Instruction manual
Table Of Contents
- [en] Instruction manual
- Table of contents
- [en] Instruction manual
- ( Important safety information 5
- ] Causes of damage 7
- 7 Environmental protection 8
- * Getting to know your appliance 9
- _ Accessories 11
- K Before using for the first time 13
- 1 Operating the appliance 14
- O Time-setting options 15
- A Childproof lock 16
- ^ Microwave 17
- Q Basic settings 19
- F Sabbath mode 20
- D Cleaning agent 21
- . Cleaning function 23
- p Rails 24
- q Appliance door 25
- 3 Trouble shooting 28
- 4 Customer service 29
- n Baking and roasting assistant 29
- P Programmes 30
- J Tested for you in our cooking studio 31
- 8 Intended use
- ( Important safety information
- ] Causes of damage
- 7 Environmental protection
- * Getting to know your appliance
- _ Accessories
- K Before using for the first time
- Before using for the first time
- Initial use
- 2. Use the ( or ) button to select the language.
- 3. Use the % button to return to "Language".
- 4. Use the ) button to select the next setting.
- 2. Use the ( or ) button to select the current hour.
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the current minute.
- 5. Press the % button repeatedly until "Time" appears.
- 6. Use the ) button to select the next setting.
- 2. Use the ( or ) button to select the current day.
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the current month.
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select the current year.
- 7. Press the % button repeatedly until "Date" appears.
- 8. Use the ) button to apply the settings.
- 2. Remove leftover packaging, such as polystyrene pellets, from the cooking compartment.
- 3. Before heating the appliance, wipe the smooth surfaces in the cooking compartment with a soft, wet cloth.
- 4. Use the # touch button to switch on the appliance.
- 5. Set the heating type and temperature, then start the appliance operation. ~ "Setting and starting the appliance operation" on page 14
- 6. Keep the kitchen ventilated while the appliance is heating up.
- 7. Use the # touch button to switch off the appliance after the indicated cooking time.
- 8. Wait until the cooking compartment has cooled down.
- 9. Clean the smooth surfaces with soapy water and a dish cloth.
- 1 Operating the appliance
- Operating the appliance
- Switching the appliance on and off
- Setting and starting the appliance operation
- 2. Use the ( or ) button to select the type of heating.
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the temperature.
- 5. Touch the # touch button to start the appliance operation.
- 2. Use the & or % button to navigate to the line for the setting that should be changed.
- 3. Use the ( or ) button to change the setting.
- 4. Use the # touch button to start the changed operation.
- 2. Touch the # touch button to start the appliance operation.
- 3. Touch the ° touch button to activate the "Rapid heating" function.
- 4. Once the set temperature has been reached, the "Rapid heating" function switches off automatically. The ° symbol disappears from the display. Place the food in the cooking compartment.
- O Time-setting options
- Time-setting options
- Time-setting option
- Use
- Note:
- Showing and hiding the time-setting options
- Setting the timer
- 2. Select the cooking time using the ) button.
- 3. Touch the 0 touch button to start the timer.
- 2. Set the type of heating and temperature.
- 3. Touch the 0 touch button.
- 4. Use the ( or ) button to set the cooking time.
- 5. Touch the # touch button to start the set cooking time.
- 2. Touch the # touch button.
- 3. Set the type of heating and temperature.
- 4. Touch the 0 touch button.
- 5. Select the cooking time using the ) button.
- 6. Use the & button to navigate to the "* Ready at" line.
- 7. Select the end time using the ) button.
- 8. Touch the # touch button.
- 2. Use the & or % button to navigate through the lines.
- 3. If necessary, change the setting using the ( or ) button. Set "00:00" to delete a time function.
- A Childproof lock
- Childproof lock
- Lock
- Activate/deactivate
- Note:
- Automatic childproof lock
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "MyProfile".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select "Automatic childproof lock".
- 6. Use the & button to navigate to the bottom line.
- 7. Use the ) button to select "Activated".
- 8. Touch the 0 touch button.
