User Manual

Appliance door en

Removal

Note: Lay the removed glass panels on an even, soft

and clean surface.

1. Remove the appliance door.

2. Lay the appliance door with the front side facing

down on an even, soft and clean surface.

3. Push on the left- and right-hand side on the outside

of the appliance door until the inner glass is

released on both sides (fig. !).

4. Carefully lift the inner glass and remove it in the

direction of the arrow (fig. ").

5. Hold the reflector ‚ in the area ƒ on the left- and

right-hand side, and carefully lift it upwards (fig. #).

6. Lift the reflector ‚ up and out (fig. $).

7. Remove the second reflector in the same way as the

first.

8. Push the intermediate panel downwards in the area

„, carefully lift the holder … until it can be pulled out

(fig. %).

9. Lift the first and second intermediate panels from

below (fig. &) and remove them in the direction of

the arrow (fig. ').

10. If required, remove the spacers (fig. () and seals

(fig. )) for cleaning.

11. Clean the glass door panels and reflectors on both

sides with glass cleaner and a soft cloth.

:Warning

Risk of injury!

Scratched glass in the appliance door may develop

into a crack. Do not use a glass scraper, or sharp or

abrasive cleaning aids or detergents.

Caution!

Damage to the lighting. Do not clean or touch either

of the LEDs ‚. Both LEDs are on the right and left in

the appliance door.

12. Dry and refit the door panels.













