Install Guide

SENSIT SYSTEM | MANUAL
SENSIT Interface Software
80/118
Figure 61: Node cross check
17.7.3 NODE PRESENCE
This screen will display information on the last received message from each node
present in the network. It will outline the Node ID, type number, version and the
timestamp of the last received message.
Node presence check (min)
If a node does not respond within a certain time period (default: 720 minutes) after
transmission of the last message, the SENSIT Server will check if the node is still
available. In this menu option you can select the time after receiving the last
message (in minutes) when to send the Node presence check.
Node presence check retry
The 'Node presence check retry' specifies the number of times (default: 4) the
SENSIT Server shall try to connect to the node.
Figure 62: Node presence
In the screenshot above several nodes are listed in the node cross check.
For example node id 00.0000.72BC is a SENSIT IR (type 3109). Every different type
of node has its own Type code, see below the general use types:
Type code
Node description
000C
0017
Data Collector
SENSIT Gateway
0018
Relay Node 2G
3003
Relay Node 1G
3109
SENSIT Flush Mount or SENSIT IR
310D
SENSIT Flush Mount or SENSIT IR
310E
Electronic Parking License (EPL)
8004
WSN Display