- 9. Use the & button to navigate to the next line to save the setting.
- 2. Touch the ± touch button.
- 3. Switch on the required appliance operation.
- 2. Touch the ± touch button.
- 3. Touch the 0 touch button.
- 4. Use the ( or ) button to select "MyProfile".
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select "Automatic childproof lock".
- 7. Use the & button to navigate to the bottom line.
- 8. Use the ( button to select "Deactivated".
- 9. Touch the 0 touch button.
- 10. Use the & button to navigate to the next line to save the setting.
- 11. Touch the ± touch button.
- 2. Press and hold the 0 touch button until "Childproof lock deactivated" appears on the display.
- ^ Microwave
- Microwave
- Cookware
- 2. Check the temperature of the cookware during this time.
- : Warning
- Risk of burns!
- Accessories included
- Microwave power settings
- Setting the microwave
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "Microwave •".
- 4. Use the & button to open the microwave menu.
- 5. Use the ( or ) button to set the required microwave output setting.
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to set the required cooking time.
- 8. Touch the # touch button to start the appliance operation.
- 2. Touch the # touch button to start the appliance operation.
- 2. Remove the worst dirt from the cooking compartment immediately and wipe away moisture from the cooking compartment floor.
- 3. If necessary, touch the # touch button to switch the appliance on.
- 4. Touch the 0 touch button to display the operating modes.
- 5. Use the ( or ) button to select "Drying ª".
- 6. Use the & button to navigate to the next line.
- 7. Use the & button to navigate to the next line.
- 8. Touch the # touch button.
- 9. Open the appliance door and leave it open for 1 to 2 minutes so that the moisture in the cooking compartment can escape.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "Microwave combination operation ¡".
- 4. Touch the & touch button.
- 5. Use the ( or ) touch button to set the required type of heating.
- 6. Use the & button to navigate to the next line.
- 7. Use the & button to navigate to the next line.
- 8. Use the & button to navigate to the next line.
- 9. Touch the # touch button.
- Q Basic settings
- Basic settings
- Changing MyProfile
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "MyProfile 4".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select the setting.
- 6. Use the & button to navigate to the selection.
- 7. Use the ( or ) button to select the setting.
- 8. Touch the 0 touch button.
- 9. To save the setting, use the & button to select "Save".
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "MyProfile 4".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select "Favourites".
- 6. Use the & button to select "Setting favourites".
- 7. Use the ( or ) button to select the heating type.
- 8. Use the & button to navigate to the next line.
- 9. Use the ( or ) button to select "Activated" or "Deactivated".
- 10. Touch the 0 touch button.
- 11. To save the setting, use the & button to select "Save".
- F Sabbath mode
- Sabbath mode
- Starting Sabbath mode
- 2. Use the ( or ) button to select "Sabbath mode".
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the temperature.
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select the cooking time.
- 7. Touch the # touch button.
- D Cleaning agent
- . Cleaning function
- Cleaning function
- : Warning
- Risk of scalding!
- Starting
- 2. Mix 0.4 litres of water (not distilled water) with a drop of washing-up liquid and pour into the middle of the cooking compartment floor.
- 3. Touch the # touch button.
- 4. Touch the 0 touch button.
- 5. Use the ( or ) button to select "EasyClean š".
- 6. Use the & button to navigate to the next line.
- 7. Touch the # touch button.
- 2. Clean the smooth surfaces in the cooking compartment with a dish cloth or a soft brush. Stubborn residues can be removed using a stainless steel scouring pad.
- 3. Remove limescale with a cloth soaked in vinegar. Then wipe with clean water and rub dry with a soft cloth (including under the door seal).
- 4. Use the # touch button to switch off the appliance.
- 5. Leave the appliance door ajar in the stop position (approx. 30°) for approx. 1 hour to allow the enamel surfaces in the cooking compartment to dry thoroughly.
- p Rails
- Rails
- Detaching and refitting the rails
- : Warning
- Risk of burns!
- Detaching the rails
- 2. and detach it (fig. ").
