User Manual

BOOSTER 2G | USER GUIDE
Smartcard Configuration
11/27
standard-length is selected in the configuration).
Active mode
Two activation modes are possible: Switched or Always-on.
The setting can only be changed when the Booster originally was in switched mode
!!!
Switched mode is selected when the operating mode is Booster (only Driver-ID).
Switched mode (active for approx. 5 seconds)
In switched mode the booster is active for approx. 5 seconds after the booster's
button is pushed and then autmatically returns into sleep mode.
Always-on (continuously active)
In always-on mode the booster remains active. When the booster's button is pushed
the booster will read the inserted card. If a card is identified, the booster will check
every few minutes if the inserted card is still present.
RFID Configuration
ISO14443-A / MIFARE
Enable or disable the reading of ISO14443-A / MIFARE cards.
Data to read:
For ISO14443-A cards the card serial number can be read. The cascaded card serial
number (e.g. used in Mifare UltraLight cards) is also supported. For MIFARE cards also
other encrypted information from the card can be read. Select one of the following
choices:
• ISO14443-A card serial number
• MIFARE UltraLight data (see chapter 4.2.2.5 for more details)
• MIFARE Classic sector data (see chapter 4.2.2.6 for more details)
• MIFARE DESFIRE file data (see chapter 4.2.2.7 for more details)
The byte order can be set to normal or reversed.
Nedap PM
Enable or disable the reading of NEDAP PM cards. NEDAP PM cards are always
transmitted to the TRANSIT using standard-length.
EM4102 (and compatible)
Enable or disable the reading of EM4102 and compatible cards. EM4102 cards are
always transmitted to the TRANSIT using standard-length.
HID PROX
Enable or disable the reading of HID PROX cards. HID PROX cards are always
transmitted to the TRANSIT using extended-length.
HID iCLASS CSN
Enable or disable the reading of HID iCLASS cards. Only the card serial number can
be read from these cards.
ISO15693 / LEGIC Advant CSN
Enable or disable the reading of ISO15693 / LEGIC Advant cards. Only card serial
number can be read from these cards.
Note
The Nedap PM, EM4102 and
HID PRO
X are not
supported on the
Smartcard
-Booster.
Note
The EM4102 c
annot be
disabled on MTR.