User Manual

BOOSTER 2G | USER GUIDE
Installation
4/27
2 INSTALLATION
2.1 DIMENSIONS
The Boosters are easily mounted to the inside of the car’s windshield by means of
suction cups. Users should ensure the visual contact between the Booster and any
TRANSIT reader is unobstructed with items such as stickers or metallized
windshields (see also chapter 2.3 about solar control windshields).
Note that the Booster's suction cups must be faced toward the reader to achieve
maximum reading distance.
Dimension
Length
X
111 mm
4.37 "
Width
Y
65 mm
2.56 "
Height
Z
32 mm
1.26 "
Body height H 24 mm 0.95 "
Tacho wire
wire length
1700 mm
67 "
wire thickness
2 x 0.25 mm
P
2
2 x AWG 23
Booster Dimensions
2.2 TEMPERATURE CONSIDERATIONS
The Booster is designed to operate within the extreme temperature ranges, which
often occur behind a vehicle’s windshield during the winter or summer seasons (-
20°C to 85°C / -4°F to +185°F). However the personal identification card inserted in
the Booster may not be designed to withstand such temperatures and could suffer
damage as a result.
Nedap recommends to
remove the personal identification card
when not in use.
X
Y
H
Z