- 3. Then swing the entire rail outwards ‚ and detach it at the rear ƒ (fig. #).
- 2. Use the hook to mount the front holder at the top into the round hole ‚, set it at a slight incline, attach it at the bottom, and straighten it ƒ (fig. ").
- 3. Use the hook to attach the rear holder into the upper hole ‚ and push it into the lower hole ƒ (fig. #).
- 2. Pull the rail forwards (fig. ").
- 3. Then fold it forwards and insert it (fig. #)
- 4. and push it downwards (fig. $).
- q Appliance door
- Appliance door
- Removing the door cover
- 2. Press on the right and left side of the cover (fig. !).
- 3. Remove the cover (fig. "). Close the appliance door carefully
- 4. Open the appliance door again slightly. Put the cover back in place and press on it until it clicks audibly into place (fig. #).
- 5. Close the appliance door.
- 2. Press on the right and left side of the cover (fig. !).
- 3. Remove the cover (fig. ").
- 4. Undo and remove the screws on the left and right of the appliance door (fig. #).
- 5. Before closing the door again, trap a tea towel that has been folded several times in the door (fig. $).
- 6. Push both retainers at the top of the intermediate panel upwards, but do not remove them (fig. %). Hold the panel with one hand. Take out the panel.
- : Warning
- : Warning
- Risk of injury!
- Fitting the door panels on the appliance
- 2. Push both retainers downwards (fig. ").
- 3. Insert the front panel downwards into the retainers (fig. #).
- 4. Close the front panel until both upper hooks are opposite the opening (fig. $).
- 5. Press the front panel down until it clicks audibly into place (fig. %).
- 6. Open the appliance door again slightly and remove the tea towel.
- 7. Screw both screws back in on the left and right.
- 8. Put the cover back in place and press on it until it clicks audibly into place (fig. &).
- 9. Close the appliance door.
- 3 Trouble shooting
- 4 Customer service
- n Baking and roasting assistant
- Baking and roasting assistant
- Information on the settings
- Selecting a meal
- Setting the food
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select the "Baking and roasting assistant".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select the required category.
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to select the required meal.
- 8. Use the & button to navigate to the next line.
- 9. If required, you can change the recommended settings. Touch the & button to do this.
- 10. Touch the # touch button to start the appliance operation.
- 2. If necessary, use the ( or ) button to change the recommended setting.
- 3. Touch the # touch button to start "Continue cooking".
- P Programmes
- Programmes
- Information on the settings
- Selecting a dish
- Setting the programme
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "Microwave programmes".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select the required microwave programme.
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to set the weight.
- 8. Firstly touch the % n button to navigate upwards and then touch the ) button to navigate to the next line.
- 9. Touch the # touch button to start the appliance operation.
- 2. If necessary, use the ( or ) button to change the recommended setting.
- 3. Touch the # touch button to start "Continue cooking".
- J Tested for you in our cooking studio
- Tested for you in our cooking studio
- Note:
- Silicone moulds
- Cakes and small baked items
- Bread and rolls
- Pizza, quiche and savoury cakes
- Bakes and soufflés
- Poultry
- Meat
- Fish
- Vegetables and side dishes
- Dessert
- 2. Stir in 150 g (chilled) yogurt.
- 3. Pour into cups or small jars and cover with cling film.
- 4. Place the cups or jars onto the cooking compartment floor and use the settings indicated in the table.
- 5. After preparation, leave the yogurt to cool in the refrigerator.
- 2. Pour the rice and milk into a tall container which is suitable for microwave use.
- 3. Use the settings indicated in the table.
- 4. As soon as the milk starts to rise, stir thoroughly and reduce the microwave power as indicated in the table.
- : Warning
- : Warning
- : Warning
- Risk of scalding!
- Caution!
- Recommended setting values
- Dish
- Cookware
- Shelf position
- Type of heating
- Temperature in °C
- MW power in watts
- Cooking time in mins.
- Keeping warm
- Test dishes
- Baking
- Notes
- Dish
- Accessories/cookware
- Shelf position
- Type of heating
- Temperature in °C
- Cooking time in mins.
