Install Guide

SENSIT SYSTEM | MANUAL
Introduction
7/118
1 INTRODUCTION
The SENSIT vehicle detection system facilitates accurate measurement on
occupancy of individual parking spaces in car parks, and on-street parking spaces.
This information can be used to guide traffic to free parking spaces but can also be
used for on-street parking enforcement and overstay detection. For on-street
enforcement the number of occupied parking spaces can be compared with the
number of payments realized by the pay station. For overstay detection the system
alerts instantly a parking officer to the presence of nearby overstaying vehicles.
Based on this information you can exactly determine which space to enforce.
All the SENSIT vehicle detection sensors are featured with detection and
communicate wireless, creating their own network. The SENSIT sensors do not
require power wiring, in contrast to conventional systems that require wiring
throughout the car park and mounting onto the ceiling.
Easy installation of the sensors is guaranteed. Once installed no maintenance is
required for years. The actual status (occupancy) of the sensor is transmitted to the
Relay Node, which is part of the wireless mesh network.
Different types of ruggedly designed sensors are available to accommodate
installation in indoor car parks, on-street spaces and road surfaces.