User Manual

||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |
31
appendix b for instructions on how to manually determine the optimal cable length
CONVERSION FROM DVD TO ECOREADER
When a DVD RFID Reader needs to be replaced with an Eco Reader, it is possible that you need to
change the cable length. It is advised to do the following:
1. Exchange the DVD for an Eco Reader and perform tests to see if the existing cables function
within expectations.
2. If the performance is not satisfactory, change the cable length by adding or removing some
cable. In the table below you can find the amount of cable that needs to be added or
removed (depending of what fits best in the situation).
3. In case the performance is still not satisfactory perform the measurement steps in appendix
B.
USED CABLE
ADD OR REMOVE
RG58
3.5m
Belden 9907
4.18m