Instructions / Assembly

4
Course 3
Stagger each course as shown.
Course 1
Be sure your properly prepared base is level. Begin
building by laying your base course as shown.
Using a stiff brush, remove all debris and dust from
each block surface to be glued.
Butt blocks tightly together. 19 blocks per course.
Course 2
Continue to build each course as shown.
Use adhesive on each block.
IMPORTANT: Use adhesive
on first and second courses. Brush
excessive dust from blocks to be glued.
IMPORTANT: Lay glue bead away from
outside perimeter to prevent glue from
squeezing out between courses
© 2011 Rockwood Retaining Walls, Inc. All Rights Reserved. Please see copyright notice on page 2.
19 blocks
per course