Operation Manual

en Operating the appliance
14
Changing or stopping the appliance
operation
Changing the appliance operation
1. Use the # touch symbol to pause the operation.
2. Use the & or % button to navigate to the line for the
setting that should be changed.
3. Use the ( or ) button to change the setting.
4. Use the # touch button to start the changed
operation.
Notes
■ The cooling fan may continue to run while an
operation is interrupted.
■ After changing the temperature, the paused run time
continues. After changing the type of heating, the run
time starts again at zero.
Stopping the appliance operation
Touch the # touch button until the appliance operation
stops.
Note: Operating modes such as the cleaning function
cannot be stopped.
Heating up the appliance quickly
You can use the "Rapid heat-up" and "PowerBoost"
functions to reduce the preheat time. Whether the
appliance is preheated with the "Rapid heat-up" function
or the "PowerBoost" function depends on the type of
heating that has been set. With the "PowerBoost"
function, unlike with the "Rapid heat-up" function, you
can place your food into the cold cooking compartment
even before preheating has begun. Only cook on one
level when using the "PowerBoost" function.
Notes
■ If the ° touch button is lit, the "Rapid heat-up" or
"PowerBoost" function can be activated.
■ To deactivate the "Rapid heat-up" or "PowerBoost"
function before it has finished, touch the ° touch
button.
Activating the "Rapid heat-up" function
1. Set top/bottom heating ƒ and the temperature.
Note: Set a temperature above 100 °C to allow the
appliance to preheat quickly.
2. Touch the # touch button to start the appliance
operation.
3. Touch the ° touch button to activate the "Rapid
heat-up" function.
The ° symbol appears on the display.
4. Once the set temperature has been reached, the
"Rapid heat-up" function switches itself off
automatically. The ° symbol disappears from the
display. Place the food in the cooking compartment
Activating the "PowerBoost" function
1. Set CircoTherm hot air ‚ or the bread baking
setting … and the temperature.
Note: Set a temperature above 100 °C to allow the
appliance to preheat quickly.
2. Place the food on a single level in the cooking
compartment.
3. Touch the # touch button to start the appliance
operation.
4. Touch the ° touch button to activate the
"PowerBoost" function.
The ° symbol appears on the display.
Once the set temperature has been reached, the
"PowerBoost" function switches itself off
automatically. The ° symbol disappears from the
display.
Function Type of heating Place the food in
the cooking
compartment
Rapid heat-up Top/bottom heating ƒ after preheating
PowerBoost* CircoTherm hot air ‚ before preheating
Bread-baking setting …
* Do not use more than one level for cooking