM11163 iSM11164 iSM11171 iSM11172 iSM11173 iSM11174 iSM11175 iSM11176 iSM11178 iSM11179 iSM11180 iSM11182 iSM11183 iSM11184 iSM11220 iSM11221 iSM11222 iSM11230 Classification ERROR ERROR ERROR ERROR ERROR WARNING INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INF
Appendix A Message Output Destination List Table A-1 ID iSM11231 iSM11232 iSM11233 iSM11234 iSM11235 iSM11236 iSM11237 iSM11240 iSM11241 iSM11242 iSM11250 iSM11251 iSM11252 iSM11253 iSM11255 iSM11257 iSM11258 iSM11300 iSM11305 iSM11306 iSM11307 iSM11308 iSM11309 iSM11310 iSM11311 iSM11320 iSM11321 iSM11322 iSM11323 iSM11300 iSM11340 iSM11360 iSM11361 iSM11362 iSM11363 iSM11364 iSM11365 iSM11366 iSM11367 iSM11369 iSM11370 Classification INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO IN
Appendix A Table A-1 ID iSM11372 iSM11373 iSM11374 iSM11375 iSM11376 iSM11377 iSM11378 iSM11379 iSM11380 iSM11381 iSM11382 iSM11383 iSM11384 iSM11385 iSM11402 iSM11403 iSM11404 iSM11405 iSM11406 iSM11407 iSM11408 iSM11409 iSM11410 iSM11412 iSM11413 iSM11414 iSM11415 iSM11416 iSM11417 iSM11419 iSM11420 iSM11421 iSM11422 iSM11423 iSM11424 iSM11425 iSM11426 iSM11429 iSM11431 iSM11438 iSM11439 iSM11440 Classification INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO I
Appendix A Message Output Destination List Table A-1 ID iSM11442 iSM11443 iSM11444 iSM11455 iSM11486 iSM11487 iSM11501 iSM11502 iSM11503 iSM11504 iSM11505 iSM11506 iSM11507 iSM11508 iSM11509 iSM11510 iSM11521 iSM11522 iSM11531 iSM11532 iSM11533 iSM11534 iSM11535 iSM11536 iSM11537 iSM11538 iSM11539 iSM11540 iSM11542 iSM11543 iSM11544 iSM11545 iSM11546 iSM11548 iSM11549 iSM11557 Classification INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO IN
Appendix A Table A-1 ID iSM11561 iSM11562 iSM11563 iSM11564 iSM11565 iSM11566 iSM11567 iSM11568 iSM11569 iSM11570 iSM11571 iSM11572 iSM11573 iSM11574 iSM11575 iSM11576 iSM11577 iSM11578 iSM11579 iSM11580 iSM11581 iSM11582 iSM11583 iSM11584 iSM11585 iSM11586 iSM11587 iSM11600 iSM11601 iSM11602 iSM11603 iSM11604 iSM11605 iSM11700 iSM11701 iSM11702 iSM11703 iSM11704 iSM11705 iSM11706 iSM11707 iSM11708 iSM11709 iSM11710 Classification INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INF
Appendix A Message Output Destination List Table A-1 ID iSM11711 iSM11712 iSM11713 iSM11714 iSM11721 iSM11722 iSM11723 iSM11724 iSM11725 iSM11726 iSM11727 iSM11728 iSM11729 iSM11730 iSM11731 iSM11732 iSM11733 iSM11734 iSM11735 iSM11736 iSM11737 iSM11738 iSM11739 iSM11740 iSM11742 iSM11743 iSM11744 iSM11745 iSM11746 iSM11747 iSM11748 iSM11749 iSM11750 iSM11751 iSM11755 iSM11756 iSM11757 iSM11758 iSM11759 iSM11760 Classification WARNING WARNING WARNING WARNING ERROR ERROR ERROR ERROR ERROR ERROR ERROR ER
Appendix A Table A-1 ID iSM11781 iSM11782 iSM11783 iSM11784 iSM11785 iSM11786 iSM11787 iSM11791 iSM11792 iSM11793 iSM11794 iSM11795 iSM11796 iSM11797 iSM11799 iSM11801 iSM11802 iSM11803 iSM11804 iSM13200 iSM13201 iSM13202 iSM13203 iSM13204 iSM13205 iSM13206 iSM13207 iSM13208 iSM13209 iSM13210 ISM13211 iSM13212 iSM13213 iSM13214 iSM13215 iSM13216 iSM13218 iSM13219 iSM13220 Classification ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR INFO INFO INFO INFO INFO INF
