Operation Manual

8
Optional accessories
You can buy optional accessories from your after-sales service
or from specialist retailers. A comprehensive range of products
for your appliance can be found in our brochures or on our
home page.
Before using the appliance for the first time
In this section, you can read about
ʋ How to set the clock after connecting up your appliance
ʋ How to clean your appliance before using it for the first time
Setting the clock
Note: When you press the .- clock function button, you have
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
¯:¯¯ flashes in the clock display.
1. Briefly press the .- clock function button to go to the
setting mode.
The
.- and  symbols light up. ³:¯¯ appears in the
clock display.
2. Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.
Changing the clock
To subsequently change the time, press the
.-clock function
button repeatedly until the
.- and  symbols light up again.
Change the time with the rotary selector.
Cleaning the appliance
Clean your appliance before using it for the first time.
1. Remove the accessories from the cooking compartment.
2. Completely remove any residual packaging (e.g. chips of
polystyrene) from the cooking compartment.
3. Clean the accessories and cooking compartment with hot
soapy water (see section: Cleaning and care).
4. Heat with  Top/bottom heat at 240 °C for 60 minutes.
5. Afterwards, wipe the cooled cooking compartment with hot,
soapy water.
6. Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you can read about
ʋ how to switch your appliance on and off
ʋ how to select an operating mode and temperature
ʋ how you can change the basic settings
ʋ when your appliance switches off automatically
Switching on the appliance
1. Turn the operating mode selector until the desired operating
mode is selected.
A default temperature appears on the temperature display.
2. Turn the temperature selector to change the default
temperature.
Optional accessories Ordering no.
Mega system steamer N8642X3
Universal pan, enamelled Z1232X3
Universal pan, non-stick Z1233X3
Universal pan with wire insert Z1242X3
Roasting pan, enamelled Z1272X0
Baking tray, aluminium Z1332X0
Baking tray, enamelled Z1342X0
Baking tray, non-stick Z1343X0
Pizza tray Z1352X0
Baking and roasting shelf Z1432X3
Roasting tray, enamelled, two-piece Z1512X0
CLOU® 3x telescopic shelf Z1742X2
CLOU® 4x telescopic shelf with full exten-
sion
Z1755X2
Bread-baking stone Z1912X0
Optional accessories Ordering no.