Install Guide

SENSIT SYSTEM | MANUAL
Installation SENSIT Gateway
37/118
6.3.6 SIM CARD
Insert the normal (mini) SIM card at the top of the PCB as indicated. When the SIM
card is inserted correctly it will click.
Figure 24: SIM Card installation
6.3.7 ANTENNA
The SENSIT Gateway is featured with two antennas. One for communication with the
SENSIT nodes and the other is the mobile 3G/4G antenna.
Note
Make sure your remove the
pin code from your SIM-
card e.g. by using your
mobile phone.
Note
Example of normal standard
size mini SIM card.
Figure 23: Mini SIM card
Note
SIM card must be capable
to receive and transmit SMS
messages and to transfer
Data.
Note
Data usages is normally
less than 250MB per
month.
Note
Some mobile providers
disconnect an open TCP
connection when no data
transfer take place. The
Gateway expect an
uninterrupted TCP
connection.
Note
By default every 2 minutes
a small package is
transmitted by the SIS to
verify the open TCP
connection.