Installation Instructions

LED behaviour
These are the scenarios of different lights and explanations
● Blue steady light - ready to be provisioned/installed without a wifi connection
● White steady light - ready to be provisioned/installed with a wifi connection
● Blue flashing light - connected with app and awaiting further instructions
● Flashing green light - Provisioning/installation in progress
● Green light - Provisioned (will restart and turn off lights)
● Red light - Provisioning failed, returns to provision mode (Blue or White steady light)
Note: Status of nodes will be available in the app and if something happens that requires attention an
alert in the app will be created. LED’s are turned off during normal operation.
Troubleshooting
Please visit our FAQ (www.nectarinehealth.com/support)
In the Nectarine Health App under System view(available to Home Admins) you can also get
guidance for troubleshooting the system.
Reset wristband
To trigger a factory reset on WRB, the user must perform following sequence of actions:
1.Press button → white led blinks
2.Hold button pressed for 7 s → blue led blinks (informing to release)
3.Release button for 5 s → blue led blinks (informing to push)
4.Press button and hold for 4 s → blue led blinks (informing to release)
Document version: 1.0 6