User's Manual

VP 1004 - ISO Reader Multiplexer - Quick start 9- 2011 Doc.part. no. 5277434 45 .01 B 1/ 4
Quick start
VP 1004 ISO Reader Multiplexer
The Velos VP 100 4 is a Velos component t hat is used to identify animals . The VP 100 4 must be
installed in a V - box. A VP 1004 is connected to the Velos CAN - bus and controlled by a VP8001 ( VPU ).
Inputs / Outputs / Antennas
- 8 antennas, auto scanning one by one (max 10x VP1004 per VP 8001)
- 2 outputs available to act ivate e.g. lights and 2 inputs for reading e.g. switches
FCC ID: CGDVELOS5 and IC: 1444A - VELOS5
Compliance statement (pa rt15.19)
This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference receive d, including interference that may cause undesired operation.
Déclaration Conformité
Cet appareil se conforme aux normes RSS210 exemptés de license du Industry Canada. L'opération est soumis aux deux
conditions suivantes:
(1) cet appareil ne doit causer au cune interférence, et
(2) cet appareil doit accepter n'importe quelle interférence, y inclus interférence qui peut causer une opération non pas vou lu
de cet appareil.
Warning (part15.21)
Changes or modifications not expressly approved by party responsibl e for compliance could void the user s authority to operate
the equipment.
This in particular is applicable for the antenna which can be delivered with the VP4001 System.
V P8001 To PC (LAN ethernet)
Po wer
Supply
VP2001
max 3m
V P1004
Antenna 1
-
8
Next VP1004
V P1004
Next VP1004
Antenna 17
-
24
V P1004
Antenna 9
-
16
V P1004
Antenna 25
-
32