User Manual
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
21
In the bottom-left part of the home page, the ‘Reset’ and ‘Update’ buttons are shown.
Figure 17 - Customer counter reset and update
When ‘Reset’ is clicked, the customer counter values go back to zero. The ‘Update’ button forces a
refresh of the customer counter values.
In the bottom-right part of the home page a ‘world-globe’ icon is shown when the Eco Reader has a
connection to librixonline.com. When you do not see this, but there should be a connection, contact
your local IT specialist to resolve the network problems you are experiencing.
Figure 18 - World globe indiciating librixonline.com connection
In the top-left corner of the webpage the Eco Reader ‘leaf’ indicates if the Security Antennas are
enabled or disabled. When the radiation waves are coming out of the leaf, the antennas are working.
Figure 19 - 'Radiating' leaf means gates are enabled
Settings page
By clicking the ‘Settings’ tab in the top-right corner, the settings and other information of the Eco
Reader is displayed. The settings are grouped in a ‘tree’ shape, and can be expanded by clicking the
‘+’ sign in front of an option. The important settings are explained in the following paragraphs.
When a setting is changed, a ‘disk’ icon appears next to the setting. This icon has to be clicked to
save the setting.
NETWORK SETTINGS
By default the Eco Reader will use DHCP to obtain an IP-address on the local network. If a static IP-
address is required, the Eco Reader must be re-configured. Rftest.lite can be used to find an Eco
Reader on the network. Rftest.lite needs to run on a windows computer that is connected to that
network.
Finding the Eco Reader on the network
The following steps explain how the Eco Reader can be discovered on the network with rftest.lite.
Although version 3.0.0 is required for configuring all settings, discovering can already be done with
version 2.1.0 or higher of rftest.lite