Appendix A Message Output Destination List Table A-1 ID Classification iSM13221 iSM13222 iSM13223 iSM13224 INFO INFO INFO INFO iSM13225 iSM13226 iSM13227 iSM13228 iSM13229 iSM13230 iSM13231 iSM13232 iSM13233 iSM13234 iSM13235 iSM13238 iSM13239 iSM13240 iSM13241 iSM13242 iSM13243 iSM13244 iSM13245 iSM13247 iSM13248 iSM13250 iSM13251 iSM13252 iSM13253 iSM13254 iSM13255 iSM13256 iSM13400 iSM13401 iSM13403 iSM13405 iSM13406 iSM13407 iSM13408 iSM13409 iSM13410 INFO INFO INFO INFO INFO INFO INFO INFO INFO
Appendix A Table A-1 ID iSM13411 iSM13412 iSM13413 iSM13414 iSM13415 iSM13480 iSM13481 iSM13482 iSM13483 iSM13500 iSM13501 iSM13502 iSM13503 iSM13504 iSM13505 iSM13506 iSM13507 iSM13508 iSM13509 iSM13510 iSM13511 iSM13512 iSM13513 iSM13514 iSM13515 iSM13516 iSM13517 iSM13518 iSM13519 iSM13520 iSM13521 iSM13522 iSM13523 iSM13524 iSM13525 iSM13526 iSM13527 iSM13528 iSM13529 iSM13530 Classification WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING ERROR ERROR ERROR ERROR ERROR ERROR E
Appendix A Message Output Destination List Table A-1 ID iSM13531 iSM13532 iSM13533 iSM13535 iSM13536 iSM13537 iSM13538 iSM13539 iSM13540 iSM13541 iSM13542 iSM13543 iSM13544 iSM13545 iSM13547 iSM13548 iSM13549 iSM13550 iSM13551 iSM13552 iSM13553 iSM13554 iSM13555 iSM13556 iSM13557 iSM13558 iSM13559 iSM13560 iSM13561 iSM13562 iSM13563 iSM13564 iSM13565 iSM13566 iSM13567 iSM13568 iSM13569 iSM13570 Classification ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERRO
Appendix A Table A-1 ID iSM13571 iSM13572 iSM13573 iSM13574 iSM13575 iSM13576 iSM13577 iSM13578 iSM13579 iSM13580 iSM13581 iSM13582 iSM13583 iSM13584 iSM13585 iSM13586 iSM13587 iSM13588 iSM13589 iSM13590 iSM13591 iSM13592 iSM13593 iSM13594 iSM13595 iSM13596 iSM13597 iSM13598 iSM13599 iSM13600 iSM13601 iSM13602 iSM13603 iSM13604 iSM13605 iSM13606 iSM13607 iSM13608 iSM13609 iSM13610 Classification ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR E
Appendix A Message Output Destination List Table A-1 ID iSM13611 iSM13612 iSM13613 iSM13614 iSM13615 iSM13616 iSM13617 iSM13618 iSM13619 iSM13623 iSM13624 iSM13625 iSM13626 iSM13627 iSM13629 iSM13630 iSM13631 iSM13632 iSM13633 iSM13634 iSM13635 iSM13636 iSM13637 iSM13638 iSM13639 iSM13640 iSM13641 iSM13642 iSM13644 iSM13645 iSM13646 iSM13647 iSM13648 iSM13649 iSM13650 iSM13651 iSM13652 iSM13653 iSM13654 iSM13655 iSM13656 iSM13657 iSM13658 iSM13659 iSM13660 Classification ERROR ERROR ERROR ERROR ERROR E
Appendix A Table A-1 ID iSM13661 iSM13662 iSM13663 iSM13664 iSM13669 iSM13670 iSM13671 iSM13672 iSM13673 iSM13674 iSM13675 iSM13676 iSM13677 iSM13678 iSM13679 iSM13680 iSM13681 iSM13682 iSM13683 iSM13684 iSM13685 iSM13686 iSM13687 iSM13688 iSM13689 iSM13690 iSM13691 iSM13692 iSM13693 iSM13694 iSM13695 iSM13696 iSM13697 iSM13698 iSM13699 iSM13700 Classification ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR E
