Oven [en] User manual and installation instructions B57CR23.
en Safety Table of contents USER MANUAL 1 Safety .................................................................... 2 2 Preventing material damage ............................... 4 3 Environmental protection and saving energy ....................................................................... 5 4 Familiarising yourself with your appliance ........ 6 5 Accessories.......................................................... 8 6 Before using for the first time ...........................
Safety en contact with the heating element and catch fire. ▶ Never place greaseproof paper loosely over accessories when preheating the appliance and while cooking. ▶ Always cut greaseproof paper to size and use a plate or baking tin to hold it down. The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. ▶ Keep your hands away from the hinges. Components inside the appliance door may have sharp edges. ▶ Wear protective gloves.
en Preventing material damage ▶ Do not let children play with packaging material. Children may breathe in or swallow small parts, causing them to suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. ▶ Keep children at a safe distance. If the door seal is damaged, a large amount of heat is generated around the door. ▶ Do not scrub or remove the seal. ▶ Never operate the appliance if the seal is damaged or missing. 1.
Environmental protection and saving energy en ▶ Do not store food in the cooking compartment. ▶ Remove all food remnants from the cooking com- Leaving the appliance to cool down with the door open will damage the front of neighbouring kitchen units over time. ▶ Always allow the cooking compartment to cool down with the door closed after cooking at high temperatures. ▶ Take care not to trap anything in the appliance door.
en Familiarising yourself with your appliance 4 Familiarising yourself with your appliance 4.1 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. 1 2 1 Display 3 2 2 3 Buttons Control element 4.2 Buttons The buttons are touch-sensitive areas. To select a function, press the corresponding button.
Familiarising yourself with your appliance Button Name Right Use Navigate to the right on the display Up Navigate upwards on the display Down Navigate downwards on the display en 4.4 Display The display shows the current settings, options or relevant information. 4.5 Main menu The main menu provides an overview of your appliance's functions. Press the button to open the main menu.
en Accessories Symbol Heating function Top/bottom heating eco Temperature 50 - 275 °C CircoTherm eco 40 - 200 °C Use For gently cooking selected types of food. Heat is emitted from above and below. This type of heating is most effective between 150 and 250 °C. This type of heating is used to determine the energy consumption in the conventional mode. For gently cooking selected types of food on one level without preheating.
Accessories Accessories Wire rack Universal pan Accessory support 5.1 Locking function The locking function prevents the accessories from tilting when they are pulled out. You can pull out the accessories approximately halfway without them tipping. The accessories must be inserted into the cooking compartment correctly for the tilt protection to work properly. en Use ¡ Cake tins ¡ Ovenproof dishes ¡ Cookware ¡ Meat, e.g.
en Before using for the first time 5.3 Other accessories You can purchase other accessories from our aftersales service, specialist retailers or online. You will find a comprehensive range of products for your appliance in our brochures and online: www.neff-international.com Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance.
Time-setting options en 7.3 Residual heat indicator 7.6 Changing the type of heating After you have switched off the appliance, the residual heat indicator will appear on the display. If you switch to a different heating function, the appliance will reset all the settings. 1. Press to pause operation. 2. Use the or button to select the required heating function. 3. Use the button to navigate to the next row. 4. Use the or button to select the required temperature. 5.
en Childproof lock 3. Use the or button to select the timer duration. 4. Press to start the timer. will appear on the display. The timer duration will then count down. a Once the timer duration has elapsed, an audible signal will sound. 5. Press any button to end the audible signal. a 2. Use the button to set a cooking time of "00:00". a This cancels the current cooking time. 3. To continue without setting a cooking time, press . 8.
Rapid heat-up en 1. 2. 3. 4. 5. 6. 7. 8. a Press . Use the or button to select "Settings" . Use the button to navigate to the next row. Use the or button to select "Automatic childproof lock". Use the button to select the required settings. Use the button to set the lock to "Activated". Press . Use the button to save your settings. When you switch off the appliance, will appear on the display. 9.3 Interrupting the automatic childproof lock 1.
en Sabbath mode 10.5 Deactivating the "PowerBoost" function ▶ Use the button to deactivate the "PowerBoost" function early. 11 Sabbath mode You can set a cooking time of up to 74 hours using Sabbath mode. You can use top/bottom heating to keep food warm between 85 °C and 140 °C during this time without having to switch the appliance on or off. 11.1 Starting Sabbath mode Notes ¡ If you open the appliance door during operation, the appliance stops heating.
