Installation Instruction
Table Of Contents
- Important information – fig. 1
- Appliance under worktop – fig. 2
- Power cable with a plug with earthing contact
- Power cable without a plug with earthing contact
- India only
- Securing the appliance – Fig. 5
- Caution!
- 1. If necessary, you can adjust the gap between the appliance door and the panels using the adjustment screws on the left and right (Fig. 5a).
- 2. Push the appliance in fully. Do not kink or trap the connection cable when doing so, or route it over sharp edges.
- 3. Centre the appliance (Fig. 5b).
- 4. Open the appliance door slightly and unscrew panels on the left and right (Fig. 5c).
- 5. Close the appliance door.
- 6. If necessary, you can adjust the height of the appliance door using the adjustment screws on the left and right (Fig. 5d).
- 7. Secure the appliance to the unit (Fig. 5e).
- 8. Open the appliance door slightly. Fit the panels and screw them in place again, first at the top and then at the bottom (Fig. 5f).
- Caution!
- Removal
*9001433261*
Ú ,QVWDOODWLRQLQVWUXFWLRQV
%
$
PLQ
PLQ
PD[
PLQ
PLQ
PLQ
PLQ