User Manual

||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |
23
6. All discovered Eco Readers will be displayed in the list, together with their IP-address,
hostname, mac address, etc. Double click on the Eco Reader of your interest, to select it.
7. Once selected press ‘Test’ in the ‘Communication Setup’ to test the communication with the
Eco Reader.
8. When ‘RfidReader not active’ is reported, there is probably a problem in your network.
Contact your local IT specialist for assistance.
Configuring the network settings with a webpage
1. Go to the Settings > Communication > Tcp/Ip page
2. On the right part, the network name, DHCP setting, fixed IP-address, and all other network
settings can be changed. Please consult your local IT specialist for the right settings for your
network.
The other ‘Communication’ subpages, like ‘Udp’, ‘Webserver’, and ‘RS232’, are internal used
variables, which in 99.9% of the cases can be left to their default values. Changes should only be
done by a qualified person. Please contact Nedap Librix if you need assistance on these settings.
Configuring the IP-address with rftest.lite
1. Make sure there is a working connection between rftest.lite and the Eco Reader.
2. Click the ‘tuning’ button on the ‘Communication Setup’ windows of rftest.lite
3. Go to the first tab ‘IP Networking’. Over there you can find DHCP, and fixed IP-address
settings.