Install Guide

SENSIT SYSTEM | MANUAL
SENSIT Interface Software
83/118
17.8.4 MONITOR CONFIGURATION
Site Name
Fill in here the site name.
Map List
Here you can load the parking lot graphic file (SVG-format) into the system and
assign it to a parking lot. The SVG-file can be created with Inkscape
(http://inkscape.org). Nedap has an extension available for Inkscape that should be
used to define where the parking bays are located on the map. See the advanced
section, chapter 18.1 for more explanation and the workflow about the Inkscape
program.
When the SVG-file is created, enter the ParkinglotID and the title. Then select the
svg-file by clicking the 'Browse'-button and click Upload' to upload the selected file
into the system.
Figure 68: Inkscape
17.8.5 OVERSTAY CONFIGURATION
The SENSIT Server can be used for overstay applications, specifically where there is
a need for a maximum time limit for free parking. The menu 'Overstay configuration'
allows you to set several overstay parameters.
Figure 69: Overstay configuration