User Manual

BOOSTER 2G | USER GUIDE
Smartcard Configuration
14/27
Reading MIFARE classic sector data
The Mifare Classic 1K and 4K cards are fully supported. Also other Mifare cards
which are compatible (such as Mifare Plus and SmartMX) can be used. The memory is
organized in sectors with blocks. Every block consists of 16 bytes.
Upon configuring the smartcard-booster for reading MIFARE DESFIRE cards, the
following parameters must be specified.
Sector Number
Sector number to read data from (in range from 0 .. 39).
Block Number
Block number to read data from. The block number must be in range from 0.. 3 for
the first 32 sectors. For the sectors 32 .. 39 the block number can range from 0 .. 15.
Data Length
Number of bytes to transmit. The maximum number of bytes is dependent upon the
operating-mode and frame-length settings.
Data Offset
Number of bytes to skip.
Read Key
Key A or Key B can be used to authenticate to the card.
Select which key to use and the key itself.
Example
Data to read: MIFARE Classic sector data
Byte order: Normal
Sector Number: 1
Block Number: 1
Data Length: 8
Data Offset: 2
The settings above will read the data below shown in blue.
Sector
Block
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
0
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1
x
x
D
D
D
D
D
D
D
D
x
x
x
x
x
x
2
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x