User manual

Configuration Commands 72
HTTPS Access configuration
The following table describes the HTTPS Access Configuration commands.
Table 75 HTTPS Access Configuration commands
Command Description
[no] access https
enable
Enables or disables BBI access (Web access) using HTTPS. The default value is
disabled.
Command mode: Global configuration
access https port <TCP
port number>
Defines the HTTPS Web server port number.
Command mode: Global configuration
access https generate-
certificate
Allows you to generate a certificate to connect to the SSL to be used during the key
exchange. A default certificate is created when HTTPS is enabled for the first time.
The user can create a new certificate defining the information that they want to be
used in the various fields. For example:
• Country Name (2 letter code) [ ]: JP
• State or Province Name (full name) [ ]: Tokyo
• Locality Name (for example, city) [ ]: Fuchu
• Organization Name (for example, company) [ ]: NEC
• Organizational Unit Name (for example, section) [ ]: SIGMABLADE
• Common Name (for example, user’s name) [ ]: Taro
• Email (for example, email address) [ ]: [e-mail]
You must confirm if you want to generate the certificate. It takes approximately
30 seconds to generate the certificate. Then the switch restarts SSL agent.
Command mode: Global configuration
access https save-
certificate
Allows the client, or the Web browser, to accept the certificate and save the
certificate to Flash to be used when the switch is rebooted.
Command mode: Global configuration
show access
Displays the current SSL Web Access configuration.
Command mode: All except User EXEC