Appendix A Message Output Destination List Table A-1 ID iSM13701 iSM13702 iSM13703 iSM13704 iSM13705 iSM13706 iSM13707 iSM13708 iSM13709 iSM13710 iSM13711 iSM13712 iSM13713 iSM13714 iSM13715 iSM13716 iSM13717 iSM13718 iSM13719 iSM13720 iSM13721 iSM13722 iSM13723 iSM13724 iSM13725 iSM13726 iSM13727 iSM13728 iSM13729 iSM13730 iSM13731 iSM13732 iSM13734 iSM13735 iSM13736 iSM13737 iSM13738 iSM13739 iSM13740 Classification ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR E
Appendix A Table A-1 ID iSM13741 iSM13742 iSM13743 iSM13744 iSM13745 iSM13746 iSM13747 iSM13748 iSM13749 iSM13750 iSM13751 iSM13752 iSM13753 iSM13754 iSM13755 iSM13761 iSM13762 iSM13763 iSM13764 iSM13765 iSM13766 iSM13767 iSM13768 iSM13769 iSM13770 iSM13771 iSM13772 iSM13773 iSM13774 iSM13775 iSM13776 iSM13777 iSM13778 iSM13779 iSM13780 iSM13800 Classification Message Output Destination List Message Output Destination List Operation log UNIX Windows Output destination Syslog Event log HP-UX Solaris W
Appendix A Message Output Destination List Table A-1 ID Classification Message Output Destination List Operation log UNIX Windows Output destination Syslog Event log HP-UX Solaris Windows (27/39) Console iSM13801 iSM13802 iSM13803 iSM13804 iSM13805 ERROR ERROR ERROR ERROR ERROR { { { { { { { { { { { { { { { iSM13806 iSM13807 iSM13808 iSM13809 iSM13810 iSM13811 iSM13812 iSM13813 iSM13814 iSM13815 iSM13816 iSM13817 iSM13818 iSM13819 iSM13820 iSM13821 iSM13822 iSM13823 iSM13824 iSM1382
Appendix A Table A-1 ID iSM14401 iSM14402 iSM14403 iSM14404 iSM14405 iSM14406 iSM14407 iSM14408 iSM14409 iSM14410 iSM14411 iSM14412 iSM14413 iSM14414 iSM14415 iSM14416 iSM14417 iSM14418 iSM14419 iSM14420 iSM14421 iSM14422 iSM14423 iSM14424 iSM14425 iSM14426 iSM14427 iSM14428 iSM14429 iSM14430 iSM14431 iSM14432 iSM14433 iSM14434 iSM14435 iSM14436 iSM14437 iSM14438 iSM14439 iSM14440 Classification INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO
Appendix A Message Output Destination List Table A-1 ID iSM14441 iSM14442 iSM14443 iSM14444 iSM14445 iSM14446 iSM14447 iSM14448 iSM14449 iSM14450 iSM14451 iSM14452 iSM14453 iSM14454 iSM14456 iSM14457 iSM14458 iSM14459 iSM14461 iSM14462 iSM14464 iSM14467 iSM14468 iSM14469 iSM14470 iSM14471 iSM14472 iSM14474 iSM14475 iSM14476 iSM14600 iSM14601 iSM15600 iSM16001 iSM16020 iSM16021 iSM16029 iSM16030 iSM16031 iSM16032 Classification INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO I
Appendix A Table A-1 ID iSM16033 iSM16034 iSM16035 iSM16037 iSM16038 iSM16039 iSM16041 iSM16043 iSM16044 iSM16045 iSM16047 iSM16048 iSM16049 iSM16061 iSM16062 iSM16063 iSM16064 iSM16065 iSM16066 iSM16070 iSM16071 iSM16080 iSM16081 iSM16082 iSM16083 iSM16084 iSM17001 iSM17002 iSM17003 iSM17004 iSM17010 iSM17020 iSM17030 iSM17040 iSM17050 iSM17900 Classification WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING W
Appendix A Message Output Destination List Table A-1 ID iSM18001 iSM18002 iSM18003 iSM18004 iSM18005 iSM18006 iSM18007 iSM18008 iSM18201 iSM18202 iSM18203 iSM18204 iSM18205 iSM18301 iSM18302 iSM18303 iSM18311 iSM18321 iSM18501 iSM18502 iSM18503 iSM18601 iSM18602 iSM18603 iSM18999 iSM19000 iSM19010 iSM19011 iSM19012 iSM19013 iSM19020 iSM19021 iSM19022 iSM19023 iSM19030 iSM19031 iSM19032 iSM19033 iSM19034 iSM19035 iSM19100 Classification INFO INFO INFO INFO INFO INFO ERROR NOTICE WARNING WARNING WARNING
