User's Manual
- 15 -
7.Systemconguration
The new X2 electronics can be used as an internal in an antenna or external electronics. By use of an power inserter, 6
electronics can be connected.
An NCC MK2 can communicate with up to a maximum of 24 X2 electronics.
Table 1
Number of antennas Non-connected systems Connected systems
1 - 6 1 power inserter 1 NCC
7 - 12 1 NCC, 1 Power Inserter same as non-connected, plus modem or LAN
13 - 18 1 NCC, 2 Power Inserters same as non-connected, plus modem or LAN
19 - 24 1 NCC, 3 Power Inserters same as non-connected, plus modem or LAN
25 - 30 2 NCC’s, 3 Power Inserter same as non-connected, plus modem or LAN
31 - 36 2 NCC’s, 4 Power Inserters same as non-connected, plus modem or LAN
37 - 42 2 NCC’s, 5 Power Inserters same as non-connected, plus modem or LAN
43 - 48 3 NCC’s, 5 Power Inserters same as non-connected, plus modem or LAN
49 - 54 3 NCC’s, 6 Power Inserters same as non-connected, plus modem or LAN
55 - 60 3 NCC’s, 7 Power Inserters same as non-connected, plus modem or LAN
61 - 66 4 NCC’s, 7 Power Inserters same as non-connected, plus modem or LAN
etc. etc. etc.
7.1Mediumscaleinstallationexample
When using a 4 output NCC, a maximum of 24 PCB’s can be connected. Below an example of a system with 19 antennas and
48 antennas.
NCC MK2
Power
Inserter
Power
Inserter
Power
Inserter