Installation Instruction

en Basic operation
12
8.
Use the button to select the next setting.
9.
Use the button to navigate to the next row.
10.
Use the or button to select the correct year.
11.
Use the button to navigate back to the top row.
12.
Use the button to select the next setting.
Setting the water hardness
1.
Use the button to navigate to the bottom row.
2.
Use the or button to select the water hardness
range.
→"Before using for the first time", Page11
3.
Use the button to navigate back to the top row.
4.
Use the button to save your settings.
5.
Open and close the appliance door once.
a The appliance will perform a self-test, after which it
will be ready to use.
a Initial configuration is now complete.
6.3 Cleaning the appliance
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
Remove the product information, accessories and
any leftover packaging (e.g. polystyrene pellets)
from the cooking compartment.
2.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Press to switch the appliance on.
→"Switching on the appliance", Page12
4.
Fill the water tank.
→"Filling the water tank", Page13
5.
Set the required heating function, temperature and
steam assistance for the heat-up process and press
to start.
→"Setting the type of heating and temperature",
Page12
→"Steam-assisted cooking", Page14
Heating up
Heating function CircoTherm hot air
with steam assistance
, steam intensity "High"
Temperature Maximum
Cooking time 1hour
6.
Keep the kitchen ventilated while the appliance is
heating.
7.
Press to switch off the appliance after 1hour.
→"Switching off the appliance", Page12
8.
Allow the appliance to cool down.
9.
Clean the smooth surfaces with soapy water and a
dish cloth.
10.
Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page15
11.
Thoroughly clean any accessories you used with
soapy water and a dish cloth.
7 Basic operation
7.1 Switching on the appliance
▶
Press to switch the appliance on.
Notes
¡ In the basic settings, you can specify whether the
heating functions or the main menu should appear
when you switch on the appliance.
→"Basic settings", Page19
¡ If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
7.2 Switching off the appliance
▶
Press to switch the appliance off.
Notes
¡ The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→"Residual heat indicator", Page12
¡ The cooling fan will continue to run until the cooking
compartment has cooled down.
→"Cooling fan", Page9
7.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
Display Meaning
-H- Residual heat high (over 120°C)
-h- Residual heat low (between 60 and
120°C)
7.4 Setting the type of heating and
temperature
1.
Press to switch the appliance on.
a The heating functions will then be displayed.
2.
Use the or button to select the required heating
function.
3.
Use the button to navigate to the next row.
4.
Use the or button to select the required temperat-
ure or setting.
5.
Press to start.
a The cooking time will appear on the display.
a The heat-up indicator bar visualises the rising tem-
perature.
6.
When the food is ready, press to switch the appli-
ance off.