Installation Instructions

RestoreDefaultSetting/HighSpeedSync
Thetriggerwillrestoretodefaultsettingswhenthe
Function2andFunction3buttonarepressedtogether
forthreeseconds.ToactivatetheHSSfunction,please
adjusttomainmenupageandpresstheFunction2
buttonuntilthe“ ”symbolappearsonthedisplay.
T
ModellingLampControl
Whennospecificgroupischosen,thetriggercanturn
on/offallmodellinglampswhenyouquickpressthe
“Function4”button.Whencontrollingaspecificgroup
oflights,pleasequickpressthe“ Function4”buttonto
changetheirlightintensityfromLevel1toLevel6.(The
modellinglampswithinthegroupcanallbeturnedoff
bypressingtheFunction4buttonfor3seconds.)
ThelightintensitylevelonlyfitsthatofQ5TTLstrobelight.
ZoomSetting
Quickpressthe“ Function1”button.Thenchoosea
specificgroupandrotatetheSettingDialtochange
zoomsettings:auto/20-200mm.ToexittheZoom
Settingpage,pleasequickpressthe“ Function1”
buttonagain.
Thetriggerfeatures32channels,availableforswitchfromChannel01toChannel32.
Pleasemakesurethatthetransmittingandreceivingdevicesareonthesamechannel.
Channel/TestFlash
Pressthe“ Function1”buttonfor3seconds.Thenyou
canrotatetheSettingDialtochooseasuitablechannel.
Thetriggercanmakeaflashlightfiretestflashwhenyou
pressthe“ ”button.
T
9 10
T
T
Zo om 20
Zo om AU TO
Zo om AU TO
Zo om AU TO
Zo om AU TO