User's Manual

Specifications 5-7
VisuaLink 128/384 General Description
Operating Modes & Features
The following provides a summary of the main operating modes and
features for VisuaLink.
VisuaLink Unit Control
VisuaLink can be controlled by one of three devices:
• VisuaLink Wireless Infrared Remote Control
• VoicePoint+ or Analog Phone Set (connected to TEL jack)
• Personal Computer (connected to Serial Port)
A buzzer is built into VisuaLink, and will sound when an incoming call
is detected. When using a VoicePoint+ or analog phone, their
respective ringers will indicate an incoming call.
Call Dialing (Originating) Modes
• Direct dial calling (by the Remote Control, PC control, analog
telephone, and VoicePoint+)
• Speed-Dial calling (by the Remote Control, PC control)
• Redial calling (by the Remote Control, PC control)
VisuaLink provides 130 speed dial number address book for call
originating For redial, 30 numbers are automatically saved for both
incoming and outgoing calls.
VisuaLink can be set to only originate a call and can reject the
originating call that does not meet the specific condition. (Originating
number filter feature) Example conditions are:
• Incoming call only
• Inhibits originating a call to the number other than the registered
abbreviated dial numbers,
• Inhibits originating a call to special number (for example, the
number starting from 001).
Incoming Call Answer Modes
• Manual
• Automatic
• Selective
Selective is a security mode, and will automatically reject an incoming
call from phone numbers other than those in the abbreviated dial list.)