Instructions / Assembly

© 2007 - 2017 Rockwood Retaining Walls, Inc. All Rights Reserved. Please see copyright notice on page 2.
S
Course 1
Be sure your properly prepared base is level. Begin
building by laying your base course as shown.
Using a stiff brush, remove all debris and dust from
each block surface to be glued.
Course 2
Continue to build each course as shown.
Use adhesive on each block.
FRONT
FI
RE
PLACE
IMPORTANT: Use adhesive
on each course. Brush excessive dust
from blocks to be glued.
IMPORTANT: Lay glue bead away from
outside perimeter to prevent glue from
squeezing out between courses
IMPORTANT: Keep glue away
from bottom of woodbox
S
L
S
5