Installation Guide

4
Course 1
Course 2
IMPORTANT: Use Super-Stik adhesive
on each course. Brush excessive dust
from blocks to be glued.
IMPORTANT: Lay glue bead away from
outside perimeter to prevent glue from
squeezing out between courses
Be sure your properly prepared base is level.
Begin building by laying your base course as
shown.
Using a stiff brush, remove all debris and dust
from each block surface to be glued.
Continue to build each course as shown. Use
adhesive on each block.
S
S
S
S
© 2010 Rockwood Retaining Walls, Inc. All Rights Reserved. Please see copyright notice on page 2.