User's Manual
- 5 -
1.5 Benets
• 1 aisle CC option (K208)
• 1 opto input for key switch (K208)
• Standard delivered with a buzzer for use of the crying function option (K206)
• Conguration Manager connection by USB
1.6 Software version
The latest version of the Conguration Manager must be installed for use with the new electronics The sweep time has
changed, there fore all units in a system must have rmware version 2.xxx or higher!
X2
Unit X2
Cable 2 FR + MD
A
C
-
A
YYYY-MM-DD
Documentation released
-
Ref.Nr.
REV.
DATE
DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
3
2
5
6
7
8
A3
8017328
N/A
A.01
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
10.01 OF 1
1:2
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
??
??
??
DRW:
CHCK:
YYYY-MM-DD
YYYY-MM-DD
YYYY-MM-DD
DSGN:
A
YYYY-MM-DD
Documentation released
Ref.Nr.
REV.
DATE
DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
4
3
2
1
F
E
D
C
B
A
1
2
3
4
A4
8017336
N/A
A
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
N/A
± 0.2
± 1°
1:1
10.01 OF 1
DESCRIPTION
LIN.
ANG.
DSGN:
??
??
DRW:
CHCK:
2009-MM-DD
2009-MM-DD
2009-MM-DD
??
Buzzer with cable
A
YYYY-MM-DD
Documentation released
Ref.Nr.
REV.
DATE
DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
4
3
2
1
F
E
D
C
B
A
1
2
3
4
A4
4092201-rs
N/A
A
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
N/A
± 0.2
± 1°
1:1
10.01 OF 1
DESCRIPTION
LIN.
ANG.
DSGN:
??
??
DRW:
CHCK:
2009-MM-DD
2009-MM-DD
2009-MM-DD
??
A
YYYY-MM-DD
Documentation released
Ref.Nr.
REV.
DATE
DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
F
E
D
C
B
A
1
2
3
4
A4
4092201-rs
N/A
A
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
N/A
± 0.2
± 1°
1:1
10.01 OF 1
DESCRIPTION
LIN.
ANG.
DSGN:
??
??
DRW:
CHCK:
2009-MM-DD
2009-MM-DD
2009-MM-DD
??
2x M3x10 2x M4x10
A
YYYY-MM-DD
Documentation released
Ref.Nr.
REV.
DATE
DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
4
3
2
1
F
E
D
C
B
A
1
2
3
4
A4
4092201-rs
N/A
A
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
N/A
± 0.2
± 1°
1:1
10.01 OF 1
DESCRIPTION
LIN.
ANG.
DSGN:
??
??
DRW:
CHCK:
2009-MM-DD
2009-MM-DD
2009-MM-DD
??
2x M3x6
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Art.No: 7706707
NC
NC
K102
Pin 2 = - buzzer (black)
Pin 1 =
+
buzzer (red)
Sync in
Sync out
Deact. buzzer
Keyswitch
Customer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB
External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
(Not included)
T5276-659
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
6
3
2
1
F
E
D
C
B
A
5
6
7
8
A3
QUICK REFERENCE X2
5276659
c
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
1
45.01 OF 2
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
2009-12-18
2009-10-26
2009-10-26
DSGN:
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Art.No: 7706707
NC
NC
K102
Pin 2 = - buzzer (black)
Pin 1 =
+
buzzer (red)
Sync in
Sync out
Deact. buzzer
KeyswitchCustomer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB
External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
(Not included)
T5276-659
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
3
2
1
F
E
D
C
B
A
5
6
7
8
A3
QUICK REFERENCE X2
5276659
c
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
1
45.01 OF 2
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
2009-12-18
2009-10-26
2009-10-26
DSGN:
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Art.No: 7706707
NC
NC
K102
Pin 2 = - buzzer (black)
Pin 1 =
+
buzzer (red)
Sync in
Sync out
Deact. buzzer
KeyswitchCustomer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB
External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
(Not included)
T5276-659
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
3
2
1
F
E
D
C
B
A
5
6
7
8
A3
QUICK REFERENCE X2
5276659
c
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
1
45.01 OF 2
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
2009-12-18
2009-10-26
2009-10-26
DSGN:
01
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Pin 2 = - buzzer (black)
Pin 1 =
+
buzzer (red)
Sync in
Deact. buzzer
Keyswitch
Customer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB
External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
(Not included)
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
6
3
2
1
F
E
D
C
B
A
5
6
7
A3
QUICK REFERENCE X2
5276659
ARTICLE NUMBER
ISO A
GROENLO HOLLAND
SHEET:
4
7
5
4
3
2
1
45.01 OF 2
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
DSGN:
A
-
A
YYYY-MM-DD
Ref.Nr.
REV.
ROUGHNESS ACC.
3
2
1
4
5
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Pin 2 = - buzzer (black)
Pin 1 =
+
buzzer (red)
Sync in
Deact. buzzer
Customer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB
External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K208
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
6
3
2
1
F
E
D
C
B
A
5
6
7
A3
QUICK REFERENCE X2
5276659
ARTICLE NUMBER
ISO A
GROENLO HOLLAND
SHEET:
4
7
5
4
3
2
1
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
DRW:
CHCK:
DSGN:
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Pin 2 = - buzzer (black)
Pin 1 =
+
buzzer (red)
Sync in
Deact. buzzer
Keyswitch
Customer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB
External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
6
3
2
1
F
E
D
C
B
A
5
6
7
A3
QUICK REFERENCE X2
5276659
ARTICLE NUMBER
ISO A
GROENLO HOLLAND
SHEET:
4
7
5
4
3
2
1
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
DSGN:
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Art.No: 7706707
NC
NC
K102
Pin 2 = - buzzer (black)
Pin 1 =
+
buzzer (red)
Sync in
Sync out
Deact. buzzer
Keyswitch
Customer
counting
K206
K3
K101
K210
SW3
K209
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
(Not included)
T5276-659
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
5
6
7
8
A3
QUICK REFERENCE X2
5276659
c
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
45.01 OF 2
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
2009-12-18
2009-10-26
2009-10-26
DSGN: