Assembly & Installation Instructions
Table Of Contents
- Oven
- en
- Table of contents
- 1 Safety
- 2 Preventing material damage
- 3 Environmental protection and saving energy
- 4 Familiarising yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Basic operation
- 7.1 Switching on the appliance
- 7.2 Switching off the appliance
- 7.3 Residual heat indicator
- 7.4 Setting the type of heating and temperature
- 7.5 Changing the temperature
- 7.6 Changing the type of heating
- 7.7 Pausing operation
- 7.8 Cancelling operation
- 7.9 Viewing the current temperature
- 7.10 Displaying information
- 8 Time-setting options
- 9 Childproof lock
- 10 Rapid heat-up
- 11 Sabbath mode
- 12 Basic settings
- 13 Cleaning and servicing
- 14 Cleaning functions
- 15 Rails
- 16 Appliance door
- 17 Troubleshooting
- 18 Disposal
- 19 Customer Service
- 20 How it works
- 21 Installation instructions
- 21.1 General installation instructions
- 21.2 Appliance dimensions
- 21.3 Installation below a worktop
- 21.4 Installation underneath a hob
- 21.5 Installation in a tall unit
- 21.6 Installing two appliances on top of each other
- 21.7 Corner installation
- 21.8 Electrical connection
- 21.9 Installing the appliance
- 21.10 Removing the appliance
en Sabbath mode
14
11 Sabbath mode
You can set a cooking time of up to 74hours using
Sabbath mode. You can use top/bottom heating to
keep food warm between 85°C and 140°C during
this time without having to switch the appliance on or
off.
11.1 Starting Sabbath mode
Notes
¡ If you open the appliance door during operation, the
appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again.
¡ Once you have started the operation, you cannot
change any settings or pause operation.
Requirement:Sabbath mode must be activated in "Fa-
vourites" in the basic settings.
→"Basic settings", Page14
1.
Press to switch the appliance on.
2.
Use or to select "Sabbath mode".
3.
Use to navigate to the next row.
4.
Use or to select the temperature.
5.
Use to navigate to the next row.
6.
Use or to select the cooking time.
7.
Press to start Sabbath mode.
a The cooking time appears on the display. The cook-
ing time counts down.
8.
Once the cooking time has elapsed, an audible sig-
nal sounds. A note appears on the display confirm-
ing that the operation has finished. The appliance
stops heating up and responds again as usual out-
side of Sabbath mode.
‒ Press to switch the appliance off.
The appliance automatically switches off after ap-
prox.10to 20 minutes.
11.2 Cancelling Sabbath mode
▶
Press to cancel Sabbath mode.
12 Basic settings
You can configure the appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting Selection
Language See selection on the appliance
Time 00:00 - 23:59
Date Day, month and year
Favourites
→"Changing your
favourites",
Page15
Set the heating functions that
you want to appear in the heat-
ing functions menu
Audible signal dura-
tion
¡ Short
¡ Medium
¡ Long
Button tone ¡ Off (except for )
¡ On
Display brightness 5 settings
Clock display ¡ Digital
¡ Off
Lighting ¡ On during operation
¡ Off during operation
Childproof lock ¡ Button lock only
¡ Door lock and button lock
Automatic childproof
lock
¡ Deactivated
¡ Activated
Operation after
switch-on
¡ Main menu
¡ Types of heating
1
Depending on the appliance specifications
Basic setting Selection
Night-time dimming ¡ Switched off
¡ On (display dimmed
between 10 p.m. and 5.59
a.m.)
Brand logo ¡ Indicators/symbols
¡ Do not display
Fan run-on time ¡ Recommended
¡ Minimum
Pull-out rail system
1
¡ No (rack or single set of
pull-out rails fitted)
¡ Yes (two or three sets of
pull-out rails retrofitted)
Factory settings Load
1
Depending on the appliance specifications
12.2 Changing basic settings
1.
Press to switch the appliance on.
2.
Press .
3.
Use the or button to select "Settings" .
4.
Use the button to navigate to the next row.
5.
Use the or button to select a setting.
6.
Use the button to navigate to the next row.
7.
Use the or button to change the setting.
8.
Press .
9.
To save your settings, use the button to select
"Save".
‒ To discard your settings, use the button to se-
lect "Discard".