User's Manual
- 4 -
1. Introduction
• System adapt to any environment
• Cognitive (Radio) system (Software Dened Radio)
• It monitors the utilization of the RF spectrum in the neighborhood, and congures it self for best performance
• Quickly and easily upgradeable with enhanced features
• Can be recongured “on-the-y”: Detection or label analyzer
Software radio is the art and science of building radios using software. By radio, we
mean any kind of device that intentionally transmits or receives signals in the radio
frequency (RF) part of the electromagnetic spectrum.
Given the constraints of today’s technology, there is still some RF hardware
involved, but the idea is to get the software as close to the antenna as is feasible.
Ultimately, we’re turning hardware solutions into software solutions.
The label analyzer has an increased detection range, and has a quick detection
and deactivation including important information like accurate Q and frequency
measurement. It can also measure differences in deactivation levels.
The detection system can function without NCC and can be switched into a master.
1.1 Communication functions
Communication remote assistance or data delivery is done by use of an NCC MK2 master unit. There are no
onboard communication functions. With a combination of customer counting and above capabilities you can use,
alter and monitor remote-diagnostics, rmware-upgrade and system
congurations.
To communicate with the Nedap Conguration Manager, a connection through
USB has to be established. This is a connection between the onboard Mini-USB
connector K210 and an USB connector in the PC or laptop.
1.2 Customer Counting
The X2 PCB has Customer Counting possibilities for one aisle. Gathered data can be shown on the Easinet™.
1.3 Key Switch
The X2 can be tted with an Key Switch. The switch has to be connected to K208
(for connector images, see 1.2 Customer Counting).
1.4 Crying Funtion
X2 electronics are standard tted with a buzzer for the crying function. The buzzer
will be connected to connector K206.
The buzzer is tted to a mounting plate.
External
USB(mini) cong port
K210