Cleaning and servicing en 12.3 Changing your favourites 7. Use the or button to select the required heating In Favourites, you can set the heating functions that you want to appear in the heating functions menu. Note: Some heating functions cannot be deactivated: ¡ CircoTherm hot air ¡ Circo-roasting ¡ Full-surface grill 8. Use the button to navigate to the next row. 9. Use the or button to select a setting. 1. 2. 3. 4. 5. 6. Press to switch the appliance on. Press .
en Cleaning and servicing Area Door cover Stainless steel interior door frame Door handle Door seal Suitable cleaning agents ¡ Made of stainless steel: Stainless steel cleaner ¡ Made of plastic: Hot soapy water Stainless steel cleaner ¡ Hot soapy water ¡ Hot soapy water Information Do not use glass cleaner or a glass scraper. Do not use stainless steel care products. Tip: Remove the door cover for thorough cleaning. → "Appliance door", Page 19 Discolouration can be removed using stainless steel cleaner.
Cleaning functions en 14 Cleaning functions You can use the cleaning functions to clean the appliance. Note: The vertical bar must be to the front of the accessory supports. 14.1 Self-cleaning function The "Self-cleaning" function cleans the cooking compartment virtually automatically. Use this cleaning function to clean the cooking compartment every 2 to 3 months. You can use the cleaning function more often, if required. The cleaning function requires approx. 2.5 - 4.7 kilowatt hours.
en Cleaning functions Cleaning setting 1 2 3 a 6. a a a 7. 8. Cleaning level Low Medium High Duration in hours Approx. 1:15 Approx. 1:30 Approx. 2:00 Select a higher cleaning setting if the cooking compartment is particularly dirty or has not been cleaned for a while. You cannot change the duration of the cleaning function. Once the cleaning function is in progress, you cannot change the cleaning setting. The duration of the cleaning setting will appear on the display.
Rails en 15 Rails To thoroughly clean the rails and the cooking compartment, or to replace the rails, you can remove the rails. 15.1 Detaching the rails WARNING ‒ Risk of burns! The shelf supports get very hot ▶ Never touch the shelf supports when hot. ▶ Always allow the appliance to cool down. ▶ Keep children at a safe distance. 1. Lift the rail forwards slightly and detach it . 2. Pull the whole rail to the front and remove it. 15.
en Appliance door 2. Hold the screwdriver horizontally and use it to push the door lock (black component) on each side of the door upwards as far as it will go . 4. Insert the coin in the gap in the lock and rotate as far as it will go . ‒ Turn the lock on the left-hand side in a clockwise direction. ‒ Turn the lock on the right-hand side in an anticlockwise direction. Door lock open Left-hand lock secured The arrows point to each other Door lock closed Left-hand lock released 3.
Appliance door 6. WARNING ‒ Risk of injury! The appliance door has a weight of 7–10 kg and may fall if it is not handled carefully. ▶ Handle the appliance door carefully. The door handle is not suitable for carrying the appliance door. The door handle may break off. ▶ Never carry the appliance door by the door handle. ▶ Grab hold of the appliance door with both hands on the left and right to carry it.
en Appliance door 16.3 Removing the door panes 6. Lift the first and second intermediate panes from be- low . To facilitate cleaning, you can remove the door pane. and remove them in the direction of the arrow WARNING ‒ Risk of injury! Components inside the appliance door may have sharp edges. ▶ Wear protective gloves. Requirement: The appliance door is detached. 1. Lay the appliance door with the front side facing down on a flat surface that is soft and clean. 2.
Appliance door 1. Tip: When fitting the door panes, make sure that they are in the original order. Insert the intermediate pane so that the the right-hand side is pointing upwards. en 5. Push down lightly on the first intermediate pane around , slide the retainer in at an angle and push down until it clicks into place. arrow on a The retainer has been inserted. 2. Check the fit of the four spacers and two seals.
en Troubleshooting 8. Insert the inner pane with the holder into the opening. 9. Screw both screws back in on the left and right of the appliance door. 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. WARNING ‒ Risk of injury! Improper repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff.
Troubleshooting en Fault Time not displayed when appliance switched off. Cause and troubleshooting Basic setting has been changed. ▶ Change the basic setting for the clock display. → "Basic settings", Page 14 Appliance door cannot be opened. The cleaning function locks the appliance door; is lit on the display. ▶ Allow the appliance to cool down until goes out on the display. → "Self-cleaning function", Page 17 The childproof lock locks the appliance door.
en Disposal 4. Insert the new halogen lamp and press it firmly into the socket. Make sure the pins are positioned correctly. 5. Depending on the appliance model, the glass cover may have a sealing ring. Put the sealing ring in position. 6. Screw the glass cover on. 7. Take the tea towel out of the cooking compartment. 8. Connect the appliance to the power supply. 18 Disposal Find out here how to dispose of old appliances correctly. 18.
How it works ¡ If you are cooking bakes directly in the universal pan, place the universal pan into the cooking compartment at level 2. ¡ The setting values for bread dough apply to both dough placed on a baking tray and dough placed in a loaf tin. Cooking time range, e.g. 10-15: ¡ Your food will be ready within the specified range of time (in minutes). Roasting on the wire rack Shelf position 2 Food roasted on the wire rack will become very crispy on all sides.
en How it works ¡ Place the food to be grilled directly onto the wire rack. ¡ To catch any liquids that drip down, place the universal pan into the cooking compartment at least one level below the wire rack. Notes ¡ The grill element switches on and off continuously. This is normal. The temperature that you set determines how frequently this occurs. ¡ Smoke may be produced when grilling. 20.4 Cooking instructions for ready meals ¡ The cooking result greatly depends on the quality of the food.
How it works Food en Accessory/cookware Shelf pos- Heating ition function → Page 7 4 pcs 3+1 Baking tin, dia.
en How it works 6. After low temperature cooking, remove the meat Slow cooking from the cooking compartment. Cook prime cuts of meat slowly at a low temperature, e.g. tender cuts of beef, veal, lamb or poultry. Tips for slow cooking Here you will find tips for achieving good results when slow cooking food. Low temperature cooking poultry or meat Note: When using the low temperature cooking type of heating, you cannot delay the start of the programme by setting an end time.
How it works en 20.7 Test dishes The information in this section is provided for test institutes to facilitate testing of the appliance in accordance with EN 60350‑1. Baking ¡ The setting values apply to food that is placed into a cold cooking compartment. ¡ Please take note of the information on preheating in the recommended settings tables. These setting values assume that the rapid heat-up function is not being used. ¡ For baking, use the lower of the specified temperatures to start with.
en Installation instructions Recommended settings for grilling Food Toasting bread 1 Do not preheat the appliance. Accessory/cookware Shelf pos- Heating ition function → Page 7 Wire rack 4 Temperature in Cooking time in °C mins 290 1 4-6 21 Installation instructions Observe this information when installing the appliance. 21.1 General installation instructions Follow these instructions before you start with the installation of the appliance.
Installation instructions ATTENTION! Carrying the appliance by the door handle could break it. The door handle cannot support the weight of the appliance. ▶ Do not carry or hold the appliance by the door handle. en 21.3 Installation below a worktop Observe the installation dimensions and the installation instructions when installing below a worktop. 21.
en Installation instructions 21.5 Installation in a tall unit Observe the installation dimensions and the installation instructions when installing in a tall unit. ¡ To ventilate the appliance, the intermediate floors must have a ventilation cut-out. ¡ If the tall unit has another back panel in addition to the element back panels, this must be removed. ¡ Only fit the appliance up to a height which allows accessories to be easily removed.
Installation instructions ¡ Contact protection must be guaranteed by the installation. en 3. Centre the appliance. Electrically connect the appliance with the protective contact plug Note: The appliance must only be connected to a protective contact socket that has been correctly installed. ▶ Insert the plug into the protective contact socket. When the appliance is installed, the mains plug of the power cord must be freely accessible.
en Installation instructions 7. Screw the appliance into place. 8. For handleless kitchens with vertical bar handle strips: ‒ Attach a suitable filling piece in order to cover any sharp edges and to guarantee a safe installation. ‒ Pre-drill aluminium profiles to establish a screw connection . ‒ Secure the appliance using a suitable screw . 9. Open the appliance door slightly, then refit the pan- els and screw them in place, first at the top and then at the bottom.
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.