Appendix A Table A-1 ID iSM19101 iSM19102 iSM19103 iSM19104 iSM19105 iSM19106 iSM19107 iSM19108 iSM19109 iSM19110 iSM19111 iSM19112 iSM19113 iSM19114 iSM19115 iSM19116 iSM19117 iSM19118 iSM19119 iSM19120 iSM19121 iSM19122 iSM19123 iSM19124 iSM19125 iSM19126 iSM19127 iSM19200 iSM19202 iSM19203 iSM19208 iSM19209 iSM19210 iSM19212 iSM19213 iSM19301 iSM19302 iSM19303 iSM19304 iSM19305 iSM19306 iSM19307 iSM19308 Classification ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERRO
Appendix A Message Output Destination List Table A-1 ID iSM19401 iSM19402 iSM19403 iSM19404 iSM19405 iSM19408 iSM20000 iSM20010 iSM20011 iSM20012 iSM20013 iSM20020 iSM20021 iSM20022 iSM20023 iSM20030 iSM20031 iSM20032 iSM20033 iSM20100 iSM20101 iSM20102 iSM20103 iSM20104 iSM20106 iSM20107 iSM20108 iSM20109 iSM20112 iSM20116 iSM20117 iSM20118 iSM20119 iSM20120 iSM20121 iSM20122 iSM20123 iSM20200 Classification ERROR ERROR ERROR ERROR ERROR INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO INFO
Appendix A Table A-1 ID iSM20201 iSM20202 iSM20203 iSM20204 iSM20205 iSM20206 iSM20207 iSM20208 iSM20209 iSM20210 iSM20211 iSM20301 iSM20302 iSM20303 iSM20304 iSM20305 iSM20306 iSM20307 iSM20308 iSM20401 iSM20402 iSM20403 iSM20404 iSM20405 iSM20406 iSM99001 iSM99002 Classification ERROR ERROR ERROR ERROR WARNING ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR WARNING ERROR ERROR INFO INFO Message Output Destination List Message Output Destination L
Appendix A Message Output Destination List Table A-1 ID iSMnetconf: 001 iSMnetconf :101 iSMnetconf: 111 iSMnetconf: 112 iSMnetconf: 201 iSMnetconf: 202 iSMnetconf: 203 iSMnetconf: 211 iSMnetconf: 212 iSMnetconf: 221 iSMnetconf: 222 iSMnetconf: 223 iSMnetconf: 224 iSMnetconf: 225 iSMnetconf: 226 iSMnetconf: 227 iSMnetconf: 228 iSMnetconf: 229 iSMnetconf: 230 iSMnetconf: 241 iSMnetconf: 242 iSMprfarc: 101 iSMprfarc: 102 Classification Message Output Destination List Operation log UNIX Windows Output de
Appendix A Table A-1 ID iSMprfarc: 103 iSMprfarc: 104 iSMprfarc: 105 iSMprfarc: 106 iSMprfarc: 107 iSMprfarc: 108 iSMprfarc: 109 iSMprfarc: 110 iSMprfarc: 111 iSMprfarc: 112 iSMprfarc: 120 iSMprfarc: 201 iSMprfctl 001 iSMprfctl 010 iSMprfctl 011 iSMprfctl 012 iSMprfctl 013 iSMprfctl 020 iSMprfctl 021 iSMprfctl 022 iSMprfctl 023 iSMprfctl 030 iSMprfctl 031 Classification Message Output Destination List Message Output Destination List Operation log UNIX Windows Output destination Syslog Event log HP-UX
Appendix A Message Output Destination List Table A-1 Message Output Destination List (37/39) Output destination Syslog Event log HP-UX Solaris Windows Console ID Classification Operation log UNIX Windows iSMprfctl 032 iSMprfctl 033 iSMprfctl 035 iSMprfctl 036 iSMprfctl 037 iSMprfctl 040 iSMprfctl 041 iSMprfctl 042 iSMprfctl 043 iSMprfctl 044 iSMprfctl 050 iSMprfctl 051 iSMprfctl 060 iSMprfctl 090 iSMprfctl 910 iSMprfedit: 001 iSMprfedit: 100 iSMprfedit: 101 iSMprfedit: 102 iSMprfedit: 103 iSMprfed