- Grilling
- Dish
- Accessories
- Shelf position
- Type of heating
- Temperature in °C
- Cooking time in mins.
- Preparing food with a microwave
- Dish
- Accessories/cookware
- Shelf position
- Type of heating
- Temperature in °C
- MW power in watts
- Cooking time in mins.
- [en] Instruction manual
en Childproof lock
16
Setting the cooking time
Once the set cooking time has elapsed, the appliance
switches off automatically. The function can only be
used in combination with a type of heating.
1. Touch the # touch button.
2. Set the type of heating and temperature.
3. Touch the 0 touch button.
The time-setting options are shown in the display.
4. Use the ( or ) button to set the cooking time.
– Default value for the ( button = 10 minutes
– Default value for the ) button = 30 minutes
5. Touch the # touch button to start the set cooking
time.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the 0 touch button to end the
audible signal.
Start delay – "Ready at"
The appliance switches on automatically and switches
off at the preset end time.To do this, set the cooking
time and determine the end time for the operation.
The start delay can only be used in combination with a
type of heating.
Notes
■ Ensure that food is not left in the cooking
compartment for too long as it may spoil.
■ It is not possible to start every type of heating with a
start delay.
1. Slide food into the cooking compartment on a
suitable accessory and close the appliance door.
2. Touch the # touch button.
3. Set the type of heating and temperature.
4. Touch the 0 touch button.
The time-setting options are shown on the display.
5. Select the cooking time using the ) button.
6. Use the & button to navigate to the "* Ready at"
line.
7. Select the end time using the ) button.
8. Touch the # touch button.
The appliance waits until the appropriate time to start
the operation.
As soon as the end time has passed, a signal sounds
and the appliance stops the operation automatically. To
cancel the signal tone, touch the 0 touch button.
Checking, changing or deleting settings
1. Touch the 0 touch button.
The time-setting options are shown on the display.
2. Use the & or % button to navigate through the
lines.
3. If necessary, change the setting using the ( or )
button. Set "00:00" to delete a time function.
The setting is applied automatically.
AChildproof lock
Childproof lock
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
Your appliance has two different locks.
Note: As soon as you activate the childproof lock, the
control panel is locked. The 0 and # touch buttons
are not included.You can deactivate the childproof lock
at any time.
Automatic childproof lock
The control panel is locked so that the appliance cannot
be switched on. To switch it on, the automatic
childproof lock must be interrupted. After the appliance
operation, the control panel is locked automatically.
Activating
1. Touch the ± touch button.
2. Touch the 0 touch button.
3. Use the ( or ) button to select "MyProfile".
4. Use the & button to navigate to the next line.
5. Use the ( or ) button to select "Automatic childproof
lock".
6. Use the & button to navigate to the bottom line.
7. Use the ) button to select "Activated".
8. Touch the 0 touch button.
9. Use the & button to navigate to the next line to save
the setting.
The "Automatic childproof lock" is activated. The
1 symbol appears on the display after switching off
the appliance.
Cancelling
1. Press and hold the 0 touch button until "Childproof
lock deactivated" appears on the display.
2. Touch the ± touch button.
3. Switch on the required appliance operation.
Deactivating
1. Press and hold the 0 touch button until "Childproof
lock deactivated" appears on the display.
2. Touch the ± touch button.
3. Touch the 0 touch button.
4. Use the ( or ) button to select "MyProfile".
5. Use the & button to navigate to the next line.
6. Use the ( or ) button to select "Automatic childproof
lock".
7. Use the & button to navigate to the bottom line.
8. Use the ( button to select "Deactivated".
9. Touch the 0 touch button.
10. Use the & button to navigate to the next line to save
the setting.
The "Automatic childproof lock" is deactivated.
11. Touch the ± touch button.
Lock Activate/deactivate
Automatic childproof lock Via the MyProfile menu ~ "Basic
settings" on page 19
One-time childproof lock
Via the 0 touch button