User Manual
Table Of Contents
- Introduction:
- Product overview
- Preparing the installation
- Executing the installation
- Configuring the installation
- Integrating the installation with other systems
- Servicing the installation
- Troubleshooting
- Regulatory information
- About Nedap
Page of 21 43 Manual FC-line
1.
2.
3.
Power Inserter OUT to Renos IN
Renos OUT to the next Renos IN
Filters
Filters can be ordered as spare part with Nedap. Please refer to the Nedap Retail Portal for more
information.
Ethernet cables
Maximum length and type of Ethernet cable
The maximum data communication length for an Ethernet cable is 100 meter (328 ft.). Therefore we
recommend the following maximum distances:
The maximum cable length in between two Renos units is 100 meter (328 ft.) - even if there is
a Power Inserter in between.
The maximum cable length from the Power Inserter to the last Renos unit powered by that
Power Inserter is also 100 meter (328 ft.)
Please use Ethernet Cat. 5 cable or better and make sure to test every Ethernet cable for correct
connections and twisting of all 4 pairs (8 wires) with an Ethernet cable tester. This is to make sure
that the system can function correctly.