User Manual

BOOSTER 2G | USER GUIDE
Smartcard Configuration
20/27
4.4 TESTING THE CONFIGURATION
The MIFARE settings can be tested before loading it into the Smartcard-Booster
using a supported mifare reader.
From the ‘Programmer' menu choose ‘Test configuration’.
Place the Mifare card (not the config card) on the reader and click the ‘Read’ button.
The reader reads the Mifare card according to the current configuration settings.
The software displays the driver-id number as it will be identified by the TRANSIT.
Configuration Test
If the card is not read or if the wrong data is shown under DRIVER-ID then check if
the configuration settings are correct. Remember that only MIFARE cards can be
tested this way.
4.5 CONFIGURATION FILES
Your configuration can be saved into a so-called Smartcard Booster Config File
(*.sbcf). These files contain all the configuration settings as you have defined them.
Saved Config Files can be easily opened from within the File menu.