User Manual

|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16
CONNECTING CUSTOMER COUNTING {OPTIONAL}
Up to 4x aisles of customer counting can be connected to the Eco Reader. Make sure to wire the
customer counting modules inside the PG antennas in the appropriate way. Connector K8 has 8x
inputs called CC1 up to CC8. For aisle 1 use CC1 and CC2, for aisle 2 use CC3 and CC4, etc. The
customer counting receivers should be connected in the right direction to properly distinguish an
incoming from an outgoing customer.
The correct connection of the customer counter inputs can be determined in test mode of the Eco
Reader. In this test mode the alarm light of the antennas will blink 4x slowly when the customer
counter detected an incoming customer, and they will blink 8x fast when it detected an outgoing
customer.
An example of the customer counting wiring is included in the appendix.