User Manual

|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18
CONNECTING TO USB {OPTIONAL}
The Eco Reader can be connected to a pc or laptop with an USB cable. On rev.A of the PCB a micro-
usb connector should be used on the Eco Reader, on rev.E of the PCB a type B usb connector should
be used. This USB cable is delivered together with the Eco Reader.
Figure 14 USB Connector
A driver is required to communicate with the Eco Reader. This driver for windows is available on the
support site of Nedap Librix , but will be available natively for most other OS, like mac, linux. In
windows7 an automatic search of the driver on the internet, will also find the correct driver.
Once connected and installed the Eco Reader will be available on a virtual com port. To this a
connection can be made with programs like rftest.lite or any other Nedap Librix’ software. To be
able to configure all the settings of the Eco Reader, rftest.lite version 3.0.0 or higher is needed.