Installation Instructions

GroupDisplay
Whenonmultiplegroupdisplay,thetriggerwill
switchtosinglegroupdisplaywhenyouquick
pressthe“”button.Itwillswitchbacktothe
multiplegroupdisplayifyoupressthebuttonagain.
5.Mode
ModeSwitch
Chooseonegroup(demo:GroupA)andpressthe“”
buttontoswitchmodeinthefollowingorder:
TTL→M→OFF.
Inthismode,thetriggercanadjusttheflash
outputbetween-3and+3in1/3stopincrements.
Atthelevelof0,therewillbenoexposurecompensation.
ChooseaspecificgroupandrotatetheSettingDialto
changethecompensationlevel:-3.0、-2.7....0.0.....+3.0、+2.7....
ExposureCompensationSetting
7 8
T
T
T
Zo om
AU TO
T
Zo om
AU TO
TT L
AsTransmitterorReceiver
Thetriggerwillworkastransmitterwhenyoupress
the“”buttonforthreesecondsuntilthesymbol
“T”appearsonthedisplay.Itwillturnintoareceiver
ifyoupressthebuttonagainfor3secondsuntilthe
“R”lettershowsonthedisplay.