Operation Manual

8
Before using the appliance for the first time
In this section, you can read about
ʋ How to set the clock after connecting up your appliance
ʋ How to clean your appliance before using it for the first time
Setting the clock
Note: When you press the .- clock function button, you have
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
¯:¯¯ flashes in the clock display.
1. Briefly press the .- clock function button to go to the
setting mode.
The
.- and  symbols light up. ³:¯¯ appears in the
clock display.
2. Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.
Changing the clock
To subsequently change the time, press the
.-clock function
button repeatedly until the
.- and  symbols light up again.
Change the time with the rotary selector.
Cleaning the appliance
Clean your appliance before using it for the first time.
1. Remove the accessories from the cooking compartment.
2. Completely remove any residual packaging (e.g. chips of
polystyrene) from the cooking compartment.
3. Clean the accessories and cooking compartment with hot
soapy water (see section: Cleaning and care).
4. Heat with  Top/bottom heat at 240 °C for 60 minutes.
5. Afterwards, wipe the cooled cooking compartment with hot,
soapy water.
6. Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you can read about
ʋ how to switch your appliance on and off
ʋ how to select an operating mode and temperature
ʋ how you can change the basic settings
ʋ when your appliance switches off automatically
Switching on the appliance
1. Turn the operating mode selector until the desired operating
mode is selected.
A default temperature appears on the temperature display.
2. Turn the temperature selector to change the default
temperature.
Notes
ʋ The ! EasyClean® and  Low-temperature cooking
operating modes can only be started if neither
 nor ¤ are
shown in the temperature display.
ʋ If no default temperature is displayed, the temperature of your
selected operating mode is a fixed setting. You cannot
change this temperature.
Retrofit kit, CLOU 2x telescopic railings Z1762X2
Bread-baking stone Z1912X0
Optional accessories Order no.
Operating mode Default temper-
ature in °C
Temperature
range in °C

CircoTherm® 160 40 - 200

Top/bottom heating 170 50 - 275

CircoTherm intensive 220 50 - 275

Circo-roasting 170 50 - 250

Full-surface grill 220 50 - 275
Full-surface grill
(intensive)*
Fixed setting

Centre area grill 180 50 - 275
Centre-area grill
(intensive)*
Fixed setting

Bottom heat 200 50 - 225
* Turn the temperature selector beyond 275 °C.
³ appears
in the temperature display