Appendix A Table A-1 Message Output Destination List Message Output Destination List (38/39) Output destination Syslog Event log HP-UX Solaris Windows Console ID Classification Operation log UNIX Windows iSMprfedit: 113 iSMprfedit: 114 iSMprfedit: 115 iSMprfedit: 120 iSMprfedit: 121 iSMprfedit: 122 iSMprfedit: 999 iSMprfext: 001 iSMprfext: 002 iSMprfext: 003 iSMprfext: 004 iSMprfext: 005 iSMprfext: 006 iSMprfext: 007 iSMprfext: 008 iSMprfext: 009 iSMprfext: 010 iSMprfext: 011 iSMprflog: 001 iSMprf
Appendix A Message Output Destination List Table A-1 ID iSMprflog: 100 iSMprflog: 101 iSMprflog: 102 iSMprflog: 103 iSMprflog: 104 iSMprflog: 120 iSMprflog: 121 iSMprflog: 122 iSMprflog: 123 iSMprflog: 900 Classification Message Output Destination List (39/39) Operation log UNIX Windows Output destination Syslog Event log HP-UX Solaris Windows Console - { - { - { - { - { - { - { - { - { - { {: Output ∆: Not output when the default is selected 672 ESMPRO link ALIVE/ Manager exp
Appendix B Changed Message List Appendix B Changed Message List Table B-1 Message ID iSM01110 Modification NOTICE New Illegal configuration. file= line= [section=] [keyword=] [value=] [token=] [detail=] NOTICE Old Data can not be received sequentially during split mode.ip=
Appendix B Changed Message List Table B-1 Message ID { New Old iSM07023 { New Old iSM07024 { New Old iSM07026 { ISM07092 { Resource monitoring stopped by control path fault. ( productID= SN=) [UC= FC=] Resource monitoring stopped by control path fault. ( productID= SN=) [UC= FC=] [_ALERT_] Resource monitoring stopped by information collecting failure. (
Appendix B Table B-1 Message ID Modification Added Changed Deleted iSM07112 { New iSM07123 ERROR ERROR New ERROR { { Old { New Old { New Old iSM07162 State of (h[-h]) has become fault. ( productID= SN= No=h )[_ALERT_] Classification State of LD has become fault(media error). ( productID= SN= No=h Name= [PDN=h-h]))[_ALERT_] { New iSM07159 State of (h[-h]) has become fault. (
Appendix B Changed Message List Table B-1 Message ID Modification Added Changed Deleted { New Old iSM07192 { New iSM07206 { Modification iSM version Old iSM07173 Message modification list (4/32) Old Message body State of LD has become fault(media error). ( productID= SN= No=h Name= [PDN=h-h]) [UC= FC=] State of LD has become fault(media error). ( productID= SN= No=h Name=
Appendix B Table B-1 Modification Message ID Added Changed Deleted Message modification list (5/32) Modification iSM version Message body - Old iSM07616 { New The capacity of SRA used is over threshold.( productID= SN= No=h Name= capacity=GB threshold=
Appendix B Changed Message List Table B-1 Message ID Modification { New iSM07950 Old { New Old iSM08035 { New Old iSM08054 { New Old iSM10302 { New Old iSM10318 Description iSM version Added Changed Deleted Old iSM07672 Message modification list (6/32) { New Message body Classification Expansion State of POOL has become expand-fail. ( productID= SN= No=h ERROR Name=) Expansion State of POOL has become expand-fail. ( productID=
Appendix B Table B-1 Message ID Message modification list (7/32) Modification Description iSM version Added Changed Deleted Old iSM10400 { iSM10401 New { iSM11181 { iSM11183 { iSM11184 { copy error:mv= (h) , rv= (h), status=h copy error:mv=(h), rv= (h), status=h[,ATgroup=] [_ALERT_] Classification NOTICE ERROR copy error:mv=(h)
