User's Manual

- 9 -
X2
Unit X2
Cable 2 FR + MD
A
C
- A YYYY-MM-DD Documentation released -
Ref.Nr. REV.
DATE
DESCRIPTION APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
3
2
5
6
7
8
A3
8017328
N/A
A.01
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
10.01 OF 1
1:2
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
??
??
??
DRW:
CHCK:
YYYY-MM-DD
YYYY-MM-DD
YYYY-MM-DD
DSGN:
A YYYY-MM-DD Documentation released
Ref.Nr.
REV. DATE DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
4
3
2
1
F
E
D
C
B
A
1
2
3
4
A4
8017336
N/A
A
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
N/A
± 0.2
± 1°
1:1
10.01 OF 1
DESCRIPTION
LIN.
ANG.
DSGN:
??
??
DRW:
CHCK:
2009-MM-DD
2009-MM-DD
2009-MM-DD
??
Buzzer with cable
A YYYY-MM-DD
Documentation released
Ref.Nr.
REV.
DATE
DESCRIPTION APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
4
3
2
1
F
E
D
C
B
A
1
2
3
4
A4
4092201-rs
N/A
A
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
N/A
± 0.2
± 1°
1:1
10.01 OF 1
DESCRIPTION
LIN.
ANG.
DSGN:
??
??
DRW:
CHCK:
2009-MM-DD
2009-MM-DD
2009-MM-DD
??
A
YYYY-MM-DD Documentation released
Ref.Nr.
REV.
DATE
DESCRIPTION APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
F
E
D
C
B
A
1
2
3
4
A4
4092201-rs
N/A
A
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
N/A
± 0.2
± 1°
1:1
10.01 OF 1
DESCRIPTION
LIN.
ANG.
DSGN:
??
??
DRW:
CHCK:
2009-MM-DD
2009-MM-DD
2009-MM-DD
??
2x M3x10 2x M4x10
A
YYYY-MM-DD
Documentation released
Ref.Nr.
REV.
DATE
DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
4
3
2
1
F
E
D
C
B
A
1
2
3
4
A4
4092201-rs
N/A
A
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
N/A
± 0.2
± 1°
1:1
10.01 OF 1
DESCRIPTION
LIN.
ANG.
DSGN:
??
??
DRW:
CHCK:
2009-MM-DD
2009-MM-DD
2009-MM-DD
??
2x M3x6
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Art.No: 7706707
NC
NC
K102
Pin 2 = - buzzer (black)
Pin 1 = + buzzer (red)
Sync in Sync out
Deact. buzzer
Keyswitch Customer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB
External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
(Not included)
T5276-659
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
6
3
2
1
F
E
D
C
B
A
5
6
7
8
A3
QUICK REFERENCE X2
5276659
c
ARTICLE NUMBER REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
1
45.01 OF 2
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
2009-12-18
2009-10-26
2009-10-26
DSGN:
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Art.No: 7706707
NC
NC
K102
Pin 2 = - buzzer (black)
Pin 1 = + buzzer (red)
Sync in Sync out
Deact. buzzer
Keyswitch Customer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
(Not included)
T5276-659
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
3
2
1
F
E
D
C
B
A
5
6
7
8
A3
QUICK REFERENCE X2
5276659
c
ARTICLE NUMBER REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
1
45.01 OF 2
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
2009-12-18
2009-10-26
2009-10-26
DSGN:
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Art.No: 7706707
NC
NC
K102
Pin 2 = - buzzer (black)
Pin 1 = + buzzer (red)
Sync in Sync out
Deact. buzzer
Keyswitch Customer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
(Not included)
T5276-659
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
3
2
1
F
E
D
C
B
A
5
6
7
8
A3
QUICK REFERENCE X2
5276659
c
ARTICLE NUMBER REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
1
45.01 OF 2
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
2009-12-18
2009-10-26
2009-10-26
DSGN:
01
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Pin 2 = - buzzer (black)
Pin 1 = + buzzer (red)
Sync in
Deact. buzzer
Keyswitch Customer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
(Not included)
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
6
3
2
1
F
E
D
C
B
A
5
6
7
A3
QUICK REFERENCE X2
5276659
ARTICLE NUMBER
ISO A
GROENLO HOLLAND
SHEET:
4
7
5
4
3
2
1
45.01 OF 2
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
DSGN:
A
- A YYYY-MM-DD
Ref.Nr. REV.
ROUGHNESS ACC.
3
2
1
4
5
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Pin 2 = - buzzer (black)
Pin 1 = + buzzer (red)
Sync in
Deact. buzzer
Customer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB
External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K208
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
6
3
2
1
F
E
D
C
B
A
5
6
7
A3
QUICK REFERENCE X2
5276659
ARTICLE NUMBER
ISO A
GROENLO HOLLAND
SHEET:
4
7
5
4
3
2
1
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
DRW:
CHCK:
DSGN:
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Datacom error (Red)
Power on (Green)
CC 2 (Yellow)
CC 1 (Yellow)
Alarm (Yellow)
No function (2)
50
Ω (1)
ON
OFF
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Pin 2 = - buzzer (black)
Pin 1 = + buzzer (red)
Sync in
Deact. buzzer
Keyswitch Customer
counting
K206
K3
K101
K210
SW3
K209
Keyswitch
+3V3
R474
100
Ω
GND
+3V3
IN KSW
X2 PCB
External
switchbox
SW
1
2
3
4
5
10K
Ω
Circuit diagram
K208
GND
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
6
3
2
1
F
E
D
C
B
A
5
6
7
A3
QUICK REFERENCE X2
5276659
ARTICLE NUMBER
ISO A
GROENLO HOLLAND
SHEET:
4
7
5
4
3
2
1
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
DSGN:
Pin 1 = Gnd
Pin 2 = +33Volt in
K1
(YELLOW)
(Not included)
Master/slave switch
Antenna
(TX-out)
USB (mini) cong port
Art.No: 7706707
NC
NC
K102
Pin 2 = - buzzer (black)
Pin 1 = + buzzer (red)
Sync in Sync out
Deact. buzzer
Keyswitch Customer
counting
K206
K3
K101
K210
SW3
K209
(BLUE)
(RED)
(GREEN)
+ 12V for sensors
CC sensor 2
CC sensor 1
Gnd
K211K208
(Not included)
T5276-659
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
5
6
7
8
A3
QUICK REFERENCE X2
5276659
c
ARTICLE NUMBER REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
45.01 OF 2
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
CB
CB
CB
DRW:
CHCK:
2009-12-18
2009-10-26
2009-10-26
DSGN:
3. PCB Components overview
3.1 Connector overview
3.2 LED overview
Power on(Green)
CC 1(Yellow)
CC 2(Yellow)
Datacom error(Red)
Alarm(Yellow)
50
Ω (1)
ON
OFF
No function(2)