User Manual
Table Of Contents
- Introduction:
- Product overview
- Preparing the installation
- Executing the installation
- Configuring the installation
- Integrating the installation with other systems
- Servicing the installation
- Troubleshooting
- Regulatory information
- About Nedap
Page of 11 43 Manual FC-line
Add-ons
Metal Detection
The Renos Metal Detection unit (#9563717) can be used to detect foil-lined bags, which are sometimes used
by thieves to prevent the RF tags from being read by the detection system or reader. With metal detection, we
can detect metal objects and provide a discrete alarm to the store employees.
Restrictions for metal detection
You need a minimum of 2 gates with Metal Detection units to work.
Only possible when there are no moving doors with metal (i.e. an aluminum frame around the
door).
Please note that for the connection of the Metal Detection in the FC-line antenna a longer
connection cable is needed (800 mm / 2.6 ft).
RF security dashboard
The Renos platform has a built-in RF security dashboard. It can be enabled by entering a license key during the
configuration wizard. The customer can then visit the dashboard via the web browser. To make this work, the
Renos system should be either connected to the customer network, or a stand-alone set-up with a router
should be made.