Appendix B Changed Message List Table B-1 Message ID Modification Description iSM version Added Changed Deleted Old iSM11322 { iSM11377 { - - Old New iSM11437 { iSM11541 { Old { { iSM11574 Controller resource doesn't exist. () New Old iSM11573 INFO New New { iSM11382 The address which can be specified is h or h. INFO Old { Classification Old New New iSM11379 Message body The address which can be specified is “h” or “h”.
Appendix B Table B-1 Message ID iSM11714 iSM11740 Modification Description iSM iSM13219 { New New { New { iSM13229 { iSM13230 { iSM13247 { iSM13248 { { - Flush Normal End - Old iSM13228 iSM13251 return= Old { { - Flush Start Classification WARNING ERROR INFO - New iSM13250 Old Old iSM13226 - New Old { { Failed to get property of volume list data.
Appendix B Changed Message List Table B-1 Message ID iSM13252 iSM13253 Modification Message body - Old { { New Old Create Normal End New Create Abnormal End iSM13255 { New Delete Start - Delete Normal End Old { iSM13408 { iSM13409 { iSM13409 { iSM13410 { New New New Old New Old New Old iSM13533 { New New { - Old New INFO Specified targets are duplicated. MV= Specified targets are duplicated. MV= (code=--
Appendix B Table B-1 Message ID Modification Message modification list (11/32) Description iSM Added Changed Deleted version Message body Old iSM13560 { New Old { iSM13577 New Old { iSM13578 New Old { iSM13579 New Old iSM13583 { iSM13617 { New Old New State of the specified ATgroup is unknown. (code=---) These targets are replicating now. MV: RV: These targets are replicating now. MV: RV: (code=-
Appendix B Changed Message List Table B-1 Message ID Modification Message modification list (12/32) Description iSM Added Changed Deleted version iSM13656 { iSM13657 { iSM13658 Illegal value of -interval [second]. () ERROR New Illegal value of -interval [second]. () (code=---) ERROR Old Illegal value of -limit [second]. () ERROR New Illegal value of -limit [second]. () (code=---
Appendix B Table B-1 Message ID iSM13678 Modification { Old MV volume differs from database volume. ERROR New Specified volume differs from database volume. code=---) ERROR New { iSM13748 iSM13749 iSM13750 iSM13751 iSM13752 { { { { iSM13753 { iSM13754 { iSM13755 - { Failed to execute command. Attribute of specified volume is ‘reserve’. (code=---) Attribute of specified volume is ‘’.:
Appendix B Changed Message List Table B-1 Message ID Modification Message modification list (14/32) Description iSM Added Changed Deleted version Old iSM13761 { iSM13762 { iSM13763 { iSM13764 { New Message body Classification - - Illegal bvflg type. () (code=---) - Old New Illegal svflg type. () (code=---) - Old New SV is omitted. (code=---
Appendix B Table B-1 Message ID Modification Message modification list (15/32) Description iSM Added Changed Deleted version Message body - Old iSM13775 { New Deleting snapshot has terminated because "Snap State" is changed by other process. (code=---) - Old iSM13776 { New Restoring snapshot has terminated because "Snap State" is changed by other process. (code=---
