User's Manual

- 13 -
6.5 PL Alarm TAB
Alarm Enable is default active. When no lamp and buzzer
signal must be given it must be switched off. Remember that when
switched off, EASi/Net™ will NOT register events.
Buzzer mode: select between off, whine or continuous
Lamps Pulse mode: is the hold time of the lamp after label is not
in the detection eld
6.6 ASC
With the ASC Range, the sensitivity can be controlled. If there
is a situation that less sensitive is wanted, the ASC range can be
increased (larger number). To decrease (lower sensitive) the
detection range default ASC=100.
Long term valids and log term Q give an indication in the stability
of the unit in this environment. If both are 0 and stay 0, the unit
function stable.
6.7 Spectrum analyzer
Using View Spectrum will open an extra window with a spectrum analyser. The same window can be selected with the TAB
Spectrum.