User Manual
Table Of Contents
- Introduction:
- Product overview
- Preparing the installation
- Executing the installation
- Configuring the installation
- Integrating the installation with other systems
- Servicing the installation
- Troubleshooting
- Regulatory information
- About Nedap
Page of 27 43 Manual FC-line
1.
2.
3.
If the Renos unit has a firmware error, the rightmost three LEDs (4, 5 and 6) will remain off when the
unit is powered. This can be solved by using a 'Local - single unit' firmware update, as is described
later on in this manual.
Place cover
Place the cover over the electronic unit as shown in the image below.
Place the M4 x 12 bolts (2x) at the top
Hang the cover as shown
Fix the cover from below using M4 x 16 bolts (2x)