Appendix B Changed Message List Table B-1 Message ID Modification Message modification list (16/32) Description iSM Added Changed Deleted version iSM13805 { Message body Classification Old Server name is too long.filename= line= ERROR New Server name is too long.filename= line= (code=---) ERROR - Old iSM13806 { New Back up set name is too long. filename= line= (code=--
Appendix B Table B-1 Message ID Modification Old iSM13815 { New Old iSM13816 { New Old iSM13817 { New iSM13818 { iSM13819 { iSM13820 { ERROR New Failed to metafolder () creation. (code=---) ERROR Old Insufficient database. () ERROR New Insufficient database. () (code=---) ERROR Old Illegal server name. () ERROR New { iSM13823 iSM13824 { { { Illegal server name.
Appendix B Changed Message List Table B-1 Message ID Modification Description iSM Added Changed Deleted version iSM13827 { iSM13828 { iSM13829 { iSM13830 { iSM13831 { iSM13832 { iSM13833 { iSM13834 { iSM13835 { iSM13836 { iSM14463 iSM14467 Message modification list (18/32) { { Message body Classification Old User id is too long. ERROR New User id is too long. (code=---) ERROR Old Password is too long.
Appendix B Table B-1 Message ID Modification Message modification list (19/32) Description iSM Added Changed Deleted version Message body - Old iSM14468 { New SRA bind : LD(SDV) number=h,h..., Pool number=h, SRA capacity=GB, threshold=GB(), status= - Old iSM14469 { iSM14470 { iSM14471 { New LV bind : LD(LV) number=h,h...(LD(BV) number=h,h...), Pool number=h, status=
Appendix B Changed Message List Table B-1 Message ID iSM16032 Modification Message modification list (20/32) Description iSM Added Changed Deleted version Message body - Old { New Illegal configuration. file=alived.conf [ALIVE]. { New Illegal configuration. file=alived.conf line= tag= { iSM16035 { iSM16037 { iSM16038 { New Illegal configuration. file=alived.conf keyword. line= New Illegal configuration. file=alived.conf New Illegal configuration. file=alived.
Appendix B Table B-1 Message ID iSM16061 Modification Message modification list (21/32) Description iSM Added Changed Deleted version { Message body { New { New { iSM16065 { iSM16066 { New - - iSM16070 { iSM16071 { iSM16080 { iSM16081 { iSM16082 { iSM16083 { New - New - New New { - { { WARNING - - Definition change is successful. function= AUTH= INFO Old - - New Definition change error. ALIVEmail function does not start.
Appendix B Changed Message List Table B-1 Message ID Modification Message modification list (22/32) Description iSM Added Changed Deleted version Old iSM18003 { New { New { iSM18006 { iSM18007 { iSM18008 { iSM18201 { New Old New Snapshot has been restored. (, BV= (h), SV=(h)) SV guard was changed.(, SV=(h),mode=- ) Snapshot was cancelled. (, BV= (h), SV=
Appendix B Table B-1 Message ID Modification Message modification list (23/32) Description iSM Added Changed Deleted version iSM18311 { iSM18321 { Message body { - - New Internal communication error has occurred. (code=) ERROR Old - - New Access to diskarray was failed. (, code=, ) - New Access mode was changed. (, LD=, (h), mode from to ) - Old iSM18502 { New Logical disk was linked to link-volume.
