Item Brochure

Nedo ACCEPTOR
M
Sturdy laser receiver with easy-to-view display for use with construction machinery.
When used with a rotating laser, the new Nedo ACCEPTOR
M
excavator receiver
accurately shows whether the excavator blade is above, at or below the required
height. Large, bright LEDs make it easy to view the display from the excavator cab.
The switchable tilt compensation accounts for tilting of the dipper arm up to an
angle of 30°. In this way the ACCEPTOR
M
reliably and accurately shows the position
of the excavator blade in relation to the required height
Features:
– Large detector field with a length of 190 mm
– 220° reception angle for reliable reception of the laser beam
– Very sturdy design
– Splashproof and dustproof in accordance with IP 65
– Firmly attached to the dipper arm by means of 12 very strong magnets
– Rubber studs to prevent slipping
– 3 precision levels with resolutions of 4 mm, 8 mm or 12 mm
– Very bright LEDs for easy viewing from the cab
– Tilt compensation up to 30° for greater precision even when the dipper arm is inclined
– Deactivatable signal tone
– Transport case included
– Suitable for all rotating lasers with wavelengths from 600 nm to 780 nm
Nedo ACCEPTOR
M
Ref.-No. 430 335
Accuracy ± 0.157’’, ± 0.315’’ and ± 0.472’’
± 4 mm, ± 8 mm and ± 12 mm
Working range Ø 3280 ft. / 1000 m (depends on laser)
Reception angle 220°
Length of detector field 7.48’’ / 190 mm
Protection class IP 66
Operating temperature 14°F to 122°F / -10°C to +50°C
Power supply 1 x 1.5 V mono-cell
Operation duration approx. 45 h
ACCEPTOR
M
Tilt compensation
The Nedo ACCEPTOR
M
excavator receiver has a tilt
compensation feature to accurately show the position
of the excavator blade even when the dipper arm is in-
clined. The tilt of the dipper arm can be compensated
up to an angle of 30°, allowing more precise work.