Instructions

31
3. Make sure that the screen is at
least +15 °C, as the adhesive
pads do not work correctly at
lower temperatures. If neces-
sary, heat the windscreen using
the vehicle’s fan or (very care-
fully) with a hair-dryer.
4. Remove the protecve lm
from the 4 adhesive pads and
press the parking disc rmly
against the windscreen for
about 30 seconds. Do not press
against the middle of the back.
Then check from the outside
that all 4 adhesive pads are
scking to the screen well.
5. Your PARK LITE is now in-
stalled and ready for use.