Appendix B Changed Message List Table B-1 Message ID iSM19012 Modification Message modification list (24/32) Description iSM Added Changed Deleted version { Old New { iSM19020 { New { New iSMsc_delete has normally terminated. iSMsc_delete has normally terminated. [BV:] [SV:] - Old iSM19022 { New iSMsc_delete has abnormally terminated. - Old iSM19023 { iSM19030 { New iSMsc_delete has abnormally terminated. [BV:] [SV:
Appendix B Table B-1 Message ID Modification Message modification list (25/32) Description iSM Added Changed Deleted version Message body - Old iSM19101 { iSM19102 { New The volume linked from LV cannot be specified. [{BV|SV}:] - Old New The volume mounted cannot be specified. [BV:] iSM19104 { { iSM19105 { iSM19106 { iSM19107 { iSM19108 { New State of specified diskarray is 'freeze'.
Appendix B Changed Message List Table B-1 Message ID iSM19114 iSM19115 Modification Message modification list (26/32) Description iSM Added Changed Deleted version { { iSM19116 { iSM19117 { Message body Classification - - Old New License for snapshot is locked. Old New Snapshot function is not supported with this volume. - Old New Specified drive number does not exist. - Old New Specified drive type is not supported.(type=
Appendix B Table B-1 Message ID Modification Message modification list (27/32) Description iSM Added Changed Deleted version iSM19202 { iSM19203 { Message body - Old New Illegal option value was specified. () - Old New Number of BV and SV was not equal. - Old iSM19208 { New Illegal configuration was detected. (file=,line=) - Old iSM19209 { iSM19210 { iSM19212 { iSM19213 { New Illegal option value was detected.(file=,line=
Appendix B Changed Message List Table B-1 Message ID Modification Message modification list (28/32) Description iSM Added Changed Deleted version Message body - Old iSM19307 { New Failed to receive from iSM/Server.(errno=, phase=< bbb...b >) - Old iSM19308 { iSM19401 { iSM19402 { iSM19403 { New Failed to send to iSM/Server.(errno=, phase=) - Old New System call error has occurred.(func=, errno=, phase=
Appendix B Table B-1 Message ID iSM20020 Modification Message modification list (29/32) Description iSM Added Changed Deleted version { Message body - Old New iSMsc_link has normally terminated. - Old iSM20021 { iSM20022 { New iSMsc_link has normally terminated. [LV:] [SV:] - Old New iSMsc_link has abnormally terminated. - Old iSM20023 { iSM20030 { New iSMsc_link has abnormally terminated. [LV:] [SV:
Appendix B Changed Message List Table B-1 Message ID Modification Message modification list (30/32) Description iSM Added Changed Deleted version iSM20106 { iSM20107 { Message body Old - - New Targets volumes are not linked. [LV:] [{BV|SV}:< bbb...b>] ERROR Old - - New The volume mounted cannot be specified. [LV:] - Old iSM20108 { New SV which is not snap/active cannot be specified. [SV:
Appendix B Table B-1 Message ID Modification Message modification list (31/32) Description iSM Added Changed Deleted version Message body - Old iSM20122 { iSM20123 { iSM20200 { iSM20201 { iSM20202 { iSM20203 { iSM20204 { New The volume which is not linked cannot be specified. [VOL:] - Old New State of specified diskarray is 'freeze'. - Old New Mandatory option was not specified.() - Old New Illegal option was specified.(
Appendix B Changed Message List Table B-1 Message ID iSM20302 Modification Message modification list (32/32) Description iSM Added Changed Deleted version { Message body - Old New Specified Diskarray does not exist. - Old iSM20303 { iSM20304 { iSM20305 { iSM20306 { New State of Diskarray includes specified volume is not monitoring. - Old New Timeout error has occurred in iSM/Server.