User manual

Statistics commands 56
Table 51 SNMP statistics
Statistics Description
snmpOutGenErrs The total number of SNMP Protocol Data Units (PDUs), which were generated
by the SNMP protocol entity and for which the value of the error-status field is
genErr.
snmpOutGetRequests The total number of SNMP Get-Request Protocol Data Units (PDUs), which
have been generated by the SNMP protocol entity.
snmpOutGetNexts The total number of SNMP Get-Next Protocol Data Units (PDUs), which have
been generated by the SNMP protocol entity.
snmpOutSetRequests The total number of SNMP Set-Request Protocol Data Units (PDUs), which have
been generated by the SNMP protocol entity.
snmpOutGetResponses The total number of SNMP Get-Response Protocol Data Units (PDUs), which
have been generated by the SNMP protocol entity.
snmpOutTraps The total number of SNMP Trap Protocol Data Units (PDUs), which have been
generated by the SNMP protocol entity.
snmpSilentDrops The total number of GetRequest-PDUs, GetNextRequest-
PDUs,GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs
delivered to the SNMP entity which were silently dropped because the size of a
reply containing an alternate Response-PDU with an empty variable-bindings
field was too large.
snmpProxyDrops The total number of GetRequest-PDUs, GetNextRequest-
PDUs,GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs
delivered to the SNMP entity which were silently dropped because the
transmission of the message to a proxy target failed in a manner (other than a
time-out) such that no Response-PDU could be returned.
NTP statistics
The following command displays NTP statistics:
show ntp counters
Command mode: All
NTP statistics:
Primary Server:
Requests Sent: 17
Responses Received: 17
Updates: 1
Secondary Server:
Requests Sent: 0
Responses Received: 0
Updates: 0
Last update based on response from primary server.
Last update time: 18:04:16 Tue Mar 13, 2006
Current system time: 18:55:49 Tue Mar 13, 2006
The switch uses NTP (Network Timing Protocol) version 3 to synchronize the switch’s internal clock with an atomic
time-calibrated NTP server. With NTP enabled, the switch can accurately update its internal clock to be consistent
with other devices on the network and generates accurate syslogs.