User Manual
Table Of Contents
- Introduction:
- Product overview
- Preparing the installation
- Executing the installation
- Configuring the installation
- Integrating the installation with other systems
- Servicing the installation
- Troubleshooting
- Regulatory information
- About Nedap
Page of 18 43 Manual FC-line
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Mount on the side of the door frame
The drawing below specifies the mounting of the FC-line antenna on the side of the door frame using the wall
mount bracket included in the box.
Bracket RVS
Bracket 1 (included in the box)
Bracket 2 (included in the box)
EPDM rivet blind + Washer M8 DIN9021 + Distance bracket 25mm / 0.98"
Washer M8
Bolt M8 x 50
Bolt M8 x 25
Washer M8
Nut M8
Distance between antennas 1800 mm / 5.9 ft - 2200 mm / 7.2 ft (2000mm / 6.6 ft recommended).