User manual

Statistics commands 53
TCP statistics
The following command displays TCP statistics:
show mp tcp-block
Command mode: All except User EXEC
All TCP allocated control blocks:
10ad41e8: 0.0.0.0 0 <=> 0.0.0.0 80 listen
10ad5790: 47.81.27.5 1171 <=> 47.80.23.243 23 established
The following table describes the Transmission Control Protocol (TCP) control block (TCB) statistics shown in this
example:
Table 48 MP specified TCP statistics
Description Example statistic
Memory 10ad41e8/10ad5790
Destination IP address 0.0.0.0/47.81.27.5
Destination port 0/1171
Source IP 0.0.0.0/47.80.23.243
Source port 80/23
State listen/established
UDP statistics
The following command displays UDP statistics:
show mp udp-block
Command mode: All except User EXEC
All UDP allocated control blocks:
161: listen
The following table describes the User Datagram Protocol (UDP) control block (UCB) statistics shown in this
example:
Table 49 UDP statistics
Description Example Statistic
Control block 161
State listen