Install Guide

SENSIT SYSTEM | MANUAL
SENSIT Interface Software
72/118
17.5.2 ENFORCEMENT
The enforcement map shows all violation and overstays of the system. This can be
showed for the whole system or per individual parking lot. At parking lot level the
user can select a bay to get some more details and also to individually deactivate a
bay.
Figure 47: Parking map, violations and overstays.
17.5.3 ANALYSIS
The analysis map shows three different views; Network-, segmentation- and sensor
view. The analysis map can be used to identify in more details possible issues with
the system or a specific sensor.
The network view indicates the uptime of every individual SENSIT component. Also
at the overview map the number of SENSIT components with uptime issue are
shown.
Also at parking lot level the individual SENSIT components are marked red when the
uptime is too low. Below an example of a just installed parking lot were all bays,
Relay Node and Gateway indicate a poor uptime.
Figure 48: Network view.
Note
The battery life of SENSIT
components with a to low
uptime of the radio network
is influenced significantly.
Thus equipment showing
up most of the time in red
in the Network Analysis
view must have your
immediate attention and
resolving these issue is
needed.
Disclaimer:
The product warranty on
SENSIT sensors voids if the
sensors are active in a
continues bad Wireless
SENSIT Network and the
Overall uptime of the
SENSIT sensor is indicating
less than 98.5%.