User Manual

ManualsBrandsNederlandsche Apparatenfabriek NEDAP ManualsElectronicsInductive RFID card Reader operating on 13.56 MHz

|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

INTRODUCTION

BEFORE YOU START

We would like to thank you for buying a Nedap Librix Eco Reader RFID system. The Eco Reader can

be used in combination with Nedap Librix anti-theft antennas, Nedap Librix Intelligent shelves and

Nedap Librix Autosort products. The Eco Reader is specially developed to have a low energy

consumption during operation, and the additional capability to switch its output power off at times

when it is not needed.

Some of its functions are:

 Reads ISO15693 and ISO18000-3.1 compatible RFID tags

 Has an internal 4 channel multiplexer, which allows it to connect to up to four

50Ω@13.56Mhz inductive loop antennas. Optionally this can be expanded by using

splitters, or an external multiplexer.

 Can connect 4x customer counting aisles

 Energy saving module

 Librixonline.com connectivity

 Internal webpage for easy configuration of settings

UNPACKING

Check your Eco Reader product box for the following items. If there are any items missing, contact

the local dealer where you purchased the product. The illustrations in this manual may differ from

the actual product and item.

1. An C5 power cable with European plug is delivered with the Eco Reader. Plugs for other

countries should be ordered separately.