Instruction Manual VP1001-B Safety Instructions 5287766 / Version 01.
Copyright Copyright © Nedap N.V. All rights reserved. The information in this document is subject to change without notice, it is not to be reproduced in any way, in whole or in part, without the written consent of Nedap N.V. All trademarks referenced belong to their respective owners. Disclaimer Nedap N.V. has made every effort to ensure the accuracy of the information contained in this document. However, Nedap N.V.
VP1001-B VP1001-B / Safety Instructions 5287766 / Version 01.
Content 1 Safety .................................................................................................. 3 2 Compliance .......................................................................................... 5 VP1001-B / Safety Instructions 5287766 / Version 01.
1 Safety Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual may result in serious injury or death. Keep this manual in a safe location for future reference. Symbols used in the manual Danger Indicates a hazardous situation that, if not avoided, will result in death or serious injury. Warning Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
Caution Make sure all components are installed out of reach of animals. Caution Make sure all cables are properly concealed, and form no danger for stumbling. Caution Take into account the high concentrations of ammonia when installing and maintaining the VP1001-B in pig barns.
2 Compliance FCC and ISED Compliance statement This device complies with part 15 of the FCC Rules and with RSS-210 of Innovation, Science and Economic Development Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Antennas This device may be used with the following Nedap antennas: Single Loop Walk Through, Single Loop Walk Over, VP6011, VP6012, VP6030, VP6040, VP6041, VP6042 and VP6050. Antennas VP6041 and VP6042 are identical. However, model VP6041 is adjusted for environments with lots of steel for short distances. The VP6042 is adjusted for longer distances (1 m) recognition.
